From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Teun To: bluez-devel@lists.sourceforge.net Message-id: <42945836.5040608@planet.nl> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Subject: [Bluez-devel] No sound with Canyon CN-BTH1 and CN-BTU1 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 25 May 2005 12:49:26 +0200 Hi , i've a small problem with my headset en usb stick from canyon. I have no sound with my canyon CN-BTH1 I compiled kernel 2.6.11.9 with build in alsa usb bluetooth : Canyon CN-BTU1 headset : canyon CN-BTH1 distro : SuSE 9.2 when i changes the sound volume the headset response perfecty with noise, but thats it. I tried with another usb-stick BT180 from trust (also silicone wave chip inside) but there is no difference. Who can help me ? Thanx anyway ! Loopback from kmix don't do anything, but i haven't test this before.. _starting :_ modprobe snd_bt_sco (start as root) kmix (starting as user) at this time kmix found BT headset starting btsco (as user) achilles@office:~> btsco -v 00:0a:94:8e:3B:b8 btsco v0.4b Device is 1:0 Voice setting: 0x0060 RFCOMM channel 1 connected when changing volume from mic of speaker in kmix it changed in my headset and i see it changing on screen (btsco). office:/home/achilles # hciconfig -a hci0: Type: USB BD Address: 00:0A:94:11:4F:8E ACL MTU: 120:20 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:763 acl:23 sco:0 events:45 errors:0 TX bytes:678 acl:16 sco:0 commands:23 errors:0 Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ office (0)' Class: 0x100100 Service Classes: Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x0 LMP Ver: 1.1 (0x1) LMP Subver: 0x757 Manufacturer: Silicon Wave (11) office:/home/achilles # hciconfig hci0 revision hci0: Type: USB BD Address: 00:0A:94:11:4F:8E ACL MTU: 120:20 SCO MTU: 64:0 Unsupported manufacturer office:/home/achilles # hcitool info 00:0a:94:8e:3b:b8 Requesting information ... BD Address: 00:0a:94:8e:3b:b8 Device Name: BT Headset-F LMP Version: 1.1 (0x1) LMP Subversion: 0x434 Manufacturer: Cambridge Silicon Radio (10) Features: 0xfc 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 office:/home/achilles # hcidump -X HCIDump - HCI packet analyzer ver 1.11 device: hci0 snap_len: 1028 filter: 0xffffffff (from another shell : ) achilles@office:~> aplay -B 100000 -D plughw:Headset /opt/kde3/share/sounds/KDE_Startup_new.wav Playing WAVE '/opt/kde3/share/sounds/KDE_Startup_new.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo hangs .... but info from btsco -V : speaker volume: 0 mic volume: 0 i/o needed: connecting sco... connected SCO channel Done setting sco fd recieved AT+VGS=15 Sending up speaker change 15 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+VGS=15 Sending up speaker change 15 speaker volume: 15 mic volume: 1 driver is not in use disconnected SCO channel lot of output to hcidump : > SCO data: handle 0x0100 dlen 48 0000: 84 ff a6 ff dd ff b4 ff 90 ff 99 ff 76 ff 89 ff ...........v... 0010: 7b ff 53 ff 64 ff 44 ff 4b ff 6b ff 66 ff 8c ff {.S.d.D.K.k.f... 0020: 7c ff 7c ff 94 ff 6d ff 80 ff 81 ff 81 ff a6 ff |.|...m......... > SCO data: handle 0x0100 dlen 48 0000: 6a ff 4d ff 66 ff 7f ff 9a ff 7e ff 81 ff a7 ff j.M.f.....~..... 0010: b7 ff b3 ff 97 ff 92 ff 98 ff aa ff 9c ff 7a ff .............z. 0020: 9a ff 9e ff 84 ff 85 ff 84 ff 88 ff 8d ff 8c ff ............... > SCO data: handle 0x0100 dlen 48 0000: 81 ff 84 ff 8e ff 95 ff 9b ff 8c ff 90 ff 96 ff ............... 0010: 98 ff 9b ff 97 ff ad ff ac ff b5 ff d1 ff bc ff ............... 0020: af ff 9a ff 70 ff 91 ff 92 ff 6d ff a7 ff 93 ff ...p.....m..... > SCO data: handle 0x0100 dlen 48 0000: 75 ff 8a ff 49 ff 55 ff 59 ff 44 ff 7a ff 81 ff u...I.U.Y.D.z... 0010: 7a ff 76 ff 8d ff ad ff 86 ff 7a ff 86 ff 8b ff z.v.......z..... 0020: 9e ff 98 ff a1 ff d0 ff e0 ff be ff 97 ff 93 ff ............... > SCO data: handle 0x0100 dlen 48 0000: 9c ff 9d ff 82 ff 73 ff a2 ff 8b ff 6d ff 8e ff .....s.....m... 0010: 7c ff 7d ff 73 ff 74 ff b0 ff 9b ff 8c ff b5 ff |.}.s.t......... 0020: ad ff ae ff ae ff 9a ff af ff c1 ff bf ff b8 ff ............... and a lot more (pages) finaly when i push a button on my headset (with disconnected SCO channel) output from btsco : recieved AT+CKPD=200 ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel