From mboxrd@z Thu Jan 1 00:00:00 1970 From: "E.Gryaznova" Subject: Re: extract files without mounting a partition? Date: Tue, 07 Jun 2005 11:05:39 +0400 Message-ID: <42A54743.5000506@namesys.com> References: <200506061130.38536.rdeepak@nmsworks.co.in> <1118046894.3188.51.camel@tribesman.namesys.com> <200506061422.34983.rdeepak@nmsworks.co.in> <200506061500.41547.rdeepak@nmsworks.co.in> <7e6ceab3050606170723dba2d2@mail.gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: list-help: list-unsubscribe: list-post: Errors-To: flx@namesys.com In-Reply-To: <7e6ceab3050606170723dba2d2@mail.gmail.com> List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Deepak Ram Cc: vs@namesys.com, reiserfs-dev@namesys.com, reiserfs-list@namesys.com Hello. Would you please send us the following : 1. # cat /proc/mdstat 2. the raid configuration file wich you used for creating this md0? Thanks, Lena Deepak Ram wrote: >>>On Monday 06 June 2005 14:04, you wrote: >>> >>> >>>>Hello >>>> >>>>On Mon, 2005-06-06 at 10:00, R Deepak wrote: >>>> >>>> >>>>>Greets! >>>>> >>>>>Can I ask support questions here? If not, sorry.. :( >>>>> >>>>>I have a RAID0 config with 2 80GB SATA disks. I screwed up during an >>>>>install and the super block got overwritten. >>>>> >>>>>When I ran reiserfsck on /dev/md0, it asked me to use --rebuild-sb >>>>>Which I did. It reported quite a few errors and moved lots of files >>>>>to lost+found. >>>>> >>>>>Now the problem is that I am not able to mount this partition. I've >>>>>tried with different kernels, gentoo 2005.0 live CD (amd64), knoppix >>>>>(32bit), and an old gentoo 2004.1 (x86) live CD. >>>>> >>>>>As soon as I try to mount it, I get something like the following >>>>> >>>>>ReiserFS: md0: found reiserfs format "3.6" with standard journal >>>>> >>>>> >>>>> >>>>There should be more than that. Can you please show all kernel logs >>>>related to the problem. >>>> >>>> >>>There is.. I'll have to write it down since everything freezes. Will send >>>the whole thing as soon as I get back home. >>> >>> >>You should use either serial console or netconsole to catch kernel logs >>in case when they do not manage to not get written to log files. >>You can read linux/Documentation/serial-console.txt and >>linux/Documentation/networking/netconsole.txt about those things. >> >> > >'ve attached the dmesg output and the output of "debugreiserfs >/dev/md0". Should I send you something else? > >One correction though.. the system didn't freeze. There was just an oops. > >Please help.. > >Regards >Deepak > > >------------------------------------------------------------------------ > >gt64 root # debugreiserfs /dev/md0 >debugreiserfs 3.6.19 (2003 www.namesys.com) > > >Filesystem state: consistent > >Reiserfs super block in block 2 on 0x900 of format 3.6 with standard journal >Count of blocks on the device: 39074048 >Number of bitmaps: 1193 >Blocksize: 4096 >Free blocks (count of blocks - used [journal, bitmaps, data, reserved] blocks): 8088863 >Root block: 30086 >Filesystem is clean >Tree height: 5 >Hash function used to sort names: "r5" >Objectid map size 972, max 972 >Journal parameters: > Device [0x0] > Magic [0x7e8f0ae8] > Size 8193 blocks (including 1 for journal header) (first block 1196) > Max transaction length 1024 blocks > Max batch size 900 blocks > Max commit age 30 >Blocks reserved by journal: 0 >Fs state field: 0x0: >sb_version: 2 >inode generation number: 25219262 >UUID: 2234f94c-a9be-46ec-9bb7-018a53f424b4 >LABEL: >Set flags in SB: > ATTRIBUTES CLEAN > > >------------------------------------------------------------------------ > >Bootdata ok (command line is root=/dev/hda2 vga=9) >Linux version 2.6.11-gentoo-r9 (root@livecd) (gcc version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 Sun Jun 5 11:03:09 IST 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) > BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) > BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) > BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000faac0 >ACPI: XSDT (v001 A M I OEMXSDT 0x08000403 MSFT 0x00000097) @ 0x000000003ff30100 >ACPI: FADT (v003 A M I OEMFACP 0x08000403 MSFT 0x00000097) @ 0x000000003ff30290 >ACPI: MADT (v001 A M I OEMAPIC 0x08000403 MSFT 0x00000097) @ 0x000000003ff30390 >ACPI: OEMB (v001 A M I OEMBIOS 0x08000403 MSFT 0x00000097) @ 0x000000003ff40040 >ACPI: DSDT (v001 A0091 A0091006 0x00000006 MSFT 0x0100000d) @ 0x0000000000000000 >On node 0 totalpages: 261936 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 