From: "Jérôme Petazzoni" <jp@enix.org>
To: xen-devel@lists.xensource.com
Cc: christopher.w.clark@gmail.com
Subject: Re: xen+drbd (partial?) success story
Date: Thu, 28 Apr 2005 19:06:19 +0200 [thread overview]
Message-ID: <4271180B.2010300@enix.org> (raw)
In-Reply-To: <eab08754050428100451c0451f@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 180 bytes --]
>Are you sure you attached the error message log? I'm interested in
>seeing what dom0 is complaining about. Could you send me a copy?
>
>
I hope it will get thru this time ...
[-- Attachment #2: xen-drbd-dmesg.log --]
[-- Type: text/plain, Size: 8148 bytes --]
Badness in blk_plug_device at drivers/block/ll_rw_blk.c:1217
[<c02270d0>] blk_plug_device+0x80/0x90
[<c7101a27>] drbd_make_request_common+0x727/0x8f0 [drbd]
[<c0227314>] blk_run_queue+0x34/0x80
[<c027ccfd>] netif_rx+0x9d/0x1f0
[<c708085f>] br_pass_frame_up_finish+0xf/0x20 [bridge]
[<c0288561>] nf_hook_slow+0xf1/0x130
[<c7080850>] br_pass_frame_up_finish+0x0/0x20 [bridge]
[<c7101cd6>] drbd_make_request_26+0xe6/0x29d [drbd]
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0228f4d>] generic_make_request+0x17d/0x220
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c013a5b3>] mempool_alloc+0x73/0x1b0
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0229052>] submit_bio+0x62/0x100
[<c015d414>] bio_add_page+0x34/0x40
[<c02445cd>] dispatch_rw_block_io+0x39d/0x450
[<c011aa72>] __call_console_drivers+0x62/0x70
[<c011ab70>] call_console_drivers+0x60/0x120
[<c01f1466>] vsnprintf+0x256/0x4d0
[<c011afb7>] release_console_sem+0x67/0x120
[<c011ae4e>] vprintk+0x12e/0x1b0
[<c011ad17>] printk+0x17/0x20
[<c0134f07>] __print_symbol+0x87/0xe0
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c0255ac8>] ata_check_status+0x28/0x30
[<c0255616>] ata_tf_load_pio+0x126/0x1b0
[<c0255ac8>] ata_check_status+0x28/0x30
[<c01f2132>] __delay+0x12/0x20
[<c0258b03>] ata_bmdma_setup_pio+0x43/0x60
[<c0258a08>] ata_qc_issue_prot+0x108/0x150
[<c02588c1>] ata_qc_issue+0x61/0xa0
[<c025a890>] ata_scsi_translate+0xe0/0x130
[<c024b0b0>] scsi_done+0x0/0x30
[<c025a570>] ata_scsi_rw_xlat+0x0/0x1f0
[<c024b0b0>] scsi_done+0x0/0x30
[<c024b0b0>] scsi_done+0x0/0x30
[<c025b35b>] ata_scsi_queuecmd+0x5b/0x120
[<c0107c2a>] __switch_to+0x2a/0x380
[<c0224d1b>] elv_next_request+0x1b/0x100
[<c01e7ff0>] .text.lock.shm+0xc/0x11c
[<c0224d50>] elv_next_request+0x50/0x100
[<c022718e>] __generic_unplug_device+0x3e/0x40
[<c02271b7>] generic_unplug_device+0x27/0x60
[<c0116448>] recalc_task_prio+0x88/0x150
[<c02eebc9>] schedule+0x2e9/0x520
[<c0244131>] do_block_io_op+0x111/0x120
[<c0243df7>] blkio_schedule+0x127/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
Badness in blk_remove_plug at drivers/block/ll_rw_blk.c:1238
[<c022714e>] blk_remove_plug+0x6e/0x70
[<c71077b2>] drbd_unplug_fn+0x22/0x220 [drbd]
[<c0243dd6>] blkio_schedule+0x106/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
Badness in blk_plug_device at drivers/block/ll_rw_blk.c:1217
[<c02270d0>] blk_plug_device+0x80/0x90
[<c7101a27>] drbd_make_request_common+0x727/0x8f0 [drbd]
[<c0227314>] blk_run_queue+0x34/0x80
[<c027ccfd>] netif_rx+0x9d/0x1f0
[<c708085f>] br_pass_frame_up_finish+0xf/0x20 [bridge]
[<c0288561>] nf_hook_slow+0xf1/0x130
[<c7080850>] br_pass_frame_up_finish+0x0/0x20 [bridge]
[<c7101cd6>] drbd_make_request_26+0xe6/0x29d [drbd]
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0228f4d>] generic_make_request+0x17d/0x220
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c013a5b3>] mempool_alloc+0x73/0x1b0
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0229052>] submit_bio+0x62/0x100
[<c015d414>] bio_add_page+0x34/0x40
[<c02445cd>] dispatch_rw_block_io+0x39d/0x450
[<c011aa72>] __call_console_drivers+0x62/0x70
[<c011ab70>] call_console_drivers+0x60/0x120
[<c01f1466>] vsnprintf+0x256/0x4d0
[<c011afb7>] release_console_sem+0x67/0x120
[<c011ae4e>] vprintk+0x12e/0x1b0
[<c011ad17>] printk+0x17/0x20
[<c0134f07>] __print_symbol+0x87/0xe0
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c0255ac8>] ata_check_status+0x28/0x30
[<c0255616>] ata_tf_load_pio+0x126/0x1b0
