All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Thonke <tk-shockwave@web.de>
To: Jacek Luczak <difrost@pin.if.uz.zgora.pl>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PCI-Express not working/unuseable on Intel 925XE Chipset since 2.6.12-rc1[mm1-4]
Date: Fri, 01 Apr 2005 18:07:58 +0200	[thread overview]
Message-ID: <424D71DE.5060703@web.de> (raw)
In-Reply-To: <424D5E2E.8040207@pin.if.uz.zgora.pl>

hello Jacek,

its not related to the vendor so far we are :-)
Maybe Andrew Morton or some other will read this. Because 2.6.12 should 
be a stable version not a flacky one. But what is wrong now on 
2.6.12-rc1 **. It work flawlessly on 2.6.11.X kernels.
Mebye we back that out :-)

Greetz


|Jacek Luczak schrieb:

> Michael Thonke napisał(a):
>
>> Hello,
>>
>> since the first version of 2.6.12-rc1 and mm[1-4] kernel I can't use any
>> of my PCI-Express devices that worked with all 2.6.11.[1-6] kernels. 
>> It's a real odd right now.
>>
>> I have 25 computers with an Intel 925XE Chipset based motherboards 
>> and Intel 6xx CPU on it. So far it does not metter which vendor I 
>> choose (ASUS,ABIT,MSI etc.) the problem stay the same and spread all 
>> over.I
>> tried to boot with pci=routeicq but it did not help to get one device
>> working with any 2.6.12-rc1-xx kernel. As I mentioned before I tested 
>> it with on several (over 25 computer) with various motherboards (with 
>> ASUS,ABIT,MSI etc.) no luck. Its an 64bit system with [EMT64] and 
>> SMP/SMT and preempt enabled + cpufreq.
>>
>> My first look was on PCI Routingtable and I found a difference to
>> 2.6.11.x working kernel:
>>
>
> I've got the same problem with i915 on Asus P5GDC V Deluxe Mainboard.
> This fragment of dmesg is from 2.6.12-rc1-mm4 kernel:
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> Boot video device is 0000:00:02.0
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Can't get handler for 0000:00:02.0
> ACPI: Can't get handler for 0000:00:02.1
> ACPI: Can't get handler for 0000:00:1b.0
> ACPI: Can't get handler for 0000:00:1f.3
> ACPI: Can't get handler for 0000:02:00.0
> ACPI: Can't get handler for 0000:01:04.0
> ACPI: Can't get handler for 0000:01:0a.0
> ACPI: Can't get handler for 0000:01:0b.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, 
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: No ACPI bus support for 00:00
> ACPI: No ACPI bus support for 00:01
> ACPI: No ACPI bus support for 00:02
> ACPI: No ACPI bus support for 00:03
> ACPI: No ACPI bus support for 00:04
> ACPI: No ACPI bus support for 00:05
> ACPI: No ACPI bus support for 00:06
> ACPI: No ACPI bus support for 00:07
> ACPI: No ACPI bus support for 00:08
> ACPI: No ACPI bus support for 00:09
> ACPI: No ACPI bus support for 00:0a
> ACPI: No ACPI bus support for 00:0b
> ACPI: No ACPI bus support for 00:0c
> ACPI: No ACPI bus support for 00:0d
> ACPI: No ACPI bus support for 00:0e
> ACPI: No ACPI bus support for 00:0f
> ACPI: No ACPI bus support for 00:10
> pnp: PnP ACPI: found 17 devices
> SCSI subsystem initialized
>
> LSPCI OUTPUT:
> 00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
>     Subsystem: Intel Corp.: Unknown device 2580
>     Flags: bus master, fast devsel, latency 0
>     Capabilities: [e0] #09 [2109]
>
> 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2582 
> (rev 04) (prog-if 00 [VGA])
>     Subsystem: Asustek Computer, Inc.: Unknown device 2582
>     Flags: bus master, fast devsel, latency 0, IRQ 16
>     Memory at cfc80000 (32-bit, non-prefetchable) [size=512K]
>     I/O ports at 9800 [size=8]
>     Memory at d0000000 (32-bit, prefetchable) [size=256M]
>     Memory at cfd80000 (32-bit, non-prefetchable) [size=256K]
>     Expansion ROM at <unassigned> [disabled]
>     Capabilities: [d0] Power Management version 2
>
> 00:02.1 Display controller: Intel Corp.: Unknown device 2782 (rev 04)
>     Subsystem: Asustek Computer, Inc.: Unknown device 2582
>     Flags: bus master, fast devsel, latency 0
>     Memory at cfd00000 (32-bit, non-prefetchable) [size=512K]
>     Capabilities: [d0] Power Management version 2
>
> 00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 03)
>     Subsystem: Asustek Computer, Inc.: Unknown device 813d
>     Flags: bus master, fast devsel, latency 0, IRQ 10
>     Memory at cfdf4000 (64-bit, non-prefetchable) [size=16K]
>     Capabilities: [50] Power Management version 2
>     Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 
> Enable-
>     Capabilities: [70] #10 [0091]
>
> 00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 
> (rev 03) (prog-if 00 [Normal decode])
>     Flags: bus master, fast devsel, latency 0
>     Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>     I/O behind bridge: 0000e000-0000efff
>     Capabilities: [40] #10 [0141]
>     Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 
> Enable-
>     Capabilities: [90] #0d [0000]
>     Capabilities: [a0] Power Management version 2
>
> 00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1 
> (rev 03) (prog-if 00 [Normal decode])
>     Flags: bus master, fast devsel, latency 0
>     Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>     I/O behind bridge: 0000d000-0000dfff
>     Memory behind bridge: cff00000-cfffffff
>     Capabilities: [40] #10 [0141]
