From: Raymond <rayau@netvigator.com>
To: alsa-devel@lists.sourceforge.net
Cc: openvortex-dev@nongnu.org
Subject: Re: Re: Re: aplay - How to use device 3 of card 0 ?
Date: Tue, 08 Mar 2005 15:52:04 +0800 [thread overview]
Message-ID: <422D59A4.4020702@netvigator.com> (raw)
>> # aplay --verbose -d hw:0,3 piano.wav
>> Playing WAVE 'piano.wav' : Signed 16 bit Little Endian, Rate 44100
Hz, Mono
>> Plug PCM: Hardware PCM card 0 'au8830' device 0 subdevice 0
^^^^^^^^^
> It's already wrong. Instead of hw:0,3, plug layer is used.
> Do you have any definition in ~/.asoundrc or /etc/asound.state?
> Is /usr/share/alsa/alsa.conf is properly updated from the latest
> alsa-lib, too?
ALSA : alsa-driver-1.0.8, alsa-lib-1.0.8 and alsa-utils-1.0.8
with au88x0_iec958.patch ( replace SPDIF SR control by IEC958 control )
store/restore /etc/asound.state by alsactl /etc/modules.conf
post-install snd-au8830 /usr/sbin/alsactl restore 0
pre-remove snd-au8830 /usr/sbin/alsactl store 0
# strace aplay -d hw:0,3 piano.wav
execve("/usr/bin/aplay", ["aplay", "-d", "hw:0,3", "piano.wav"], [/* 35
vars */]) = 0
uname({sys="Linux", node="localhost.localdomain", ...}) = 0
brk(0) = 0x93ec000
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=82204, ...}) = 0
old_mmap(NULL, 82204, PROT_READ, MAP_PRIVATE, 3, 0) = 0xbf50f000
close(3) = 0
open("/usr/lib/libasound.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\337"...,
512) = 512fstat64(3, {st_mode=S_IFREG|0755, st_size=1845586, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0xbf50e000
old_mmap(NULL, 646688, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x136000
old_mmap(0x1d0000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x9a000) = 0x1d0000
close(3) = 0
mprotect(0xbfef8000, 4096,
PROT_READ|PROT_WRITE|PROT_EXEC|PROT_GROWSDOWN) = -1 EINVAL (Invalid
argument)
mprotect(0xbfef1000, 32768, PROT_READ|PROT_WRITE|PROT_EXEC) = -1 ENOMEM
(Cannot allocate memory)
mprotect(0xbfef5000, 16384, PROT_READ|PROT_WRITE|PROT_EXEC) = -1 ENOMEM
(Cannot allocate memory)
mprotect(0xbfef7000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC) = -1 ENOMEM
(Cannot allocate memory)
mprotect(0xbfef8000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
mprotect(0xbfef7000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC) = -1 ENOMEM
(Cannot allocate memory)
open("/lib/tls/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\365\202"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=213244, ...}) = 0
old_mmap(0x82c000, 138000, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x82c000
old_mmap(0x84d000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3,
0x20000) = 0x84d000
close(3) = 0
open("/lib/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\32\205"...,
512) = 512fstat64(3, {st_mode=S_IFREG|0755, st_size=16312, ...}) = 0
old_mmap(0x850000, 12148, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x850000
old_mmap(0x852000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3,
0x1000) = 0x852000
close(3) = 0
open("/lib/tls/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\367"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=101264, ...}) = 0
old_mmap(0x97b000, 62436, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x97b000
old_mmap(0x988000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3,
0xd000) = 0x988000
old_mmap(0x989000, 5092, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x989000
close(3) = 0
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`hp\000"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1578228, ...}) = 0
old_mmap(0x6f1000, 1281996, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x6f1000
old_mmap(0x824000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x132000) = 0x824000
old_mmap(0x828000, 8140, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x828000
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0xbf50d000
set_thread_area({entry_number:-1 -> 6, base_addr:0xbf50d640,
limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0xbf50f000, 82204) = 0
set_tid_address(0xbf50d688) = 4321
rt_sigaction(SIGRTMIN, {0x97f680, [], SA_RESTORER|SA_SIGINFO, 0x9860b0},
NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=10240*1024, rlim_max=RLIM_INFINITY}) = 0
brk(0) = 0x93ec000
brk(0x940d000) = 0x940d000
brk(0) = 0x940d000
stat64("/usr/share/alsa/alsa.conf", {st_mode=S_IFREG|0644, st_size=8010,
...}) = 0
open("/usr/share/alsa/alsa.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=8010, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf523000
read(3, "#\n# ALSA library configuration "..., 4096) = 4096
read(3, " FORMAT ]\n\t@args.FILE {\n\t\ttype s"..., 4096) = 3914
read(3, "", 4096) = 0
read(3, "", 4096) = 0
close(3) = 0
munmap(0xbf523000, 4096) = 0
futex(0x852f70, FUTEX_WAKE, 2147483647) = 0
access("/etc/asound.conf", R_OK) = -1 ENOENT (No such file or
