From: Marco Gaddoni <marco.gaddoni@teknolab.net>
To: linux-kernel@vger.kernel.org
Subject: swsuspend scheduling while atomic
Date: Sun, 10 Apr 2005 20:07:59 +0200 [thread overview]
Message-ID: <42596B7F.4000808@teknolab.net> (raw)
Hello
i am playing a little with swsuspend and getting
"scheduling while atomic: bash/0x00000001/5244"
messages while the system is resuming.
Apparently the resume work correctly.
Do i have to fear for my data?
Some data about my system:
kernel 2.6.11.5
modules
Module Size Used by
it87 26204 0
eeprom 7632 0
i2c_sensor 3520 2 it87,eeprom
i2c_isa 1984 0
i2c_viapro 7888 0
tuner 22500 0
tvaudio 23588 0
bttv 155408 0
video_buf 22084 1 bttv
firmware_class 10688 1 bttv
i2c_algo_bit 9480 1 bttv
v4l2_common 5824 1 bttv
btcx_risc 4936 1 bttv
tveeprom 13144 1 bttv
i2c_core 23184 10
it87,eeprom,i2c_sensor,i2c_isa,i2c_viapro,tuner,tvaudio,bttv,i2c_algo_bit,tveeprom
videodev 10112 1 bttv
pci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738
(rev 10)
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 02)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 02)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA
RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[K8T800 South]0000:00:11.5 Multimedia audio controller: VIA
Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 78)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0326 (rev a1)
and finally the messages:
/visor.c: USB HandSpring Visor / Palm OS driver v2.1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13
09:39:32 2005 UTC).
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ALSA device list:
#0: C-Media PCI CMI8738-MC6 (model 55) at 0x9000, irq 17
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 MC97 UAR1 UAR2 ECP1
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
kjournald starting. Commit interval 5 seconds
Adding 1082584k swap on /dev/hdd4. Priority:-1 extents:1
Adding 297160k swap on /dev/hdb1. Priority:-2 extents:1
EXT3 FS on hdd1, internal journal
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xea000000
bttv0: detected: Terratec TValue (Philips PAL B/G) [card=33], PCI
subsystem ID is 153b:1117
bttv0: using: Terratec TerraTValue Version Bt878 [card=33,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffefff [init]
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
(PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878
#0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
it87: Found IT8705F chip at 0x290, revision 2
it87 2-0290: detected broken BIOS defaults, disabling pwm
interface<6>kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
Stopping tasks: ===========================================|
Freeing memory... done (18809 pages freed)
swsusp: Need to copy 9791 pages
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
APIC error on CPU0: 00(00)
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv0: reset, reinitialize
bttv0: PLL: 28636363 => 35468950 .<3>scheduling while atomic:
bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c011a5b5>] call_console_drivers+0x65/0x140
[<c0123775>] __mod_timer+0x1e5/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<e0921233>] set_pll+0x63/0x1a0 [bttv]
[<e09213b7>] bt848A_set_timing+0x47/0x140 [bttv]
[<e09219c7>] set_tvnorm+0x87/0xb0 [bttv]
[<e0921aa4>] set_input+0xb4/0xf0 [bttv]
[<e0921d57>] bttv_reinit_bt848+0x77/0xb0 [bttv]
[<e0927aca>] bttv_resume+0x4a/0x170 [bttv]
[<c02300a7>] kobject_get+0x17/0x20
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
.<3>scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c011a5b5>] call_console_drivers+0x65/0x140
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<e0921233>] set_pll+0x63/0x1a0 [bttv]
[<e09213b7>] bt848A_set_timing+0x47/0x140 [bttv]
[<e09219c7>] set_tvnorm+0x87/0xb0 [bttv]
[<e0921aa4>] set_input+0xb4/0xf0 [bttv]
[<e0921d57>] bttv_reinit_bt848+0x77/0xb0 [bttv]
[<e0927aca>] bttv_resume+0x4a/0x170 [bttv]
[<c02300a7>] kobject_get+0x17/0x20
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
ok
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<c023e550>] pci_set_power_state+0x190/0x1d0
[<c031b2f5>] usb_hcd_pci_resume+0x115/0x120
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<c023e550>] pci_set_power_state+0x190/0x1d0
[<c031b2f5>] usb_hcd_pci_resume+0x115/0x120
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<c023e550>] pci_set_power_state+0x190/0x1d0
