From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-15?Q?Bernd_M=FCller?= Subject: 5.1 and 2.1 output at same time Date: Tue, 26 Apr 2005 18:40:27 +0200 Message-ID: <426E6EFB.5020909@gmx.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Return-path: Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hello; Is it possible to get out 5.1 and stereo sound at the same. I'm using in my mediacenter computer (MythTV) an Audigy 2 soundcard connected to Creative Inspire speaker set. This works fine for me. But i would like also to use an channel modulator to feed image and sound signals from my computer into the cable network at home. The problem is, that i need stereo output from my soundcard to feed the modulator. My question is now, howto get 5.1 and stereo output at the same time. Maybe not possible with one soundcard i thougt about using two soundcards and cloning signal from the 5.1 card to the stereo card. But i've read there should be soundsync problems. Any suggestions? ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix