From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Marcos_Lois_Berm=FAdez?= Date: Mon, 11 Apr 2005 17:55:31 +0200 Subject: [U-Boot-Users] using u-bbot with new platform Message-ID: <425A9DF3.4080504@teaxul.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello. I'm a newbye in u-boot, i will use it in a hardware platform based in PXA255, iwill try to get ready the basic stuff, flash, RAM, uart, i will base it on any PXA255 board that already supported by u-boot. My problem is that my hardware don't have a ethernet card, and it will be very usefull in the development process, i have a pcmcia card that is a tunlip_cs linux driver i think porting it, but i not have idea of what kind of considerations i need to taek in mind for pcmcia based card. If there anybody that try this, or another pcmcia card that have better support in u-boot, please help me. Regards. -- ------------------------------------------------- Marcos Lois Berm?dez Departamento I+D+i Tecnicas Electronicas Aplicadas Xulio S.A. Email: marcos.lois at teaxul.com Telefono: +34 986 462 026 Fax: +34 986 460 816 Direccion: Ctra. de Bayona, 283 - Aptdo. 8.110 C.P. 36330 Vigo - Pontevedra ------------------------------------------------