[<c031b2f5>] usb_hcd_pci_resume+0x115/0x120
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<c023e550>] pci_set_power_state+0x190/0x1d0
[<c031b2f5>] usb_hcd_pci_resume+0x115/0x120
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c01236ce>] __mod_timer+0x13e/0x1f0
[<c0431b8d>] schedule_timeout+0x5d/0xb0
[<c01241e0>] process_timeout+0x0/0x10
[<c01245cf>] msleep+0x2f/0x40
[<c023e550>] pci_set_power_state+0x190/0x1d0
[<c031b2f5>] usb_hcd_pci_resume+0x115/0x120
[<c02408fc>] pci_device_resume+0x2c/0x40
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
ehci_hcd 0000:00:10.4: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c02e8524>] do_rw_taskfile+0x254/0x2b0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c04312e6>] wait_for_completion+0x86/0xf0
[<c0116910>] default_wake_function+0x0/0x20
[<c0116910>] default_wake_function+0x0/0x20
[<c02a7e29>] __elv_add_request+0x99/0xd0
[<c02e374f>] ide_do_drive_cmd+0x11f/0x170
[<c02e04c3>] generic_ide_resume+0x93/0xc0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c02300a7>] kobject_get+0x17/0x20
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c02e8524>] do_rw_taskfile+0x254/0x2b0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c04312e6>] wait_for_completion+0x86/0xf0
[<c0116910>] default_wake_function+0x0/0x20
[<c0116910>] default_wake_function+0x0/0x20
[<c02a7e29>] __elv_add_request+0x99/0xd0
[<c02e374f>] ide_do_drive_cmd+0x11f/0x170
[<c02e04c3>] generic_ide_resume+0x93/0xc0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c02300a7>] kobject_get+0x17/0x20
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c02e8524>] do_rw_taskfile+0x254/0x2b0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c04312e6>] wait_for_completion+0x86/0xf0
[<c0116910>] default_wake_function+0x0/0x20
[<c0116910>] default_wake_function+0x0/0x20
[<c02a7e29>] __elv_add_request+0x99/0xd0
[<c02e374f>] ide_do_drive_cmd+0x11f/0x170
[<c02e04c3>] generic_ide_resume+0x93/0xc0
[<c02e8710>] task_no_data_intr+0x0/0xb0
[<c02300a7>] kobject_get+0x17/0x20
[<c02a7498>] dpm_resume+0xa8/0xb0
[<c02a74b1>] device_resume+0x11/0x20
[<c0137778>] finish+0x8/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
Restarting tasks...<3>scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c0115e4e>] wake_up_process+0x1e/0x20
[<c0136310>] thaw_processes+0xb0/0xf0
[<c0137786>] finish+0x16/0x40
[<c013789e>] pm_suspend_disk+0x3e/0x80
[<c0135e75>] enter_state+0x75/0x80
[<c013e59f>] __alloc_pages+0x18f/0x410
[<c0135fc2>] state_store+0xa2/0xb5
[<c0194c65>] subsys_attr_store+0x35/0x40
[<c0194f0e>] flush_write_buffer+0x3e/0x50
[<c0194f74>] sysfs_write_file+0x54/0x80
[<c015a4fc>] vfs_write+0x14c/0x160
[<c015a5e1>] sys_write+0x51/0x80
[<c010330f>] syscall_call+0x7/0xb
usb 3-1: USB disconnect, address 2
done
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c015a5e1>] sys_write+0x51/0x80
[<c0103336>] work_resched+0x5/0x16
scheduling while atomic: bash/0x00000001/4686
[<c04310ef>] schedule+0x44f/0x500
[<c011751a>] sys_sched_yield+0x5a/0x80
[<c0167012>] coredump_wait+0x32/0xa0
[<c016716c>] do_coredump+0xec/0x226
[<c0115e6a>] wake_up_state+0x1a/0x20
[<c012515e>] signal_wake_up+0x1e/0x20
[<c01256f9>] specific_send_sig_info+0xc9/0xd0
[<c01246cc>] free_uid+0x1c/0x80
[<c0124ff5>] __dequeue_signal+0x105/0x180
[<c01250a5>] dequeue_signal+0x35/0xd0
[<c012709f>] get_signal_to_deliver+0x2ef/0x340
[<c01030dd>] do_signal+0x9d/0x170
[<c0103fe5>] show_trace+0x35/0x90
[<c0103fe5>] show_trace+0x35/0x90
[<c0103336>] work_resched+0x5/0x16
[<c0116140>] finish_task_switch+0x30/0x90
[<c0430f64>] schedule+0x2c4/0x500
[<c01148b0>] do_page_fault+0x0/0x5e3
[<c01031e7>] do_notify_resume+0x37/0x3c
[<c010335a>] work_notifysig+0x13/0x15
note: bash[4686] exited with preempt_count 1
usb 3-1: new low speed USB device using uhci_hcd and address 3
input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on
usb-0000:00:10.1-1
...
Please cc me in your replys as i am not subscibed to linux-kernel.
Ciao, Marco.
P.S. The mailing list for swsuspend in the MANTAINERS file seem to be
dead 2 years ago...
next reply other threads:[~2005-04-10 18:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-10 18:07 Marco Gaddoni [this message]
2005-04-14 8:17 ` swsuspend scheduling while atomic Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42596B7F.4000808@teknolab.net \
--to=marco.gaddoni@teknolab.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.