[<c0255ac8>] ata_check_status+0x28/0x30
[<c01f2132>] __delay+0x12/0x20
[<c0258b03>] ata_bmdma_setup_pio+0x43/0x60
[<c0258a08>] ata_qc_issue_prot+0x108/0x150
[<c02588c1>] ata_qc_issue+0x61/0xa0
[<c025a890>] ata_scsi_translate+0xe0/0x130
[<c024b0b0>] scsi_done+0x0/0x30
[<c025a570>] ata_scsi_rw_xlat+0x0/0x1f0
[<c024b0b0>] scsi_done+0x0/0x30
[<c024b0b0>] scsi_done+0x0/0x30
[<c025b35b>] ata_scsi_queuecmd+0x5b/0x120
[<c0107c2a>] __switch_to+0x2a/0x380
[<c0224d1b>] elv_next_request+0x1b/0x100
[<c01e7ff0>] .text.lock.shm+0xc/0x11c
[<c0224d50>] elv_next_request+0x50/0x100
[<c022718e>] __generic_unplug_device+0x3e/0x40
[<c02271b7>] generic_unplug_device+0x27/0x60
[<c0116448>] recalc_task_prio+0x88/0x150
[<c02eebc9>] schedule+0x2e9/0x520
[<c0244131>] do_block_io_op+0x111/0x120
[<c0243df7>] blkio_schedule+0x127/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
Badness in blk_remove_plug at drivers/block/ll_rw_blk.c:1238
[<c022714e>] blk_remove_plug+0x6e/0x70
[<c71077b2>] drbd_unplug_fn+0x22/0x220 [drbd]
[<c0243dd6>] blkio_schedule+0x106/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
Badness in blk_plug_device at drivers/block/ll_rw_blk.c:1217
[<c02270d0>] blk_plug_device+0x80/0x90
[<c7101a27>] drbd_make_request_common+0x727/0x8f0 [drbd]
[<c0227314>] blk_run_queue+0x34/0x80
[<c027ccfd>] netif_rx+0x9d/0x1f0
[<c708085f>] br_pass_frame_up_finish+0xf/0x20 [bridge]
[<c0288561>] nf_hook_slow+0xf1/0x130
[<c7080850>] br_pass_frame_up_finish+0x0/0x20 [bridge]
[<c7101cd6>] drbd_make_request_26+0xe6/0x29d [drbd]
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0228f4d>] generic_make_request+0x17d/0x220
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c013a5b3>] mempool_alloc+0x73/0x1b0
[<c012fd70>] autoremove_wake_function+0x0/0x60
[<c0229052>] submit_bio+0x62/0x100
[<c015d414>] bio_add_page+0x34/0x40
[<c02445cd>] dispatch_rw_block_io+0x39d/0x450
[<c011aa72>] __call_console_drivers+0x62/0x70
[<c011ab70>] call_console_drivers+0x60/0x120
[<c01f1466>] vsnprintf+0x256/0x4d0
[<c011afb7>] release_console_sem+0x67/0x120
[<c011ae4e>] vprintk+0x12e/0x1b0
[<c011ad17>] printk+0x17/0x20
[<c0134f07>] __print_symbol+0x87/0xe0
[<c0296e30>] ip_rcv_finish+0x0/0x280
[<c0255ac8>] ata_check_status+0x28/0x30
[<c0255616>] ata_tf_load_pio+0x126/0x1b0
[<c0255ac8>] ata_check_status+0x28/0x30
[<c01f2132>] __delay+0x12/0x20
[<c0258b03>] ata_bmdma_setup_pio+0x43/0x60
[<c0258a08>] ata_qc_issue_prot+0x108/0x150
[<c02588c1>] ata_qc_issue+0x61/0xa0
[<c025a890>] ata_scsi_translate+0xe0/0x130
[<c024b0b0>] scsi_done+0x0/0x30
[<c025a570>] ata_scsi_rw_xlat+0x0/0x1f0
[<c024b0b0>] scsi_done+0x0/0x30
[<c024b0b0>] scsi_done+0x0/0x30
[<c025b35b>] ata_scsi_queuecmd+0x5b/0x120
[<c0107c2a>] __switch_to+0x2a/0x380
[<c0224d1b>] elv_next_request+0x1b/0x100
[<c01e7ff0>] .text.lock.shm+0xc/0x11c
[<c0224d50>] elv_next_request+0x50/0x100
[<c022718e>] __generic_unplug_device+0x3e/0x40
[<c02271b7>] generic_unplug_device+0x27/0x60
[<c0116448>] recalc_task_prio+0x88/0x150
[<c02eebc9>] schedule+0x2e9/0x520
[<c0244131>] do_block_io_op+0x111/0x120
[<c0243df7>] blkio_schedule+0x127/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
Badness in blk_remove_plug at drivers/block/ll_rw_blk.c:1238
[<c022714e>] blk_remove_plug+0x6e/0x70
[<c71077b2>] drbd_unplug_fn+0x22/0x220 [drbd]
[<c0243dd6>] blkio_schedule+0x106/0x180
[<c01170d0>] default_wake_function+0x0/0x20
[<c01094b2>] ret_from_fork+0x6/0x1c
[<c01170d0>] default_wake_function+0x0/0x20
[<c0243cd0>] blkio_schedule+0x0/0x180
[<c0107525>] kernel_thread_helper+0x5/0x10
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2005-04-28 17:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-28 15:51 xen+drbd (partial?) success story Jérôme Petazzoni
[not found] ` <eab08754050428100451c0451f@mail.gmail.com>
2005-04-28 17:06 ` Jérôme Petazzoni [this message]
2005-04-28 17:10 ` James Bulpin
2005-04-28 17:23 ` Jérôme Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4271180B.2010300@enix.org \
--to=jp@enix.org \
--cc=christopher.w.clark@gmail.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.