From: Anthony Liguori <aliguori@us.ibm.com>
To: Mike Wray <mike.wray@hp.com>
Cc: xen-devel@lists.xensource.com
Subject: Re: Xeno-unstable crashing at boot
Date: Fri, 13 May 2005 13:48:13 -0500 [thread overview]
Message-ID: <4284F66D.3040507@us.ibm.com> (raw)
In-Reply-To: <4284F148.8000802@hp.com>
Mike Wray wrote:
> I'm getting the following crash every time I boot xeno-unstable.
I was seeing a crash at a similar time during boot. Keir checked in a
fix last night that fixed the problem. See bug #36.
Regards,
Anthony Liguori
> Mike
>
> Xen version 3.0-devel (mjw@hpl.hp.com) (gcc version 3.2.2 20030222
> (Red Hat Linux 3.2.2-5)) Fri May 13 15:30:05 BST 2005
> Latest ChangeSet: 2005/05/13 15:37:25 1.1401
> 4284bba5zgcyWRg6WwOIZIaOia4E2g
>
> (XEN) Physical RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e8000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 000000007fff7b00 (usable)
> (XEN) 000000007fff7b00 - 0000000080000000 (reserved)
> (XEN) 00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 2047MB (2096728kB)
> (XEN) Xen heap: 10MB (10756kB)
> (XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000,
> vendor = 0
> (XEN) CPU#0: Physical ID: 0, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) found SMP MP-table at 000f9bf0
> (XEN) ACPI: RSDP (v000 COMPAQ ) @
> 0x000ea810
> (XEN) ACPI: RSDT (v001 COMPAQ CPQ0054 0x20030821 0x00000000) @
> 0x7fff7b40
> (XEN) ACPI: FADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @
> 0x7fff7bf8
> (XEN) ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @
> 0x7fff894d
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 0x0100000e) @
> 0x7fff8ee7
> (XEN) ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000e) @
> 0x7fff9433
> (XEN) ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000e) @
> 0x7fff95ce
> (XEN) ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 0x0100000e) @
> 0x7fff98d6
> (XEN) ACPI: SSDT (v001 COMPAQ UART2 0x00000001 MSFT 0x0100000e) @
> 0x7fff9e15
> (XEN) ACPI: SSDT (v001 COMPAQ FLOPPY 0x00000001 MSFT 0x0100000e) @
> 0x7fff9f7c
> (XEN) ACPI: MADT (v001 COMPAQ PLACER 0x00000001 0x00000000) @
> 0x7fff7c6c
> (XEN) ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000e) @
> 0x7fffba41
> (XEN) ACPI: ASF! (v016 COMPAQ PLACER 0x00000001 0x00000000) @
> 0x7fff7cf0
> (XEN) ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffa538
> (XEN) ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffa95c
> (XEN) ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 0x0100000e) @
> 0x7fffaac9
> (XEN) ACPI: SSDT (v001 COMPAQ S1 0x00000001 MSFT 0x0100000e) @
> 0x7fffabe2
> (XEN) ACPI: SSDT (v001 COMPAQ L08 0x00000001 MSFT 0x0100000e) @
> 0x7fffb7e4
> (XEN) ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000e) @
> 0x7fffbbdc
> (XEN) ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @
> 0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
> (XEN) Processor #6 15:2 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: Borrowed Virtual Time (bvt)
> (XEN) Initializing CPU#0
> (XEN) Detected 2791.093 MHz processor.
> (XEN) CPU0 booted
> (XEN) Booting processor 1/6 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU1: Before vendor init, caps: bfebfbff 00000000 00000000,
> vendor = 0
> (XEN) CPU#1: Physical ID: 3, Logical ID: 0
> (XEN) CPU caps: afebfbff 00000000 00000000 00000000
> (XEN) CPU1 has booted.
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) checking TSC synchronization across CPUs: passed.
> (XEN) Time init:
> (XEN) .... cpu_freq: 00000000:A65CB560
> (XEN) .... scale: 00000001:6EE19BBD
> (XEN) .... Wall Clock: 1115998803s 140000us
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,LOADER=generic'
>
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 08000000->10000000
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: c0100000->c05d00e0
> (XEN) Init. ramdisk: c05d1000->c05d1000
> (XEN) Phys-Mach map: c05d1000->c05f1000
> (XEN) Page tables: c05f1000->c05f4000
> (XEN) Start info: c05f4000->c05f5000
> (XEN) Boot stack: c05f5000->c05f6000
> (XEN) TOTAL: c0000000->c0800000
> (XEN) ENTRY ADDRESS: c0100000
> (XEN) Scrubbing Free RAM: .....................done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen).
> (XEN) BUG at domain.c:125
> (XEN) CPU: 0
> (XEN) EIP: 0808:[<ff10618c>]
> (XEN) EFLAGS: 00210296 CONTEXT: hypervisor
> (XEN) eax: 00000000 ebx: ffbf6900 ecx: 000003f8 edx: 00000000
> (XEN) esi: ffbf3080 edi: c0453729 ebp: 00000002 esp: ff103f88
> (XEN) ds: 0810 es: 0810 fs: 0810 gs: 0810 ss: 0810 cs: 0808
> (XEN) Stack trace from ESP=ff103f88:
> (XEN) ff143308 ff143347 0000007d c0102ff4 c0453729 ffbf3080
> c0102ff4 [ff106198]
> (XEN) [ff106190] 00000808 00210292 [ff135165] 00002834 fbff1000
> 00000432 00000024
> (XEN) c0453729 00000002 00000000 000e0000 00000000 00000819
> 00210217 c0103000
> (XEN) 00000821 00000821 00000821 00000000 00000000 ffbf3080
> (XEN) Call Trace from ESP=ff103f88:
> (XEN) [<ff106198>] [<ff106190>] [<ff135165>]
>
> ****************************************
> CPU0 FATAL TRAP: vector = 6 (invalid operand)
> [error_code=0000]
> Aieee! CPU0 is toast...
> ****************************************
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
next prev parent reply other threads:[~2005-05-13 18:48 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-13 18:26 Xeno-unstable crashing at boot Mike Wray
2005-05-13 18:46 ` David F Barrera
2005-05-13 18:48 ` Anthony Liguori [this message]
2005-05-13 18:56 ` Mike Wray
-- strict thread matches above, loose matches on Subject: below --
2005-05-13 18:43 Ian Pratt
2005-05-13 18:55 ` Mike Wray
2005-05-13 19:42 Ian Pratt
2005-05-13 20:20 ` Kip Macy
2005-05-16 12:57 ` Mike Wray
2005-05-16 13:27 Ian Pratt
2005-05-16 13:29 ` Steven Hand
2005-05-16 13:33 ` Mark Williamson
2005-05-16 18:18 ` Mike Wray
2005-05-16 19:55 Ian Pratt
2005-05-17 9:19 ` Mike Wray
2005-05-17 10:29 ` Christian Limpach
2005-05-17 11:52 ` Mike Wray
2005-05-17 13:26 ` Keir Fraser
2005-05-17 18:23 ` Mike Wray
2005-05-17 19:49 ` Keir Fraser
2005-05-19 10:42 ` Mike Wray
2005-05-19 14:18 ` Keir Fraser
2005-05-19 16:22 ` Mike Wray
2005-05-19 16:43 Ian Pratt
2005-05-20 16:24 ` Mike Wray
2005-05-20 17:16 ` Anthony Liguori
2005-05-20 16:58 Nakajima, Jun
2005-05-20 21:42 ` Christian Limpach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4284F66D.3040507@us.ibm.com \
--to=aliguori@us.ibm.com \
--cc=mike.wray@hp.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.