257840 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:12 APIC version 16 >ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >Using ACPI (MADT) for SMP configuration information >Checking aperture... >CPU 0: aperture @ e0000000 size 256 MB >Built 1 zonelists >Kernel command line: root=/dev/hda2 vga=9 console=tty0 >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 131072 bytes) >time.c: Using 1.193182 MHz PIT timer. >time.c: Detected 1802.347 MHz processor. >Console: colour VGA+ 132x44 >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Memory: 1024160k/1047744k available (3253k kernel code, 22880k reserved, 1192k data, 172k init) >Calibrating delay loop... 3538.94 BogoMIPS (lpj=1769472) >Mount-cache hash table entries: 256 (order: 0, 4096 bytes) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00 > tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired >Parsing all Control Methods:........................................................................................................................................... >Table [DSDT](id F004) - 517 Objects with 44 Devices 139 Methods 25 Regions >ACPI Namespace successfully loaded at root ffffffff805d03c0 >evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful >Using local APIC NMI watchdog using perfctr0 >Using local APIC timer interrupts. >Detected 12.516 MHz APIC timer. >NET: Registered protocol family 16 >PCI: Using configuration type 1 >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20050211 >evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 >evgpeblk-0987 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs in this block >Completing Region/Field/Buffer/Package initialization:........................................................................................................................ >Initialized 24/25 Regions 44/44 Fields 39/39 Buffers 13/14 Packages (526 nodes) >Executing all Device _STA and_INI methods:............................................... >47 Devices found containing: 47 _STA, 0 _INI methods >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >PCI: Via IRQ fixup >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 10 devices >SCSI subsystem initialized >usbcore: registered new driver usbfs >usbcore: registered new driver hub >PCI: Using ACPI for IRQ routing >** PCI interrupts are no longer routed automatically. If this >** causes a device to stop working, it is probably because the >** driver failed to call pci_enable_device(). As a temporary >** workaround, the "pci=routeirq" argument restores the old >** behavior. If this argument makes the device work again, >** please email the output of "lspci" to bjorn.helgaas@hp.com >** so I can fix the driver. >TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) >agpgart: Detected AGP bridge 0 >agpgart: Maximum main memory to use for agp memory: 941M >agpgart: AGP aperture is 256M @ 0xe0000000 >PCI-DMA: Disabling IOMMU. >IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ >Total HugeTLB memory allocated, 0 >inotify device minor=63 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >Initializing Cryptographic API >Real Time Clock Driver v1.12 >Non-volatile memory driver v1.2 >Linux agpgart interface v0.100 (c) Dave Jones >Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). >ACPI: Power Button (FF) [PWRF] >ACPI: Sleep Button (CM) [SLPB] >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard on isa0060/serio0 >input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 >input: PC Speaker >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >floppy0: no floppy controllers found >loop: loaded (max 8 devices) >nbd: registered device at major 43 >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >VP_IDE: IDE controller at PCI slot 0000:00:0f.1 >ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 >VP_IDE: chipset revision 6 >VP_IDE: not 100% native mode: will probe irqs later >VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 > ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio >Probing IDE interface ide0... >hda: QUANTUM FIREBALLlct15 20, ATA DISK drive >hdb: Maxtor 6Y200P0, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hdc: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >Probing IDE interface ide2... >Probing IDE interface ide3... >Probing IDE interface ide4... >Probing IDE interface ide5... >hda: max request size: 128KiB >hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(66) >hda: cache flushes not supported > hda: hda1 hda2 >hdb: max request size: 1024KiB >hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133) >hdb: cache flushes supported > hdb: hdb1 hdb2 < hdb5 > hdb3 hdb4 >hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(66) >Uniform CD-ROM driver Revision: 3.20 >libata version 1.10 loaded. >sata_via version 1.1 >ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 >sata_via(0000:00:0f.0): routed to hard irq line 4 >ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169 >ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169 >ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f >ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 >ata1: dev 0 configured for UDMA/133 >scsi0 : sata_via >ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f >ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 >ata2: dev 0 configured for UDMA/133 >scsi1 : sata_via > Vendor: ATA Model: ST380013AS Rev: 3.18 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: ATA Model: ST380013AS Rev: 3.18 > Type: Direct-Access ANSI SCSI revision: 05 >SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sda: drive cache: write back >SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sda: drive cache: write back > sda: sda1 >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 >SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sdb: drive cache: write back >SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) >SCSI device sdb: drive cache: write back > sdb: sdb1 >Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 >ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 >ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 >ehci_hcd 0000:00:10.4: irq 177, pci mem 0xfdf00000 >ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 8 ports detected >ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) >USB Universal Host Controller Interface driver v2.2 >ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 >uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller >uhci_hcd 0000:00:10.0: irq 177, io base 0xdc00 >uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 >uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) >uhci_hcd 0000:00:10.1: irq 177, io base 0xec00 >uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 >uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) >uhci_hcd 0000:00:10.2: irq 177, io base 0xc000 >uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 >uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) >uhci_hcd 0000:00:10.3: irq 177, io base 0xc400 >uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb 2-2: new full speed USB device using uhci_hcd and address 2 >usbcore: registered new driver usbhid >drivers/usb/input/hid-core.c: v2.0:USB HID core driver >md: linear personality registered as nr 1 >md: raid0 personality registered as nr 2 >md: raid1 personality registered as nr 3 >md: raid10 personality registered as nr 9 >md: raid5 personality registered as nr 4 >raid5: automatically using best checksumming function: generic_sse > generic_sse: 5444.000 MB/sec >raid5: using function: generic_sse (5444.000 MB/sec) >raid6: int64x1 1472 MB/s >raid6: int64x2 2132 MB/s >raid6: int64x4 2253 MB/s >raid6: int64x8 1542 MB/s >raid6: sse2x1 1085 MB/s >raid6: sse2x2 1921 MB/s >raid6: sse2x4 2511 MB/s >raid6: using algorithm sse2x4 (2511 MB/s) >md: raid6 personality registered as nr 8 >md: multipath personality registered as nr 7 >md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 >oprofile: using NMI interrupt. >NET: Registered protocol family 2 >IP: routing cache hash table of 8192 buckets, 64Kbytes >TCP established hash table entries: 262144 (order: 9, 2097152 bytes) >TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >NET: Registered protocol family 1 >NET: Registered protocol family 17 >powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e) >powernow-k8: BIOS error - no PSB >ACPI wakeup devices: >PCI0 PS2K PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB >ACPI: (supports S0 S1 S3 S4 S5) >BIOS EDD facility v0.16 2004-Jun-25, 2 devices found >md: Autodetecting RAID arrays. >md: autorun ... >md: considering sdb1 ... >md: adding sdb1 ... >md: adding sda1 ... >md: created md0 >md: bind >md: bind >md: running: >md0: setting max_sectors to 128, segment boundary to 32767 >raid0: looking at sdb1 >raid0: comparing sdb1(78148096) with sdb1(78148096) >raid0: END >raid0: ==> UNIQUE >raid0: 1 zones >raid0: looking at sda1 >raid0: comparing