From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Marcos_Lois_Berm=FAdez?= Date: Mon, 11 Apr 2005 18:55:36 +0200 Subject: [U-Boot-Users] using u-bbot with new platform In-Reply-To: References: <425A9DF3.4080504@teaxul.com> Message-ID: <425AAC08.2070905@teaxul.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Cliff Brake wrote: >On Apr 11, 2005 11:55 AM, Marcos Lois Berm?dez wrote: > > >>Hello. >> >>I'm a newbye in u-boot, i will use it in a hardware platform based in >>PXA255, iwill try to get ready the basic stuff, flash, RAM, uart, i will >>base it on any PXA255 board that already supported by u-boot. >> >>My problem is that my hardware don't have a ethernet card, and it will >>be very usefull in the development process, i have a pcmcia card that is >>a tunlip_cs linux driver i think porting it, but i not have idea of what >>kind of considerations i need to taek in mind for pcmcia based card. If >>there anybody that try this, or another pcmcia card that have better >>support in u-boot, please help me. >> >> > >I don't have any answers on the PCMCIA issue, but one other option >that may be useful is to load images from a MMC card. A MMC interface >is very easy to get working (3 wires). > > I don't have mmc interface in the current platform. at this moment i will try go get basic system working, FLASH, RAM, UART, when it's done i will comming back to share my work on PCMCIA. Regards, and a lot of thks. >See: > >http://bec-systems.com/collab/index.php/Uboot_Notes#To_load_U-boot_image_from_a_MMC_card > >Cliff > > > -- ------------------------------------------------- Marcos Lois Berm?dez Departamento I+D+i Tecnicas Electronicas Aplicadas Xulio S.A. Email: marcos.lois at teaxul.com Telefono: +34 986 462 026 Fax: +34 986 460 816 Direccion: Ctra. de Bayona, 283 - Aptdo. 8.110 C.P. 36330 Vigo - Pontevedra ------------------------------------------------