>     Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 
> Enable-
>     Capabilities: [90] #0d [0000]
>     Capabilities: [a0] Power Management version 2
>
> 00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 
> (prog-if 00 [UHCI])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 23
>     I/O ports at 9880 [size=32]
>
> 00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 
> (prog-if 00 [UHCI])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 19
>     I/O ports at 9c00 [size=32]
>
> 00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 
> (prog-if 00 [UHCI])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 18
>     I/O ports at a000 [size=32]
>
> 00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 
> (prog-if 00 [UHCI])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 16
>     I/O ports at a080 [size=32]
>
> 00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03) 
> (prog-if 20 [EHCI])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 11
>     Memory at cfdff800 (32-bit, non-prefetchable) [size=1K]
>     Capabilities: [50] Power Management version 2
>     Capabilities: [58] #0a [20a0]
>
> 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to 
> PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
>     Flags: bus master, fast devsel, latency 0
>     Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>     I/O behind bridge: 0000b000-0000cfff
>     Memory behind bridge: cfe00000-cfefffff
>     Capabilities: [50] #0d [0000]
>
> 00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
>     Flags: bus master, medium devsel, latency 0
>
> 00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03) 
> (prog-if 8a [Master SecP PriP])
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: bus master, medium devsel, latency 0, IRQ 18
>     I/O ports at <unassigned>
>     I/O ports at <unassigned>
>     I/O ports at <unassigned>
>     I/O ports at <unassigned>
>     I/O ports at ffa0 [size=16]
>
> 00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=raid 
> (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
>     Subsystem: Asustek Computer, Inc.: Unknown device 2601
>     Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
>     I/O ports at ac00 [size=8]
>     I/O ports at a880 [size=4]
>     I/O ports at a800 [size=8]
>     I/O ports at a480 [size=4]
>     I/O ports at a400 [size=16]
>     Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
>     Capabilities: [70] Power Management version 2
>
> 00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
>     Subsystem: Asustek Computer, Inc.: Unknown device 80a6
>     Flags: medium devsel
>     I/O ports at 0400 [size=32]
>
> 01:04.0 Unknown mass storage controller: Integrated Technology 
> Express, Inc.: Unknown device 8212 (rev 13)
>     Subsystem: Asustek Computer, Inc.: Unknown device 813a
>     Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 11
>     I/O ports at cc00 [size=8]
>     I/O ports at c080 [size=4]
>     I/O ports at c000 [size=8]
>     I/O ports at bc00 [size=4]
>     I/O ports at b880 [size=16]
>     Expansion ROM at cfec0000 [disabled] [size=128K]
>     Capabilities: [80] Power Management version 2
>
> 01:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 
> (rev 10)
>     Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
>     Flags: bus master, medium devsel, latency 64, IRQ 21
>     I/O ports at c400 [size=256]
>     Capabilities: [c0] Power Management version 2
>
> 01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown 
> device 8180 (rev 20)
>     Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8180
>     Flags: bus master, medium devsel, latency 64, IRQ 22
>     I/O ports at c800 [size=256]
>     Memory at cfeffc00 (32-bit, non-prefetchable) [size=256]
>     Capabilities: [50] Power Management version 2
>
> 02:00.0 Ethernet controller: Marvell: Unknown device 4362 (rev 15)
>     Subsystem: Asustek Computer, Inc.: Unknown device 8142
>     Flags: bus master, fast devsel, latency 0, IRQ 17
>     Memory at cfffc000 (64-bit, non-prefetchable) [size=16K]
>     I/O ports at d800 [size=256]
>     Expansion ROM at cffc0000 [disabled] [size=128K]
>     Capabilities: [48] Power Management version 2
>     Capabilities: [50] Vital Product Data
>     Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 
> Enable-
>     Capabilities: [e0] #10 [0011]
>
>
>
>


  reply	other threads:[~2005-04-01 16:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-01 12:56 PCI-Express not working/unuseable on Intel 925XE Chipset since 2.6.12-rc1[mm1-4] Michael Thonke
2005-04-01 14:43 ` Jacek Luczak
2005-04-01 16:07   ` Michael Thonke [this message]
2005-04-01 18:23     ` Jacek Luczak
2005-04-01 19:01       ` Michael Thonke
2005-04-01 19:23         ` Jacek Luczak
2005-04-08 20:43           ` Bjorn Helgaas
2005-04-09  0:40             ` Jacek Luczak
2005-04-09  3:34               ` Bjorn Helgaas
2005-04-09 13:14                 ` [PATCH] Against sk98lin driver from syskonnect [was: Re: PCI-Express not working/unuseable on Intel 925XE since 2.6.12-rc1[mm1-4]] Jacek Luczak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=424D71DE.5060703@web.de \
    --to=tk-shockwave@web.de \
    --cc=difrost@pin.if.uz.zgora.pl \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.