From: James Pearson <james-p@moving-picture.com>
To: linux-kernel@vger.kernel.org
Subject: Kernel BUG in khubd with 2.4.30 x86_64
Date: Mon, 18 Apr 2005 13:20:07 +0100 [thread overview]
Message-ID: <4263A5F7.9030105@moving-picture.com> (raw)
I'm using a Dell PowerEdge 2850 with dual 3.6Ghz Xeon EM64T CPUs.
Using a vanilla 2.4.30 SMP x86_64 kernel, when I try to modprobe
usb-uhci I get:
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
dmesg and ksymoops output below.
Thanks
James Pearson
dmesg:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:44:32 Apr 17 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x9ce0, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x9cc0, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x9ca0, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.0-1, assigned address 2
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
[<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
[<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
[<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
[<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
RIP [<ffffffff80121ae4>] RSP <000001023c3ddcd8>
ksymoops:
ksymoops 2.4.11 on x86_64 2.4.30. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.30/ (default)
-m /boot/System.map-2.4.30 (specified)
Error (expand_objects): cannot stat(/lib/xfs.o) for xfs
Error (expand_objects): cannot stat(/lib/raid1.o) for raid1
Error (expand_objects): cannot stat(/lib/mptscsih.o) for mptscsih
Error (expand_objects): cannot stat(/lib/mptbase.o) for mptbase
Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod
Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod
SGI XFS with no debug enabled
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
kernel BUG in header file at line 160
Kernel BUG at panic:149
invalid operand: 0000
CPU 1
Pid: 1380, comm: khubd Not tainted
RIP: 0010:[<ffffffff80121ae4>]
Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64
RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016
RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000
RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000
RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0
Process khubd (pid: 1380, stackpage=1023c3dd000)
Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400
ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200
00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68
Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>]
[<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>]
[<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>]
[<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>]
[<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
>>RIP; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
>>RSI; ffffffff803e4000 <init_task_union+0/2000>
Trace; ffffffff80121ae4 <__out_of_line_bug+14/30>
Trace; ffffffffa013b8c4 <[usb-uhci]uhci_submit_urb+284/410>
Trace; ffffffffa012443a <[usbcore]usb_submit_urb+2a/40>
Trace; ffffffffa012455c <[usbcore]usb_start_wait_urb+ac/1b0>
Trace; ffffffffa01246e3 <[usbcore]usb_internal_control_msg+83/c0>
Trace; ffffffffa012479d <[usbcore]usb_control_msg+7d/a0>
Trace; ffffffffa0125486 <[usbcore]usb_set_address+46/50>
Trace; ffffffffa012602f <[usbcore]usb_new_device+1f/1a0>
Trace; ffffffffa0127c1a <[usbcore]usb_hub_port_connect_change+1ea/240>
Trace; ffffffffa0127dbf <[usbcore]usb_hub_events+14f/2d0>
Trace; ffffffffa0127f95 <[usbcore]usb_hub_thread+55/140>
Trace; ffffffff80110888 <child_rip+8/10>
Trace; ffffffffa0127f40 <[usbcore]usb_hub_thread+0/140>
Trace; ffffffff80110880 <child_rip+0/10>
Code; ffffffff80121ae4 <__out_of_line_bug+14/30>
0000000000000000 <_RIP>:
Code; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
0: 0f 0b ud2a <=====
Code; ffffffff80121ae6 <__out_of_line_bug+16/30>
2: 02 79 29 add 0x29(%rcx),%bh
Code; ffffffff80121ae9 <__out_of_line_bug+19/30>
5: 80 ff ff cmp $0xff,%bh
Code; ffffffff80121aec <__out_of_line_bug+1c/30>
8: ff (bad)
Code; ffffffff80121aed <__out_of_line_bug+1d/30>
9: ff 95 00 eb fe 90 callq *0xffffffff90feeb00(%rbp)
Code; ffffffff80121af3 <__out_of_line_bug+23/30>
f: 90 nop
Code; ffffffff80121af4 <__out_of_line_bug+24/30>
10: 90 nop
Code; ffffffff80121af5 <__out_of_line_bug+25/30>
11: 90 nop
Code; ffffffff80121af6 <__out_of_line_bug+26/30>
12: 90 nop
Code; ffffffff80121af7 <__out_of_line_bug+27/30>
13: 90 nop
6 errors issued. Results may not be reliable.
next reply other threads:[~2005-04-18 12:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-18 12:20 James Pearson [this message]
2005-04-19 12:50 ` Kernel BUG in khubd with 2.4.30 x86_64 James Pearson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4263A5F7.9030105@moving-picture.com \
--to=james-p@moving-picture.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.