From: Matthias-Christian Ott <matthias.christian@tiscali.de>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Usb-Storage OOPS
Date: Sun, 08 May 2005 15:17:33 +0200 [thread overview]
Message-ID: <427E116D.4080709@tiscali.de> (raw)
I got this when plugging out and plugging in my digicam.
Matthias-Christian Ott
--
usb 2-1: new full speed USB device using uhci_hcd and address 3
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 2-1: reset full speed USB device using uhci_hcd and address 3
Vendor: Digital Model: Camera Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 124160 512-byte hdwr sectors (64 MB)
sda: Write Protect is off
sda: Mode Sense: 00 06 00 00
sda: assuming drive cache: write through
SCSI device sda: 124160 512-byte hdwr sectors (64 MB)
sda: Write Protect is off
sda: Mode Sense: 00 06 00 00
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
usb 2-1: USB disconnect, address 3
usb 2-1: new full speed USB device using uhci_hcd and address 4
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 2-1: USB disconnect, address 4
scsi: Device offlined - not ready after error recovery: host 2 channel 0
id 0 lun 0
usb-storage: device scan complete
Unable to handle kernel NULL pointer dereference at virtual address 00000050
printing eip:
c019b4ef
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: nls_cp437 vfat fat usb_storage ipt_state iptable_filter
ip_tables ohci_hcd ehci_hcd snd_cs4231_lib snd_mpu401 analog ns558
parport_pc parport pcspkr eth1394 snd_cmipci gameport snd_opl3_lib
snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device ohci1394 ieee1394
nvidia i2c_i801 i2c_core usbhid uhci_hcd pci_hotplug tsdev evdev
p4_clockmod speedstep_lib freq_table ip_conntrack_ftp ip_conntrack
snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore
ndiswrapper 8139too mii usbserial usbcore rtc
CPU: 0
EIP: 0060:[<c019b4ef>] Tainted: P VLI
EFLAGS: 00010292 (2.6.12-rc3-mm2-ott)
EIP is at sysfs_hash_and_remove+0xb/0x10d
eax: 00000000 ebx: d5a482d0 ecx: 00000003 edx: c05bf63c
esi: d5a482c8 edi: d5a48198 ebp: c05bf5c0 esp: d6afde08
ds: 007b es: 007b ss: 0068
Process khubd (pid: 1229, threadinfo=d6afc000 task=d7386030)
Stack: 00000003 00000001 00000000 d5a482d0 d5a482c8 d5a48198 c05bf5c0 c039064a
00000000 c0524989 c05bf63c d5a482c8 c144e3f8 c144e438 cc1bc800
c03906bb
d5a482c8 d5a48000 c03dc06c d5a482c8 00000003 d5a48000 c144e3f8
c144e400
Call Trace:
[<c039064a>] class_device_del+0x83/0xe4
[<c03906bb>] class_device_unregister+0x10/0x1d
[<c03dc06c>] scsi_remove_device+0x4b/0x94
[<c03dc138>] __scsi_remove_target+0x83/0xbf
[<c03db217>] scsi_forget_host+0x3f/0x67
[<c03d44c6>] scsi_remove_host+0x11/0x64
[<c04d1143>] __down_failed+0x7/0xc
[<d9432a24>] storage_disconnect+0x5c/0x7a [usb_storage]
[<d91870b4>] usb_unbind_interface+0x41/0x7d [usbcore]
[<c038f915>] device_release_driver+0x75/0x91
[<c038f1f0>] bus_remove_device+0x6a/0x82
[<c038e62d>] device_del+0x31/0x6c
[<d918f1be>] usb_disable_device+0xa7/0x11d [usbcore]
[<d91893eb>] usb_disconnect+0xaa/0x13d [usbcore]
[<d918ac6c>] hub_port_connect_change+0x57/0x422 [usbcore]
[<d91880e7>] clear_port_feature+0x57/0x5b [usbcore]
[<d918b339>] hub_events+0x302/0x48b [usbcore]
[<d918b511>] hub_thread+0x4f/0x116 [usbcore]
[<c0134302>] autoremove_wake_function+0x0/0x4b
[<d918b4c2>] hub_thread+0x0/0x116 [usbcore]
[<c0101151>] kernel_thread_helper+0x5/0xb
Code: 7d 33 00 89 5c 24 18 8b 47 10 89 44 24 14 83 c4 04 5b 5e 5f e9 d7 52
fe ff 83 c4 04 5b 5e 5f c3 55 57 56 53 83 ec 0c 8b 44 24 20 <8b> 50 50 8b
48 10 f0 ff 49 78 0f 88 f2 00 00 00 8b 42 0c 8d 68
reply other threads:[~2005-05-08 13:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=427E116D.4080709@tiscali.de \
--to=matthias.christian@tiscali.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.