From mboxrd@z Thu Jan 1 00:00:00 1970 From: Earle Nietzel Subject: Re: IO_APIC Date: Mon, 25 Apr 2005 21:30:21 -0400 Message-ID: <426D99AD.3060305@rhinobox.org> References: <2960974E1401A54CAA7D33622D115F1A01795B4E@exc01.ilsos.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <2960974E1401A54CAA7D33622D115F1A01795B4E@exc01.ilsos.net> Sender: linux-smp-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-smp@vger.kernel.org Kline, Larry wrote: >Yes - I have tried to look at any changes, additions/deletions upgrades, that may have occurred and I cannot find anything on this system. I even looked at the kde and qt members from the original Suse 8.0 cd just to be sure I was running the original software. Everything matches. I have a CTX CPG1772E 17" monitor on this system and I have modified XF86Config to match the suggested configuration from the floppy that came with the Monitor. I try to run sax2 in level 3, init 3, and the system says that "Signal out of range 79.8 Khz 74.9 Hz. I modified the XF86Config file to match the monitor specifications that came with the monitor. No help. > > > It seems like an X configuration problem especially if you can't get sax to configure X correctly. I would suggest loading the default /etc/X11/XF86Config file from the X rpm and then give sax a go again. regards, Earle