From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Tue, 22 Mar 2005 21:34:37 +0000 Subject: Re: [LARTC] cbq configuration is needed Message-Id: <42408F6D.1080703@dsl.pipex.com> List-Id: References: <20050320143919.27464.qmail@web54703.mail.yahoo.com> In-Reply-To: <20050320143919.27464.qmail@web54703.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Alaios wrote: > Hi i need a cbq configuration that works and drops > packets if the flow exceeds an amount of data.. Do u > have any configuration that drops packets...? My cbq > configuraion doesnt drop packets... The traffic use > the correct class but seems that tha cbq is not able > to control correct the flow You can add a queue to a class so you can specify length - then when full you will drop. I guess your classes are rate limiting but the default length is too long to drop. See the HowTo example CBQ wondershaper - It adds sfqs you could add limit as a parameter to sfq - or add a different queue eg. p or bfifo. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc