From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter plessas Subject: hdsploader on ppc Date: Sun, 20 Mar 2005 01:29:20 +0100 Message-ID: <423CC3E0.2020408@mur.at> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Dear list, this is a bit complicated, due to big/little endian issues, perhaps. I am trying to load the firmware into my hdsp pcmcia card. I am getting the fifo timeout: peter:~# hdsploader hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards : Card 0 : PowerMac Screamer Rev 0 Card 1 : RME Hammerfall DSP at 0xf3000000, irq 58 Upload firmware for card hw:1 Hwdep ioctl error on card hw:1 : Input/output error. I am using debian testing, running a 2.6.8 kernel with manually compiled 1.0.8 alsa drivers on a G3 powerpc laptop. cardbus version is 11 (rev 0b) the card is loadable out of osx. i am stuck here, and don't know what to do now, i also hope this topic suits to the alsa-devel list. any suggestions are very welcome! thanks, Peter ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click