From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <425A8687.3010200@domain.hid> Date: Mon, 11 Apr 2005 16:15:35 +0200 From: Philippe Gerum MIME-Version: 1.0 References: <200504011643.38582.lbocseg@domain.hid> <200504061337.16492.lbocseg@domain.hid> <200504081512.16320.lbocseg@domain.hid> <4257C2C3.7030906@domain.hid> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [Adeos-main] Re: adeos-linux-2.6.11-i386-r10c2.patch [Some progress] Sender: adeos-main-admin@domain.hid Errors-To: adeos-main-admin@domain.hid List-Help: List-Post: List-Subscribe: , List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: To: "Rus V. Brushkoff" Cc: rtai@domain.hid, adeos-main@gna.org Rus V. Brushkoff wrote: > Hi. > [...] > > :o APIC, no IO-APIC, Adeos built into the kernel, ACPI disabled > > Well with ACPI totally disabled Adeos-10rc2 works on my intel m/b ! I > have working all peripheria connected to ICH chipset. X11 over nvidia kernel > driver is works too. Now it is doesn't matter if adeos compiled as module > or not. Ok, it's official now, we are close to the twilight zone: r10c2 boots and works ok here with ACPI enabled on a P4+ICH5+e100: DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000feb90 ACPI: RSDT (v001 DELL 170L 0x00000007 ASL 0x00000061) @ 0x000fd1ea ACPI: FADT (v001 DELL 170L 0x00000007 ASL 0x00000061) @ 0x000fd21e ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd19c9 ACPI: MADT (v001 DELL 170L 0x00000007 ASL 0x00000061) @ 0x000fd292 ACPI: BOOT (v001 DELL 170L 0x00000007 ASL 0x00000061) @ 0x000fd2fe ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000) Built 1 zonelists Kernel command line: ro root=/dev/hda2 console=tty0 console=ttyS0,115200n8 nmi_w atchdog=2 __iounmap: bad address c00fffd9 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Adeos 2.6r10c2/x86: Root domain Linux registered. PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2793.640 MHz processor. > : > > Rus > > _______________________________________________ > RTAI mailing list > RTAI@rtai.org > https://mail.rtai.org/cgi-bin/mailman/listinfo/rtai -- Philippe.