From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter plessas Subject: [Fwd: Re: hdsploader on ppc] Date: Mon, 21 Mar 2005 23:16:35 +0100 Message-ID: <423F47C3.40704@mur.at> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi Takashi, Chis, dear list! Thanks for the information, i did an upgrade to a 2.6.11-5 kernel, and got alsa-drivers and -tools from the alsa-snapshots page, version 1.0.9rc1. I of course enabled the hotplug-fw-loader in the kernel. after one reboot, the card worked, even when going to computer suspend mode(!) and at re-inserting the card. But after i had one computer crash (i was unplugging the powersupply off the mutiface, the hotplug_fw loader is unable to load the card at boot-time, giving: -------------------------------------------------------------------- Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0001:10:1a.0 [0000:0000] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0001:10:1a.0, mfunc 0x00000002, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 58 Socket status: 30000069 PCI: Enabling device 0001:11:00.0 (0080 -> 0082) ieee1394: Initialized config rom entry `ip1394' ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:775: Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:656: Hammerfall-DSP: loading firmware ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:694: Hammerfall-DSP: finished firmware loading ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:775: Hammerfall-DSP: wait for FIFO status <= 127 failed after 5000 iterations ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:4852: Hammerfall-DSP: Error setting default values ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:4948: Hammerfall-DSP: error creating alsa devices ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:5059: Hammerfall-DSP: couldn't get firmware from userspace. try using hdsploader ALSA /usr/local/src/alsa-driver-1.0.9rc1/alsa-kernel/pci/rme9652/hdsp.c:5066: Hammerfall-DSP: card initialization pending : waiting for firmware RME Hammerfall DSP: probe of 0001:11:00.0 failed with error -16 ------------------------------------------------------------------- lspci sees the card, manually running hdsploader gives: user@gonzo:/usr/local/src$ hdsploader hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards : Card 0 : PowerMac Screamer Rev 0 (not seeing the card) i am fairly stuck here, any help would be appreciated! thanks! Peter ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click