From: Brad Midgley <bmidgley@xmission.com>
To: bluez-devel@lists.sourceforge.net
Subject: Re: [Bluez-devel] pskey bootmode value
Date: Sun, 22 May 2005 09:02:13 -0600 [thread overview]
Message-ID: <42909EF5.7060204@xmission.com> (raw)
In-Reply-To: <Pine.LNX.4.33.0505221634050.32193-100000@redbean.intranet.gw-instruments.de>
Peter,
Maybe you didn't see that Marcel put a "pskey" program in
bluez-utils-cvs. It will look up the bootmode key but doesn't give any
suggestions for the value.
I just updated the adapter:
/usr/src/bluez/utils/tools/pskey -i hci1 bootmode 0
and it's working with the new default bootmode. I disliked the hid2hci
requirement so this is nice.
Brad
Peter Wippich wrote:
> Hi Brad,
>
> there is a PSKEY which allows you to set the default Boot Mode if you
> don't want the dongle to start up in HID mode you've to set this to Boot Mode 0
> (HCI). If you don't have the CSR software to change this: it is PSKEY
> 0x03CD. Should be 0001 on your device. Set to 0000 to boot up in HCI mode.
>
> Good luck,
>
> Peter
>
>
> On Sun, 22 May 2005, Brad Midgley wrote:
>
>
>>Peter,
>>
>>Thanks for the confirmation.
>>
>>Yes, this is a CSR dongle (it's the dlink dbt-120, notorious for
>>prefering hid mode after the v1.2 firmware update from apple)
>>
>>i believe I saw code in pskey to bail out if it's not a CSR chip...
>>
>>brad
>>
>>Peter Wippich wrote:
>>
>>>Hi Brad,
>>>
>>>bootmode is nothing which depends on BlueZ but on the dongle you use. If
>>>you have a CSR Dongle which uses the BlueLab Dual Boot Firmware than
>>>bootmode 0 is HCI and bootmode 1 is HID mode. However, every
>>>manufacturer can choose what he wants....
>>>
>>>To be sure what you have you have to consult the manufacturers
>>>documentation for your dongle. But I'm afraid for most devices this isn't
>>>documented at all.
>>>
>>>Ciao,
>>>
>>>Peter
>>>
>>>
>>>On Fri, 20 May 2005, Brad Midgley wrote:
>>>
>>>
>>>
>>>>Hi
>>>>
>>>>What bootmode value should I use for hci? I see 0x0001 for hid but I
>>>>don't want to just "guess" that it's 0...
>>>>
>>>>Brad
>>>>
>>>>
>>>>-------------------------------------------------------
>>>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>>>Want to be the first software developer in space?
>>>>Enter now for the Oracle Space Sweepstakes!
>>>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>>>_______________________________________________
>>>>Bluez-devel mailing list
>>>>Bluez-devel@lists.sourceforge.net
>>>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>>>
>>>
>>>
>>>| Peter Wippich Voice: +49 30 46776411 |
>>>| G&W Instruments GmbH fax: +49 30 46776419 |
>>>| Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@gw-instruments.de |
>>>| D-13355 Berlin / Germany |
>>>
>>>
>>>
>>>
>>>-------------------------------------------------------
>>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>>Want to be the first software developer in space?
>>>Enter now for the Oracle Space Sweepstakes!
>>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>>_______________________________________________
>>>Bluez-devel mailing list
>>>Bluez-devel@lists.sourceforge.net
>>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>
>>
>>-------------------------------------------------------
>>This SF.Net email is sponsored by Oracle Space Sweepstakes
>>Want to be the first software developer in space?
>>Enter now for the Oracle Space Sweepstakes!
>>http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
>>_______________________________________________
>>Bluez-devel mailing list
>>Bluez-devel@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-devel
>>
>
>
> | Peter Wippich Voice: +49 30 46776411 |
> | G&W Instruments GmbH fax: +49 30 46776419 |
> | Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@gw-instruments.de |
> | D-13355 Berlin / Germany |
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by Oracle Space Sweepstakes
> Want to be the first software developer in space?
> Enter now for the Oracle Space Sweepstakes!
> http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2005-05-22 15:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-21 3:57 [Bluez-devel] pskey bootmode value Brad Midgley
2005-05-22 13:50 ` Peter Wippich
2005-05-22 14:25 ` Brad Midgley
2005-05-22 14:41 ` Peter Wippich
2005-05-22 15:02 ` Brad Midgley [this message]
2005-05-22 15:12 ` Peter Wippich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42909EF5.7060204@xmission.com \
--to=bmidgley@xmission.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.