From: Michael Krufky <mike@krufky.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@osdl.org
Subject: [PATCH] DViCO FusionHDTV3 Gold-T documentation fix
Date: Fri, 03 Jun 2005 22:52:22 -0400 [thread overview]
Message-ID: <42A11766.7080902@krufky.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 385 bytes --]
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is
printed on the card. This fix corrects the error in all places, and
corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation.
This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's
patch "Add support for PixelView Ultra Pro in v4l" (because of the
change from card=27 to card=28)
[-- Attachment #2: dvico-fusionhdtv-3-gold-t-documentation.patch --]
[-- Type: text/plain, Size: 3480 bytes --]
diff -upr a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
--- a/Documentation/video4linux/CARDLIST.cx88 2005-06-03 21:29:24.000000000 +0000
+++ b/Documentation/video4linux/CARDLIST.cx88 2005-06-03 22:13:49.000000000 +0000
@@ -26,4 +26,4 @@ card=24 - Hauppauge WinTV 28xxx (Roslyn)
card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
card=26 - IODATA GV/BCTV7E
card=27 - PixelView PlayTV Ultra Pro (Stereo)
-card=28 - DViCO - FusionHDTV 3 Gold-Q
+card=28 - DViCO - FusionHDTV 3 Gold-T
diff -upr a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
--- a/Documentation/video4linux/CARDLIST.tuner 2005-06-03 21:29:24.000000000 +0000
+++ b/Documentation/video4linux/CARDLIST.tuner 2005-06-03 22:13:31.000000000 +0000
@@ -58,4 +58,4 @@ tuner=56 - Philips PAL/SECAM multi (FQ12
tuner=57 - Philips FQ1236A MK4
tuner=58 - Ymec TVision TVF-8531MF
tuner=59 - Ymec TVision TVF-5533MF
-tuner=60 - Thomson DDT 7611
+tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
diff -upr a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
--- a/drivers/media/video/cx88/cx88-cards.c 2005-06-03 21:54:36.000000000 +0000
+++ b/drivers/media/video/cx88/cx88-cards.c 2005-06-03 22:10:56.000000000 +0000
@@ -428,16 +428,11 @@ struct cx88_board cx88_boards[] = {
.vmux = 2,
.gpio0 = 0x0f00,
}},
-#if 0
- .ts = {
- .type = CX88_TS,
- .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
- }
-#endif
- },
- [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
- .name = "DViCO - FusionHDTV 3 Gold-Q",
- .tuner_type = 52, /* Thomson DDT 7610 ATSC/NTSC - Its actually a 7611 chip, but this works */
+ },
+ [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = {
+ .name = "DViCO - FusionHDTV 3 Gold-T",
+ .tuner_type = 52, /* Thomson DDT 7611 ATSC/NTSC */
+ /* See DViCO FusionHDTV 3 Gold for GPIO documentation. */
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
@@ -455,12 +450,6 @@ struct cx88_board cx88_boards[] = {
.vmux = 2,
.gpio0 = 0x0f00,
}},
-#if 0
- .ts = {
- .type = CX88_TS,
- .gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
- }
-#endif
},
[CX88_BOARD_HAUPPAUGE_DVB_T1] = {
.name = "Hauppauge Nova-T DVB-T",
@@ -723,7 +712,7 @@ struct cx88_subid cx88_subids[] = {
},{
.subvendor = 0x18ac,
.subdevice = 0xd820,
- .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+ .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T,
},{
.subvendor = 0x18AC,
.subdevice = 0xDB00,
diff -upr a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
--- a/drivers/media/video/cx88/cx88.h 2005-06-03 21:54:36.000000000 +0000
+++ b/drivers/media/video/cx88/cx88.h 2005-06-03 21:55:44.000000000 +0000
@@ -163,7 +163,7 @@ extern struct sram_channel cx88_sram_cha
#define CX88_BOARD_DIGITALLOGIC_MEC 25
#define CX88_BOARD_IODATA_GVBCTV7E 26
#define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27
-#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q 28
+#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T 28
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
reply other threads:[~2005-06-04 2:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42A11766.7080902@krufky.com \
--to=mike@krufky.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.