From: Alan Lake <alan.lake@lakeinfoworks.com>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: Mouse pad doesn't work
Date: Mon, 09 May 2005 19:22:38 -0700 [thread overview]
Message-ID: <42801AEE.5080308@lakeinfoworks.com> (raw)
The following comes from
www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html
[1.] One line summary of the problem:
Tapping on the mouse pad of my laptop does not work.
[2.] Full description of the problem/report:
Clicking on the keys of my mouse pad works OK.
Tapping on the mouse pad does not work.
[3.] Keywords (i.e., modules, networking, kernel):
Mouse
[4.] Kernel version (from /proc/version):
Linux version 2.6.11-1.14_FC3 (bhcompile@bugs.build.redhat.com) (gcc version 3.4.3 20050227 (Red Hat 3.4.3-22)) #1 Thu Apr 7 19:23:49 EDT 2005
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
n/a
[6.] A small shell script or example program which triggers the
problem (if possible)
not possible
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux ontario.lakeinfoworks.com 2.6.11-1.14_FC3 #1 Thu Apr 7 19:23:49 EDT 2005 i686 i686 i386 GNU/Linux
Gnu C 3.4.3
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12a
mount 2.12a
module-init-tools 3.1-pre5
e2fsprogs 1.36
jfsutils 1.1.7
reiserfsprogs 3.6.18
reiser4progs line
xfsprogs 2.6.13
pcmcia-cs 3.2.7
quota-tools 3.12.
PPP 2.4.2
isdn4k-utils 3.3
nfs-utils 1.0.6
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 039
Modules Loaded ppp_deflate zlib_deflate ppp_async crc_ccitt
ppp_generic slhc parport_pc lp parport autofs4 sunrpc serial_cs pcmcia
iptable_nat iptable_mangle ipt_REJECT ipt_state ip_conntrack ipt_LOG
iptable_filter ip_tables md5 ipv6 cdc_acm visor usbserial yenta_socket
rsrc_nonstatic pcmcia_core uhci_hcd i2c_piix4 i2c_core snd_es1968
snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd
soundcore floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 801.909
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1585.15
[7.3.] Module information (from /proc/modules):
ppp_deflate 5953 0 - Live 0xd8a7e000
zlib_deflate 21721 1 ppp_deflate, Live 0xd8abd000
ppp_async 13249 1 - Live 0xd8a84000
crc_ccitt 2113 1 ppp_async, Live 0xd8989000
ppp_generic 39509 6 ppp_deflate,ppp_async, Live 0xd8a60000
slhc 7105 1 ppp_generic, Live 0xd8a5d000
parport_pc 28421 1 - Live 0xd8a76000
lp 12489 0 - Live 0xd89a5000
parport 40201 2 parport_pc,lp, Live 0xd8a6b000
autofs4 26181 0 - Live 0xd89b3000
sunrpc 164485 1 - Live 0xd8a8c000
serial_cs 9033 1 - Live 0xd89a1000
pcmcia 26465 5 serial_cs, Live 0xd89ab000
iptable_nat 21661 0 - Live 0xd899a000
iptable_mangle 2753 0 - Live 0xd8900000
ipt_REJECT 7105 1 - Live 0xd8978000
ipt_state 1857 3 - Live 0xd894c000
ip_conntrack 40601 2 iptable_nat,ipt_state, Live 0xd898f000
ipt_LOG 7489 4 - Live 0xd895c000
iptable_filter 2881 1 - Live 0xd885f000
ip_tables 19777 6 iptable_nat,iptable_mangle,ipt_REJECT,ipt_state,ipt_LOG,iptable_filter, Live 0xd897c000
md5 4161 1 - Live 0xd8947000
ipv6 259201 14 - Live 0xd89bb000
cdc_acm 13409 0 - Live 0xd8969000
visor 19661 0 - Live 0xd8956000
usbserial 28713 1 visor, Live 0xd8960000
yenta_socket 21065 3 - Live 0xd894f000
rsrc_nonstatic 10433 1 yenta_socket, Live 0xd88fc000
pcmcia_core 47993 4 serial_cs,pcmcia,yenta_socket,rsrc_nonstatic, Live 0xd88e4000
uhci_hcd 33497 0 - Live 0xd893d000
i2c_piix4 8657 0 - Live 0xd88d4000
i2c_core 21953 1 i2c_piix4, Live 0xd88a5000
snd_es1968 40385 2 - Live 0xd88f1000
snd_ac97_codec 71097 1 snd_es1968, Live 0xd892a000
snd_pcm_oss 51953 0 - Live 0xd891c000
snd_mixer_oss 18241 2 snd_pcm_oss, Live 0xd88ce000
snd_pcm 99657 3 snd_es1968,snd_ac97_codec,snd_pcm_oss, Live 0xd8902000
snd_timer 33093 1 snd_pcm, Live 0xd88da000
snd_page_alloc 9669 2 snd_es1968,snd_pcm, Live 0xd886a000
gameport 5057 1 snd_es1968, Live 0xd885c000
snd_mpu401_uart 10049 1 snd_es1968, Live 0xd8858000
snd_rawmidi 28641 1 snd_mpu401_uart, Live 0xd8862000