directory)
access("/root/.asoundrc", R_OK) = -1 ENOENT (No such file or
directory)
open("/usr/share/alsa/cards/aliases.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1060, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf523000
read(3, "#\n# Define aliases for various "..., 4096) = 1060
open("/usr/share/alsa/pcm/default.conf", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=479, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf522000
read(4, "#\n# Default output\n#\n\npcm.!defau"..., 4096) = 479
read(4, "", 4096) = 0
close(4) = 0
munmap(0xbf522000, 4096) = 0
read(3, "", 4096) = 0
read(3, "", 4096) = 0
close(3) = 0
munmap(0xbf523000, 4096) = 0
open("/dev/snd/controlC0", O_RDONLY) = 3
close(3) = 0
stat64("/usr/share/alsa/alsa.conf", {st_mode=S_IFREG|0644, st_size=8010,
...}) = 0
open("/dev/snd/controlC0", O_RDONLY) = 3
close(3) = 0
open("/dev/snd/controlC0", O_RDWR) = 3
ioctl(3, USBDEVFS_CONTROL, 0xbfef861c) = 0
ioctl(3, UI_DEV_CREATE, 0xbfef8750) = 0
close(3) = 0
access("/usr/share/alsa/cards/AU8830.conf", R_OK) = 0
open("/usr/share/alsa/cards/AU8830.conf", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=561, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf523000
read(3, "#\n# Configuration for the AU8830"..., 4096) = 561
open("/usr/share/alsa/pcm/front.conf", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=596, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf522000
read(4, "#\n# Hardware output from front s"..., 4096) = 596
read(4, "", 4096) = 0
close(4) = 0
munmap(0xbf522000, 4096) = 0
open("/usr/share/alsa/pcm/surround40.conf", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=749, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf522000
read(4, "#\n# Hardware output from 4.0 sp"..., 4096) = 749
read(4, "", 4096) = 0
close(4) = 0
munmap(0xbf522000, 4096) = 0
open("/usr/share/alsa/pcm/iec958.conf", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=1030, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xbf522000
read(4, "#\n# Hardware output from iec958"..., 4096) = 1030
read(4, "", 4096) = 0
close(4) = 0
munmap(0xbf522000, 4096) = 0
read(3, "", 4096) = 0
read(3, "", 4096) = 0
close(3) = 0
munmap(0xbf523000, 4096) = 0
open("/dev/snd/controlC1", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC1", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/snd/controlC2", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC2", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/snd/controlC3", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/aloadC3", O_RDONLY) = -1 ENODEV (No such device)
open("/dev/snd/controlC4", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC4", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC5", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC5", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC6", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC7", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC7", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC8", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC8", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC9", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC9", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC10", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC10", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC11", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC11", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC12", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC12", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC13", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC13", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC14", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC14", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC15", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC15", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC16", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC16", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC17", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC17", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC18", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC18", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC19", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC19", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC20", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC20", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC21", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC21", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC22", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC22", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC23", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC23", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC24", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC24", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC25", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC25", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC26", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC26", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC27", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC27", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC28", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC28", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC29", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC29", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC30", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC30", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC31", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/aloadC31", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/dev/snd/controlC0", O_RDONLY) = 3
close(3) = 0
stat64("/usr/share/alsa/alsa.conf", {st_mode=S_IFREG|0644, st_size=8010,
...}) = 0
open("/dev/snd/controlC0", O_RDONLY) = 3
close(3) = 0
open("/dev/snd/controlC0", O_RDWR) = 3
ioctl(3, USBDEVFS_CONTROL, 0xbfef837c) = 0
ioctl(3, UI_DEV_CREATE, 0xbfef84b0) = 0
close(3) = 0
open("/dev/snd/controlC0", O_RDONLY) = 3
close(3) = 0
open("/dev/snd/controlC0", O_RDWR) = 3
ioctl(3, USBDEVFS_CONTROL, 0xbfef861c) = 0
ioctl(3, 0x40045532, 0xbfef8644) = 0
open("/dev/snd/pcmC0D0p", O_RDWR) = 4
close(3) = 0
ioctl(4, AGPIOC_ACQUIRE or APM_IOC_STANDBY, 0xbfef8510) = 0
fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
ioctl(4, AGPIOC_INFO, 0xbfef850c) = 0
ioctl(4, AGPIOC_RELEASE or APM_IOC_SUSPEND, 0xbfef8508) = 0
mmap2(NULL, 4096, PROT_READ, MAP_SHARED, 4, 0x80000) = 0xbf523000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0x81000) = 0xbf522000
ioctl(4, AGPIOC_ACQUIRE or APM_IOC_STANDBY, 0xbfef8ae0) = 0
rt_sigaction(SIGINT, {0x804abf8, [INT], SA_RESTORER|SA_RESTART,
0x718a58}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTERM, {0x804abf8, [TERM], SA_RESTORER|SA_RESTART,
0x718a58}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGABRT, {0x804abf8, [ABRT], SA_RESTORER|SA_RESTART,
0x718a58}, {SIG_DFL}, 8) = 0
open("piano.wav", O_RDONLY|O_LARGEFILE) = 3
read(3, "RIFF\260O\7\0WAVEfmt \20\0\0\0\1\0\1\0", 24) = 24
read(3, "D\254", 2) = 2
read(3, "\0\0\210X\1\0\2\0\20\0", 10) = 10
read(3, "data\214O\7\0", 8) = 8
write(2, "Playing WAVE \'piano.wav\' : ", 27Playing WAVE 'piano.wav' : )
= 27
write(2, "Signed 16 bit Little Endian, ", 29Signed 16 bit Little Endian,
) = 29
write(2, "Rate 44100 Hz, ", 15Rate 44100 Hz, ) = 15
write(2, "Mono", 4Mono) = 4
write(2, "\n", 1
) = 1
Only test the alsa-driver-1.0.8, have error when using cvs version.
#./cvscompile --with-cards=au8830 --with-sequencer=yes
...
make -C mpu401 modules
make[2]: Entering directory `/root/alsa/cvs/alsa-driver/drivers/mpu401'
gcc -D__KERNEL__ -DMODULE=1 -I/root/alsa/cvs/alsa-driver/include
-I/lib/modules/2.4.22-1.2199.nptl/build/include -O2
-mpreferred-stack-boundary=2 -march=i686 -DLINUX -Wall
-Wstrict-prototypes -fomit-frame-pointer -Wno-trigraphs -O2
-fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -nostdinc
-iwithprefix include -DEXPORT_SYMTAB -c mpu401_uart.c
In file included from mpu401_uart.c:1:
../../alsa-kernel/drivers/mpu401/mpu401_uart.c: In function
`snd_mpu401_uart_input_trigger':
../../alsa-kernel/drivers/mpu401/mpu401_uart.c:313: warning: implicit
declaration of function `spin_trylock_irqsave'
In file included from mpu401_uart.c:1:
../../alsa-kernel/drivers/mpu401/mpu401_uart.c:298: warning: `flags'
might be used uninitialized in this function
rm -f snd-mpu401-uart.o
ld -r -o snd-mpu401-uart.o mpu401_uart.o
make[2]: Leaving directory `/root/alsa/cvs/alsa-driver/drivers/mpu401'
...
#make install
..
/sbin/depmod -a 2.4.22-1.2199.nptl
depmod: *** Unresolved symbols in
/lib/modules/2.4.22-1.2199.nptl/kernel/sound/drivers/mpu401/snd-mpu401-uart.o
...
#/etc/init.d/alsasound start
Starting sound driver: snd-au8830
/lib/modules/2.4.22-1.2199.nptl/kernel/sound/drivers/mpu401/snd-mpu401-uart.o:
unresolved symbol spin_trylock_irqsave
/lib/modules/2.4.22-1.2199.nptl/kernel/sound/drivers/mpu401/snd-mpu401-uart.o:
insmod
/lib/modules/2.4.22-1.2199.nptl/kernel/sound/drivers/mpu401/snd-mpu401-uart.o
failed
/lib/modules/2.4.22-1.2199.nptl/kernel/sound/drivers/mpu401/snd-mpu401-uart.o:
insmod snd-au8830 failed
done
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
reply other threads:[~2005-03-08 7:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=422D59A4.4020702@netvigator.com \
--to=rayau@netvigator.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=openvortex-dev@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.