From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Soete Subject: [parisc-linux] ncr53c8xx 64bit verbose boot info Date: Sat, 21 May 2005 14:46:56 +0000 Message-ID: <428F49E0.6070004@tiscali.be> References: <4282FEEC00003588@mail-2-bnl.tiscali.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Cc: James Bottomley To: PARISC list Return-Path: In-Reply-To: <4282FEEC00003588@mail-2-bnl.tiscali.it> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Joel Soete wrote: > Hello James, > > >>On Fri, 2005-05-20 at 19:16 +0200, Joel Soete wrote: >> >>>Btw I also have an external bootable disk narrow SE connected to the > > s710 > >>>driver. Do you know if this one is 64bit capable? >> >>The lasi700 driver works fine in a 64 bit kernel, yes. >> > > Cool, I will so be able to test more (sorry not next week (i will be on training) > but next one) ;-) > > btw any idea as starting point of investigation to make ncr53c8xx driver > 64bit capable? > (a mail ref, ...) > Ah I remember that ncr verbose (iirc 3) boot info collected: 32bit kernel: [...] zalon_probe: Zalon version 1, IRQ 67 ncr53c720-0: rev 0xf irq 67 ncr53c720-0: using memory mapped IO at virtual address 0xf1004800 ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential ncr53c720-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/20/00/80/00 ncr53c720-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/80/20/00/88/00 ncr53c720-0: resetting, command processing suspended for 2 seconds ncr53c720-0: restart (scsi reset). scsi0 : ncr53c8xx-3.4.3g ncr53c720-0: command processing resumed Vendor: SEAGATE Model: ST39173WC Rev: HP11 Type: Direct-Access ANSI SCSI revision: 02 0:0:5:0: tagged command queue depth set to 8 target0:0:5: Beginning Domain Validation [...] 64bit: [...] zalon_probe: Zalon version 1, IRQ 66 ncr53c720-0: rev 0xf irq 66 ncr53c720-0: using memory mapped IO at virtual address 0xfffffffff1004800 ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential ncr53c720-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/20/00/80/00 ncr53c720-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/80/20/00/88/00 ncr53c720-0: resetting, command processing suspended for 2 seconds ncr53c720-0: restart (scsi reset). scsi0 : ncr53c8xx-3.4.3g ncr53c720-0: command processing resumed # till there all seems ok but after? ncr53c720-0: resetting, command processing suspended for 2 seconds ncr53c720-0: restart (scsi reset). ncr53c720-0: command processing resumed scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lu n 0 ncr53c720-0: resetting, command processing suspended for 2 seconds ncr53c720-0: restart (scsi reset). ncr53c720-0: command processing resumed scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 5 lu n 0 ncr53c720-0: resetting, command processing suspended for 2 seconds ...hung here mmm strange in 32bit zalon_probe() used IRQ 67 while the 64bit used IRQ 66, is that important? Thanks, Joel _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux