From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ed Wildgoose <lists@wildgooses.com>
Date: Sat, 30 Apr 2005 10:51:41 +0000
Subject: Re: [LARTC] Bridging three vlans
Message-Id: <4273633D.1000307@wildgooses.com>
List-Id: <lartc.vger.kernel.org>
References: <42735BD6.3030708@wildgooses.com>
In-Reply-To: <42735BD6.3030708@wildgooses.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Ed Wildgoose wrote:

> OK, strange request but I want to bridge three vlans under linux 2.4.  
> Bridging works fine with two vlans, but is failing to route when I add 
> the third vlan.

...

> Is this a linux 2.4 limitation or user error?  Grateful for any advice


Hmm, OK I know I haven't given much info, but first off is this scenario 
actually possible?  A bit of digging in the bridging howto suggests that 
it is.

Also I just noticed that STP is off in my setup.  Is this going to be 
mandatory when we add three vlans into a bridge? 

Thanks for any tips on actually debugging whats happening here

Ta

Ed W
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc