Re: [Bluez-users] Apple BT Keyboard and Ubuntu Linux

[Andre Baron <andre@metalan.net>]

[-- Attachment #1: Type: text/plain, Size: 2941 bytes --]

Marcel Holtmann wrote:

>Hi Andre,
>
>  
>
>>hcidump -X -V gave me an error message that -V was an invalid option. 
>>However I ran it without that option and here's the output.
>>    
>>
>
>install the latest version, because I am not going to decode the HCI
>parts by myself anytime again.
>
>Regards
>
>Marcel
>  
>
Understood, I made sure I grabbed the latest libs and utils as well.
hcidump:

lampshade:/# hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.19
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Write Authentication Enable (0x03|0x0020) plen 1
  0000: 01                                                .
 > HCI Event: Command Complete (0x0e) plen 4
    Write Authentication Enable (0x03|0x0020) ncmd 1
    0000: 00                                                .
< HCI Command: Inquiry (0x01|0x0001) plen 5
    lap 0x9e8b33 len 8 num 0
 > HCI Event: Command Status (0x0f) plen 4
    Inquiry (0x01|0x0001) status 0x00 ncmd 1
 > HCI Event: Inquiry Result (0x02) plen 15
    bdaddr 00:0A:95:3E:CC:74 mode 1 clkoffset 0x705c class 0x002540
 > HCI Event: Inquiry Complete (0x01) plen 1
    status 0x00
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0A:95:3E:CC:74 ptype 0xcc18 rswitch 0x01 clkoffset 0x705c 
(valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:0A:95:3E:CC:74
 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0A:95:3E:CC:74
 > HCI Event: Connect Complete (0x03) plen 11
    status 0x10 handle 41 bdaddr 00:0A:95:3E:CC:74 type ACL encrypt 0x00
    Error: Connection Accept Timeout Exceeded
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:0A:95:3E:CC:74 ptype 0xcc18 rswitch 0x01 clkoffset 0x705c 
(valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:0A:95:3E:CC:74
 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:0A:95:3E:CC:74
 > HCI Event: Connect Complete (0x03) plen 11
    status 0x10 handle 42 bdaddr 00:0A:95:3E:CC:74 type ACL encrypt 0x00
    Error: Connection Accept Timeout Exceeded

Commands:
lampshade:/etc/network# hciconfig hic0 auth
lampshade:/etc/network# hidd --conn 00:0A:95:3E:CC:74
Can't create HID control channel: Host is down
lampshade:/etc/network# hciconfig hic0 auth
You have new mail in /var/mail/andre
lampshade:/etc/network# hidd --search
Searching ...
        Connecting to device 00:0A:95:3E:CC:74
Can't create HID control channel: Connection timed out
lampshade:/etc/network# hidd --conn 00:0A:95:3E:CC:74
Can't create HID control channel: Connection timed out
lampshade:/etc/network#

Andre
(Hmm... should watch StarTrek TNG while composing emails, thier speach 
infultrates the email)

[-- Attachment #2: Type: text/html, Size: 4430 bytes --]