From: Ole Andreas Torvmark <ole.torvmark@radionor.no>
To: linuxppc-embedded@ozlabs.org
Subject: Ethernet bridging on MPC8248
Date: Mon, 02 May 2005 11:28:27 +0200 [thread overview]
Message-ID: <4275F2BB.9050100@radionor.no> (raw)
Hi !
I've a custom board with a MPC8248 with two LXT972 10/100MBit ethernet phys.
The board is running 2.6.9-rc1, and I'm using the FCC ENET Version 0.3
driver with some modifications.
My question is :
I've tried to get ethernet briding between the two ethernet ports to work.
I've set up the following :
ifconfig eth0 0.0.0.0
ifconfig eth1 0.0.0.0
brctl addbr br0
brctl addif br0 eth0
brctl addif br0 eth1
ifconfig br0 192.168.0.222 netmask 255.255.255.0
If I connect a machine to port 0 (eth0) then I can ping the bridge from
that machine,
If I connect a machine to port 1 (eth1) I cannot ping the bridge.
If I connect machines to both ports, I cannot ping one machine from the
other, the only thing i can successfully ping is from port 0 to bridge
and from bridge to port 0
Is this a known problem with the FCC ENET driver or does it support
bridging fully ?
best regards
Ole Andreas Torvmark
R & D Engineer
Radionor Communications AS
next reply other threads:[~2005-05-02 9:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-02 9:28 Ole Andreas Torvmark [this message]
2005-05-03 6:15 ` Ethernet bridging on MPC8248 jbi130
-- strict thread matches above, loose matches on Subject: below --
2005-05-03 6:24 Bastos Fernandez Alexandre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4275F2BB.9050100@radionor.no \
--to=ole.torvmark@radionor.no \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.