From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Doug Maxey <dwm@maxeymade.com>,
Linux IDE <linux-ide@vger.kernel.org>
Subject: [PATCH libata-2.6 1/5] Fix zero sg_dma_len() on 64-bit platform
Date: Fri, 18 Mar 2005 15:29:17 +0800 [thread overview]
Message-ID: <423A834D.5080407@tw.ibm.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2691 bytes --]
Hi Jeff,
When testing ATAPI PIO data transfer on the ppc64 platform, __atapi_pio_bytes() got zero when
sg_dma_len() is used. I checked the <asm-ppc64/scatterlish.h>, the struct scatterlist is defined as:
struct scatterlist {
struct page *page;
unsigned int offset;
unsigned int length;
/* For TCE support */
u32 dma_address;
u32 dma_length;
};
#define sg_dma_address(sg) ((sg)->dma_address)
#define sg_dma_len(sg) ((sg)->dma_length)
So, if the scatterlist is not DMA mapped, sg_dma_len() will return zero on ppc64.
The same problem should occur on the x86-64 platform.
On the i386 platform, sg_dma_len() returns sg->length, that's why the problem does not occur on an i386.
Changes:
- Use sg->length if the scatterlist is not DMA mapped (yet).
Attached please find the patch against the libata-2.6 tree for your review. Thanks.
Albert
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---------------------------------------
--- libata-2.6/drivers/scsi/libata-core.c 2005-03-17 16:42:32.000000000 +0800
+++ libata-2.6-sgdma/drivers/scsi/libata-core.c 2005-03-17 17:23:42.000000000 +0800
@@ -2071,7 +2071,7 @@
sg = qc->sg;
sg->page = virt_to_page(buf);
sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg_dma_len(sg) = buflen;
+ sg->length = buflen;
}
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
@@ -2101,11 +2101,12 @@
dma_addr_t dma_address;
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
- sg_dma_len(sg), dir);
+ sg->length, dir);
if (dma_mapping_error(dma_address))
return -1;
sg_dma_address(sg) = dma_address;
+ sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
@@ -2310,7 +2311,7 @@
qc->cursect++;
qc->cursg_ofs++;
- if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
+ if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2347,7 +2348,7 @@
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
- count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes);
+ count = min(sg->length - qc->cursg_ofs, bytes);
/* don't cross page boundaries */
count = min(count, (unsigned int)PAGE_SIZE - offset);
@@ -2358,7 +2359,7 @@
qc->curbytes += count;
qc->cursg_ofs += count;
- if (qc->cursg_ofs == sg_dma_len(sg)) {
+ if (qc->cursg_ofs == sg->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2371,7 +2372,7 @@
kunmap(page);
if (bytes) {
- if (qc->cursg_ofs < sg_dma_len(sg))
+ if (qc->cursg_ofs < sg->length)
goto next_page;
goto next_sg;
}
[-- Attachment #2: sg_dma_len.diff --]
[-- Type: text/plain, Size: 1723 bytes --]
--- libata-2.6/drivers/scsi/libata-core.c 2005-03-17 16:42:32.000000000 +0800
+++ libata-2.6-sgdma/drivers/scsi/libata-core.c 2005-03-17 17:23:42.000000000 +0800
@@ -2071,7 +2071,7 @@
sg = qc->sg;
sg->page = virt_to_page(buf);
sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg_dma_len(sg) = buflen;
+ sg->length = buflen;
}
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
@@ -2101,11 +2101,12 @@
dma_addr_t dma_address;
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
- sg_dma_len(sg), dir);
+ sg->length, dir);
if (dma_mapping_error(dma_address))
return -1;
sg_dma_address(sg) = dma_address;
+ sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
@@ -2310,7 +2311,7 @@
qc->cursect++;
qc->cursg_ofs++;
- if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) {
+ if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2347,7 +2348,7 @@
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
- count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes);
+ count = min(sg->length - qc->cursg_ofs, bytes);
/* don't cross page boundaries */
count = min(count, (unsigned int)PAGE_SIZE - offset);
@@ -2358,7 +2359,7 @@
qc->curbytes += count;
qc->cursg_ofs += count;
- if (qc->cursg_ofs == sg_dma_len(sg)) {
+ if (qc->cursg_ofs == sg->length) {
qc->cursg++;
qc->cursg_ofs = 0;
}
@@ -2371,7 +2372,7 @@
kunmap(page);
if (bytes) {
- if (qc->cursg_ofs < sg_dma_len(sg))
+ if (qc->cursg_ofs < sg->length)
goto next_page;
goto next_sg;
}
next reply other threads:[~2005-03-18 7:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-18 7:29 Albert Lee [this message]
2005-03-23 5:19 ` [PATCH libata-2.6 1/5] Fix zero sg_dma_len() on 64-bit platform Jeff Garzik
2005-05-26 7:52 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=423A834D.5080407@tw.ibm.com \
--to=albertcc@tw.ibm.com \
--cc=bzolnier@gmail.com \
--cc=dwm@maxeymade.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.