From: Rich Townsend <rhdt-OBnUx95tOyn10jlvfTC4gA@public.gmane.org>
To: "François Valenduc" <fvalenduc-IWqWACnzNjyZIoH1IeqzKA@public.gmane.org>
Cc: Pedro Venda
<pjvenda-pQd4kjVL+RHfqL7NgpvPWWD2FQJk+8+b@public.gmane.org>,
acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: What's up with the Embedded Controller driver? [was Re: patched sms-cm acpi/ec.c to 2.6.11.5]
Date: Wed, 23 Mar 2005 14:19:37 -0500 [thread overview]
Message-ID: <4241C149.4070601@bartol.udel.edu> (raw)
In-Reply-To: <4241B236.40601-IWqWACnzNjyZIoH1IeqzKA@public.gmane.org>
François Valenduc wrote:
> Pedro Venda a écrit :
>
>
>>On Wednesday 23 March 2005 17:29, Rich Townsend wrote:
>>
>>
>>
>>>Hi Pedro --
>>>
>>>Sorry I didn't respond sooner; I've been very busy with my job. I'll
>>>check through this when I get a chance, and roll it into my sbs-cm stuff
>>>if it looks OK.
>>>
>>>
>>
>>hello rich,
>>
>>take your time. we're all doing what we can.
>>
>>it does NOT seem ok. after some more tests with the patch, I found out that
>>francois was right about most of the problems:
>>* timeout on boot, just after the boot loader. this is very confusing to me...
>>* when I plug in the battery, it takes ages to show information about it...
>>more than 1 minute.
>>* about the usb problems, apparently I wasn't affected.
>>
>>could you please tip us about what could be causing these delays? especially
>>the boot delay... it really puzzles my mind.
>>
>>regards,
>>pedro venda.
>>
>>
>
> Concerning USB problems, I think it happens because I tried the patch
> with the 2.6.11 kernel. I have retried with the 2.6.11.5 and there are
> no more USB problems. But all the other problems remains. Concerning the
> timeout on boot, could it be caused by the acpi-dsdt-initrd patch made
> by Markus Gaugausch. Maybe we should try other ways to incorporate the
> DSDT to the kernel.
> François Valenduc
I doubt it is the DSDT patch; rather, it looks like something has gone
wrong in the embedded controller driver in going from 2.6.10 to 2.6.11.
I've tried out a number of different ways of fixing ec event handling,
including my own spinlock kludge and Pedro's version of it, and also a
series of patches by Dmitry Torokhov; but all of them seem to have
problems with very sluggish EC response and/or EC timeouts (indicated by
"Handler for [EmbeddedControl] returned AE_TIME").
Who currently maintains ec.c? And what exactly has been done to it since
2.6.10?
cheers,
Rich
-------------------------------------------------------
This SF.net email is sponsored by Microsoft Mobile & Embedded DevCon 2005
Attend MEDC 2005 May 9-12 in Vegas. Learn more about the latest Windows
Embedded(r) & Windows Mobile(tm) platforms, applications & content. Register
by 3/29 & save $300 http://ads.osdn.com/?ad_idh83&alloc_id\x15149&op=click
next prev parent reply other threads:[~2005-03-23 19:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-21 16:14 patched sms-cm acpi/ec.c to 2.6.11.5 Pedro Venda
[not found] ` <423EF2EB.5030505-pQd4kjVL+REh2FBCd0jGRA@public.gmane.org>
2005-03-21 21:59 ` François Valenduc
[not found] ` <423F43A8.90005-IWqWACnzNjyZIoH1IeqzKA@public.gmane.org>
2005-03-21 23:03 ` Pedro Venda
2005-03-28 19:49 ` Rich Townsend
[not found] ` <42485FE2.8040702-OBnUx95tOyn10jlvfTC4gA@public.gmane.org>
2005-03-28 22:55 ` Pedro Venda
[not found] ` <4241A77B.1070807@bartol.udel.edu>
[not found] ` <4241A77B.1070807-OBnUx95tOyn10jlvfTC4gA@public.gmane.org>
2005-03-23 17:39 ` Pedro Venda
[not found] ` <200503231739.56592.pjvenda-pQd4kjVL+REh2FBCd0jGRA@public.gmane.org>
2005-03-23 18:15 ` François Valenduc
[not found] ` <4241B236.40601-IWqWACnzNjyZIoH1IeqzKA@public.gmane.org>
2005-03-23 19:19 ` Rich Townsend [this message]
[not found] ` <4241C149.4070601-OBnUx95tOyn10jlvfTC4gA@public.gmane.org>
2005-03-23 19:35 ` What's up with the Embedded Controller driver? [was Re: [ACPI] patched sms-cm acpi/ec.c to 2.6.11.5] François Valenduc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4241C149.4070601@bartol.udel.edu \
--to=rhdt-obnux95toyn10jlvftc4ga@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=fvalenduc-IWqWACnzNjyZIoH1IeqzKA@public.gmane.org \
--cc=pjvenda-pQd4kjVL+RHfqL7NgpvPWWD2FQJk+8+b@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.