Re: [RFC][PATCH 2.6.12-rc2 1/3] FCC Ethernet PlatformDevice support for 82xx

[Vitaly Bordug <vbordug@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 2157 bytes --]

Eugene Surovegin wrote:

>On Wed, May 04, 2005 at 06:35:16PM +0400, Vitaly Bordug wrote:
>  
>
>>This patch adds generic PlatformDevice support to the 82xx family.
>>Only FCC's exist currently in the structure, as there is the driver 
>>which will utilize this.
>>
>>    
>>
>
>[snip]
>
>  
>
>>+#ifdef CONFIG_CPM2
>>+	identify_ppc_sys_by_id(cpm2_immr->im_memctl.memc_immr << 16);
>>+
>>+	/* Set up the MAC addresses for the FECs
>>+	 */
>>+	fec = ppc_sys_platform_devices[MPC82xx_FCC1].dev.platform_data;
>>+	memcpy(fec->mac_addr,bi->bi_enetaddr,6);
>>+
>>+	fec = ppc_sys_platform_devices[MPC82xx_FCC2].dev.platform_data;
>>+#ifdef CONFIG_ADS8272
>>+	memcpy(fec->mac_addr,bi->bi_enet1addr,6);
>>+#else
>>+	memcpy(fec->mac_addr,bi->bi_enetaddr,6);
>>+	fec->macaddr[5] ^= 1;
>>+#endif
>>+#endif
>>    
>>
>
>What is this? Why does common file contain board specific ifdefs????
>
>[snip]
>
>  
>
>>+/* FCC1 Clock Source Configuration.  There are board specific.
>>+   Can only choose from CLK9-12 */
>>+#if defined(CONFIG_ADS8272)
>>+#define F1_RXCLK	11
>>+#define F1_TXCLK	10
>>+#else
>>+#define F1_RXCLK	12
>>+#define F1_TXCLK	11
>>+#endif
>>    
>>
>
>Same thing. Why on earth you continue current 8xxx trend of putting 
>board specific crap into common files?
>
>  
>
>>+
>>+/* FCC2 Clock Source Configuration.  There are board specific.
>>+   Can only choose from CLK13-16 */
>>+#ifdef CONFIG_ADS8272
>>+#define F2_RXCLK	15
>>+#define F2_TXCLK	16
>>+#else
>>+#define F2_RXCLK	13
>>+#define F2_TXCLK	14
>>+#endif
>>    
>>
>
>Ditto.
>
>  
>
>>+#ifdef CONFIG_ADS8272
>>+#define PC_MDIO		0x00002000U
>>+#define PC_MDCK		0x00001000U
>>+#else
>>+#define PC_MDIO		0x00000004U
>>+#define PC_MDCK		0x00000020U
>>+#endif
>>    
>>
>
>Ditto.
>
>  
>
>>+				.name	= "phyinterrupt",
>>+				.start	= SIU_INT_IRQ5,
>>+				.end	= SIU_INT_IRQ5,
>>+				.flags	= IORESOURCE_IRQ,
>>+			},
>>    
>>
>
>Why is this here? PHY interrupt routing is _board_ specific.
>
>  
>
I have fixed these yet, but I think it will be more reasonable to update 
this together with respective driver which I'll work on together with 
Pantelis.
Thank you for review.

-- 
Sincerely, 
Vitaly


[-- Attachment #2: Type: text/html, Size: 2974 bytes --]