sda1(78148096) with sdb1(78148096) >raid0: EQUAL >raid0: FINAL 1 zones >raid0: done. >raid0 : md_size is 156296192 blocks. >raid0 : conf->hash_spacing is 156296192 blocks. >raid0 : nb_zone is 1. >raid0 : Allocating 8 bytes for hash. >md: ... autorun DONE. >ReiserFS: hda2: found reiserfs format "3.6" with standard journal >ReiserFS: hda2: using ordered data mode >ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: hda2: checking transaction log (hda2) >ReiserFS: hda2: Using r5 hash to sort names >VFS: Mounted root (reiserfs filesystem) readonly. >Freeing unused kernel memory: 172k freed >Adding 977216k swap on /dev/hda1. Priority:-1 extents:1 >ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185 >PCI: Setting latency timer of device 0000:00:11.5 to 64 >codec_read: codec 0 is not valid [0xfe0000] >codec_read: codec 0 is not valid [0xfe0000] >codec_read: codec 0 is not valid [0xfe0000] >codec_read: codec 0 is not valid [0xfe0000] >cdc_acm 2-2:1.0: ttyACM0: USB ACM device >usbcore: registered new driver cdc_acm >drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters >CSLIP: code copyright 1989 Regents of the University of California >PPP generic driver version 2.4.2 >PPP BSD Compression module registered >PPP Deflate Compression module registered >fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. >[fglrx] Maximum main memory to use for locked dma buffers: 918 MBytes. >ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 >[fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0 >[fglrx] Internal AGP support requested, but kernel AGP support active. >[fglrx] Have to use kernel AGP support to avoid conflicts. >[fglrx] AGP detected, AgpState = 0x1f000a1a (hardware caps of chipset) >agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. >agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode >agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode >[fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps) >[fglrx] free AGP = 256126976 >[fglrx] max AGP = 256126976 >[fglrx] free LFB = 116387840 >[fglrx] max LFB = 116387840 >[fglrx] free Inv = 0 >[fglrx] max Inv = 0 >[fglrx] total Inv = 0 >[fglrx] total TIM = 0 >[fglrx] total FB = 0 >[fglrx] total AGP = 65536 >ReiserFS: hdb5: found reiserfs format "3.6" with standard journal >ReiserFS: hdb5: using ordered data mode >ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: hdb5: checking transaction log (hdb5) >ReiserFS: hdb5: Using r5 hash to sort names >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >usb 2-2: USB disconnect, address 2 >usb 2-2: new full speed USB device using uhci_hcd and address 3 >cdc_acm 2-2:1.0: ttyACM0: USB ACM device >Losing some ticks... checking if CPU frequency changed. >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >PPP: VJ decompression error >FAT: bogus number of reserved sectors >VFS: Can't find a valid FAT filesystem on dev md0. >ReiserFS: md0: found reiserfs format "3.6" with standard journal >Unable to handle kernel paging request at ffffc200002ec008 RIP: >[] >PGD 3ff12067 PUD 3ff11067 PMD 3f521067 PTE 0 >Oops: 0002 [1] PREEMPT >CPU 0 >Modules linked in: fglrx ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc w83627hf eeprom i2c_sensor i2c_isa snd_ioctl32 snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq cdc_acm i2c_viapro i2c_core snd_via82xx snd_mpu401_uart snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd siimage >Pid: 27434, comm: mount Tainted: P 2.6.11-gentoo-r9 >RIP: 0010:[] [] >RSP: 0018:ffff81002ecd5ac8 EFLAGS: 00010202 >RAX: ffff81000d5edd98 RBX: ffffc200002e9000 RCX: ffff81002ecd5a70 >RDX: ffff81000d5edd98 RSI: ffff81002ecd5a58 RDI: ffff810001dff6d0 >RBP: 0000000000003000 R08: ffff81002ecd4000 R09: 0000000000000001 >R10: 00000000ffffffff R11: ffffffff8035d100 R12: ffff81003d9bcc00 >R13: ffff810011991800 R14: 0000000000000300 R15: ffff81000359b000 >FS: 00002aaaaaff36d0(0000) GS:ffffffff805f5f40(0000) knlGS:0000000000000000 >CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b >CR2: ffffc200002ec008 CR3: 00000000080d8000 CR4: 00000000000006e0 >Process mount (pid: 27434, threadinfo ffff81002ecd4000, task ffff810031424130) >Stack: 0000000000000000 ffffffea00000003 ffff81000359b000 0000000000000001 > 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 0000000000000000 0000000000000000 >Call Trace:[] [] [] > [] [] [] > [] [] [] > [] [] [] > [] [] [] > [] [] > >Code: 48 89 44 1d 08 49 8b 84 24 50 02 00 00 48 8b 40 10 48 83 7c >RIP [] RSP >CR2: ffffc200002ec008 > > >