snd_seq_device 8781 1 snd_rawmidi, Live 0xd8854000
snd 56741 11 snd_es1968,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xd8896000
soundcore 10785 2 snd, Live 0xd883f000
floppy 64753 0 - Live 0xd8885000
dm_snapshot 17669 0 - Live 0xd8839000
dm_zero 2497 0 - Live 0xd8815000
dm_mirror 25773 0 - Live 0xd8831000
ext3 131145 2 - Live 0xd88ac000
jbd 82777 1 ext3, Live 0xd886f000
dm_mod 59221 6 dm_snapshot,dm_zero,dm_mirror, Live 0xd8844000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : pcmcia_socket1
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1100-110f : 0000:00:07.1
1100-1107 : ide0
1108-110f : ide1
1400-141f : 0000:00:07.3
1400-1407 : piix4-smbus
3100-31ff : 0000:00:10.0
3100-31ff : ESS Maestro
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
4800-48ff : PCI CardBus #06
4c00-4cff : PCI CardBus #06
8000-9fff : PCI Bus #01
8000-80ff : 0000:01:00.0
f300-f31f : 0000:00:07.2
f300-f31f : uhci_hcd
/proc/iomem
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000e2000-000e27ff : Adapter ROM
000e3000-000e3fff : Adapter ROM
000e7000-000e7fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-17ffffff : System RAM
00100000-00366683 : Kernel code
00366684-004123ff : Kernel data
18000000-18000fff : 0000:00:0a.0
18000000-18000fff : yenta_socket
18001000-18001fff : 0000:00:0a.1
18001000-18001fff : yenta_socket
18400000-187fffff : PCI CardBus #02
18800000-18bfffff : PCI CardBus #02
18c00000-18ffffff : PCI CardBus #06
19000000-193fffff : PCI CardBus #06
60000000-60000fff : pcmcia_socket1
a0000000-a3ffffff : 0000:00:00.0
d0000000-d7ffffff : PCI Bus #01
d8000000-dfffffff : PCI Bus #01
d8000000-d8ffffff : 0000:01:00.0
d9000000-d9000fff : 0000:01:00.0
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: d8000000-dfffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 1100 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at f300 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: CLEVO/KAPOK Computer: Unknown device 3102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 20
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 18400000-187ff000 (prefetchable)
Memory window 1: 18800000-18bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
Subsystem: CLEVO/KAPOK Computer: Unknown device 3102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size 20
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 18001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 18c00000-18fff000 (prefetchable)
Memory window 1: 19000000-193ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:10.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
Subsystem: CLEVO/KAPOK Computer: Unknown device 3102
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 3100 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 3102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 8000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
not present
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
kernel 2.6.10-1.766_FC3 works OK
Please feel free to contact me if I can provide you with any more information.
Alan
next reply other threads:[~2005-05-10 2:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-10 2:22 Alan Lake [this message]
2005-05-10 4:05 ` PROBLEM: Mouse pad doesn't work Dmitry Torokhov
2005-05-10 21:58 ` ALPS touchpad issues still exist in 2.6.12-rc4 Daniel Drake
2005-05-10 22:20 ` Dmitry Torokhov
2005-05-10 23:17 ` Stuart Shelton
2005-05-11 1:59 ` ALPS touchpad issues still exist in 2.6.12-rc4h Dmitry Torokhov
2005-05-11 18:39 ` ALPS touchpad issues still exist in 2.6.12-rc4 Stuart Shelton
2005-06-25 12:34 ` ALPS touchpad issues still exist in 2.6.12-rc4h Roman Zippel
2005-06-25 12:48 ` Vojtech Pavlik
2005-06-25 13:08 ` Roman Zippel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42801AEE.5080308@lakeinfoworks.com \
--to=alan.lake@lakeinfoworks.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.