From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Coletti Subject: Re: [parisc-linux] If this is the last message you see Date: Tue, 24 May 2005 18:10:43 -0300 Message-ID: <42939853.4090706@xtech.com.ar> References: <429246BD.7020606@xtech.com.ar> <42932260.4070507@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed To: parisc-linux@lists.parisc-linux.org Return-Path: In-Reply-To: <42932260.4070507@gmail.com> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org cbeerse@gmail.com wrote: > Daniel Coletti wrote: >> Hi, >> I am trying to install Debian on a HP-9000 D370. The booting works >> fine, I interacted a lot with the HP IPL and got it to boot from the >> CD and everything. >> It boots, but is this very nice message at the bottom of my serial >> console terminal that says ``If this is the last message you see [...] >> check the FAQ and/or mailing lists´´. Well, I have and found no answer >> for my problem. >> I did try a lot of different devices on the kernel booting line, >> parameter "console=" to be precise. >> >> ttyS0, ttyS1, tty0, tty1, and other things that I saw other people tried. > > You should not change the console-setting to the kernel, you should > switch cables from serial one to serial 2 at the moment you see the > message. As far as I recall, you have some time to do so before you > start missing boot-messages. thanks, that was it ... I did have to change the console= parameter because it defaults to ttyB0 and does not work (ttyS0 does in the Serial port no. 2). Now I have problems with term emulation (I have a hp 700/96 terminal), nothing a serial cable with minicom can't handle. thanks again, daniel// > > If you remove the support-board, the console will not be moved from > serial 1 to serial 2. Since the board is (afaik) not supported (what > does it do at all?) there is no harm in removing it. > >> >> Am I pointing to the right direction? or I have to change something >> else? What other values can I try? >> > > none at all. > > > Success, > > CBee > -- Daniel Coletti XTech (Soluciones Linux para Empresas) - http://www.xtech.com.ar 25 de Mayo 293 - 5to. 'B' Buenos Aires, Argentina _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux