From: Monica Correa <mcorrea@inf.pucrs.br>
To: linux-ia64@vger.kernel.org
Subject: Console problem
Date: Fri, 10 Jun 2005 22:05:36 +0000 [thread overview]
Message-ID: <42AA0EB0.3070604@inf.pucrs.br> (raw)
[-- Attachment #1: Type: text/plain, Size: 14685 bytes --]
Hi,
I'm having some problems to boot the Linux kernel 2.6.11.11 on a HP
Superdome with 16 Itanium 2 processors and EFI version 1.1. After the
"Uncompressing Linux ... done" message appears, there is no more output
for the console. The boot doesn't stop (I'm sending part of the
/var/log/messages file attached to this email), but no more messages are
printed in the console and the "login" prompt is not shown. It seems to
be a console problem, but I'm not sure about how to fix it... When I
boot kernel 2.4 without the "console=" option, I have a similar
problem, no kernel output, but the "login" prompt is shown. For kernel
2.4 the problem is solved when I specify the "console=ttyS0" argument in
the boot process. However, the same doesn't happen for kernel 2.6. Even
if I specify "console=ttyS0", I have no kernel output and no "login"
prompt. I also tried "console=hcdp" but it also doesn't work. Has anyone
experienced a similar problem which could help me solving it?
Any suggestion is welcome!
Thanks in advance,
Monica
Jun 10 11:47:56 localhost syslogd 1.4.1#17: restart.
Jun 10 11:47:56 localhost kernel: klogd 1.4.1#17, log source =
/proc/kmsg started.
Jun 10 11:47:56 localhost kernel: Cannot find map file.
Jun 10 11:47:56 localhost kernel: No module symbols loaded - kernel
modules not enabled.
Jun 10 11:47:56 localhost kernel: Linux version 2.6.11.11
(root@brpoaolympiaa1) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #13 SMP
Fri Jun 10 11:44:06 BRT 2005
Jun 10 11:47:56 localhost kernel: EFI v1.10 by HP:
SALsystab=0x720ff7d4408 ACPI 2.0=0x720ffba0000 HCDP=0x720ffbc8508
SMBIOS=0x7fffe000
Jun 10 11:47:56 localhost kernel: booting generic kernel on platform hpzx1
Jun 10 11:47:56 localhost kernel: PCDP: v3 at 0x720ffbc8508
Jun 10 11:47:56 localhost kernel: Number of logical nodes in system = 4
Jun 10 11:47:56 localhost kernel: Number of memory chunks in system = 5
Jun 10 11:47:56 localhost kernel: efi.trim_top: ignoring 12288KB of
memory at 0x72000000000 due to granule hole at 0x720fe000000
Jun 10 11:47:56 localhost kernel: warning: skipping physical page 0
Jun 10 11:47:56 localhost last message repeated 2 times
Jun 10 11:47:56 localhost kernel: SAL 3.2: HP Orca/IPF version 3.54
Jun 10 11:47:56 localhost kernel: SAL Platform features: None
Jun 10 11:47:56 localhost kernel: SAL: AP wakeup using external
interrupt vector 0xff
Jun 10 11:47:56 localhost kernel: ACPI: Local APIC address c0000000fee00000
Jun 10 11:47:56 localhost kernel: GSI 16 (level, low) -> CPU 0 (0x0001)
vector 48
Jun 10 11:47:56 localhost kernel: 10 CPUs available, 12 CPUs total
Jun 10 11:47:56 localhost kernel: MCA related initialization done
Jun 10 11:47:56 localhost kernel: warning: skipping physical page 0
Jun 10 11:47:56 localhost kernel: Virtual mem_map starts at
0xa0007ff98b20c000
Jun 10 11:47:56 localhost kernel: Built 4 zonelists
Jun 10 11:47:56 localhost kernel: Kernel command line:
BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinuz2.6.11.11.gz root=/dev/sda2 ro
console=hcdp
Jun 10 11:47:56 localhost kernel: PID hash table entries: 4096 (order:
12, 131072 bytes)
Jun 10 11:47:56 localhost kernel: Console: colour dummy device 80x25
Jun 10 11:47:56 localhost kernel: Memory: 12458688k/12507760k available
(4961k code, 56480k reserved, 2482k data, 352k init)
Jun 10 11:47:56 localhost kernel: McKinley Errata 9 workaround not
needed; disabling it
Jun 10 11:47:56 localhost kernel: Dentry cache hash table entries:
2097152 (order: 10, 16777216 bytes)
Jun 10 11:47:56 localhost kernel: Inode-cache hash table entries:
1048576 (order: 9, 8388608 bytes)
Jun 10 11:47:56 localhost kernel: Mount-cache hash table entries: 1024
(order: 0, 16384 bytes)
Jun 10 11:47:56 localhost kernel: Boot processor id 0x0/0x1
Jun 10 11:47:56 localhost kernel: task migration cache decay timeout: 10
msecs.
Jun 10 11:47:56 localhost kernel: CPU 1: synchronized ITC with CPU 0
(last diff 6 cycles, maxerr 442 cycles)
Jun 10 11:47:56 localhost kernel: CPU 2: synchronized ITC with CPU 0
(last diff -2 cycles, maxerr 2281 cycles)
Jun 10 11:47:56 localhost kernel: CPU 3: synchronized ITC with CPU 0
(last diff -2 cycles, maxerr 2276 cycles)
Jun 10 11:47:56 localhost kernel: CPU 4: synchronized ITC with CPU 0
(last diff 3 cycles, maxerr 1776 cycles)
Jun 10 11:47:56 localhost kernel: CPU 5: synchronized ITC with CPU 0
(last diff -2 cycles, maxerr 1776 cycles)
Jun 10 11:47:56 localhost kernel: CPU 6: synchronized ITC with CPU 0
(last diff -2 cycles, maxerr 2276 cycles)
Jun 10 11:47:56 localhost kernel: CPU 7: synchronized ITC with CPU 0
(last diff 2 cycles, maxerr 2274 cycles)
Jun 10 11:47:56 localhost kernel: CPU 8: synchronized ITC with CPU 0
(last diff 0 cycles, maxerr 2271 cycles)
Jun 10 11:47:56 localhost kernel: CPU 9: synchronized ITC with CPU 0
(last diff 0 cycles, maxerr 2281 cycles)
Jun 10 11:47:56 localhost kernel: Brought up 10 CPUs
Jun 10 11:47:56 localhost kernel: Total of 10 processors activated
(13467.04 BogoMIPS).
Jun 10 11:47:56 localhost kernel: NET: Registered protocol family 16
Jun 10 11:47:56 localhost kernel: ACPI: Subsystem revision 20050211
Jun 10 11:47:56 localhost kernel: ACPI: Interpreter enabled
Jun 10 11:47:56 localhost kernel: ACPI: Using IOSAPIC for interrupt routing
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L000] (00:00)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L001] (00:1c)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L002] (00:38)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L004] (00:54)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L006] (00:70)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L008] (00:8c)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L010] (00:a9)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L012] (00:c6)
Jun 10 11:47:56 localhost kernel: ACPI: PCI Root Bridge [L014] (00:e3)
Jun 10 11:47:56 localhost kernel: SCSI subsystem initialized
Jun 10 11:47:56 localhost kernel: PCI: Using ACPI for IRQ routing
Jun 10 11:47:56 localhost kernel: ** PCI interrupts are no longer routed
automatically. If this
Jun 10 11:47:56 localhost kernel: ** causes a device to stop working, it
is probably because the
Jun 10 11:47:56 localhost kernel: ** driver failed to call
pci_enable_device(). As a temporary
Jun 10 11:47:56 localhost kernel: ** workaround, the "pci=routeirq"
argument restores the old
Jun 10 11:47:56 localhost kernel: ** behavior. If this argument makes
the device work again,
Jun 10 11:47:56 localhost kernel: ** please email the output of "lspci"
to bjorn.helgaas@hp.com
Jun 10 11:47:56 localhost kernel: ** so I can fix the driver.
Jun 10 11:47:56 localhost kernel: IOC: sx1000 0.1 HPA 0xf8120002000 IOVA
space 1024Mb at 0x80000000
Jun 10 11:47:56 localhost kernel: IOC: sx1000 0.1 HPA 0xf8120003000 IOVA
space 1024Mb at 0x80000000
Jun 10 11:47:56 localhost kernel: perfmon: version 2.0 IRQ 238
Jun 10 11:47:56 localhost kernel: perfmon: Itanium 2 PMU detected, 16
PMCs, 18 PMDs, 4 counters (47 bits)
Jun 10 11:47:56 localhost kernel: PAL Information Facility v0.5
Jun 10 11:47:56 localhost kernel: perfmon: added sampling format
default_format
Jun 10 11:47:56 localhost kernel: perfmon_default_smpl: default_format
v2.0 registered
Jun 10 11:47:56 localhost kernel: Total HugeTLB memory allocated, 0
Jun 10 11:47:56 localhost kernel: VFS: Disk quotas dquot_6.5.1
Jun 10 11:47:56 localhost kernel: Dquot-cache hash table entries: 2048
(order 0, 16384 bytes)
Jun 10 11:47:56 localhost kernel: devfs: 2004-01-31 Richard Gooch
(rgooch@atnf.csiro.au)
Jun 10 11:47:56 localhost kernel: devfs: boot_options: 0x0
Jun 10 11:47:56 localhost kernel: Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
Jun 10 11:47:56 localhost kernel: Initializing Cryptographic API
Jun 10 11:47:56 localhost kernel: EFI Time Services Driver v0.4
Jun 10 11:47:56 localhost kernel: io scheduler noop registered
Jun 10 11:47:56 localhost kernel: io scheduler anticipatory registered
Jun 10 11:47:56 localhost kernel: io scheduler deadline registered
Jun 10 11:47:56 localhost kernel: io scheduler cfq registered
Jun 10 11:47:56 localhost kernel: RAMDISK driver initialized: 16 RAM
disks of 16384K size 1024 blocksize
Jun 10 11:47:56 localhost kernel: GSI 24 (level, low) -> CPU 1 (0x0401)
vector 49
Jun 10 11:47:56 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] ->
GSI 24 (level, low) -> IRQ 49
Jun 10 11:47:56 localhost kernel: sym0: <1010-66> rev 0x1 at pci
0000:00:02.0 irq 49
Jun 10 11:47:56 localhost kernel: sym0: Symbios NVRAM, ID 7, Fast-80,
SE, parity checking
Jun 10 11:47:56 localhost kernel: sym0: open drain IRQ line driver,
using on-chip SRAM
Jun 10 11:47:56 localhost kernel: sym0: using LOAD/STORE-based firmware.
Jun 10 11:47:56 localhost kernel: sym0: handling phase mismatch from
SCRIPTS.
Jun 10 11:47:56 localhost kernel: sym0: SCSI BUS has been reset.
Jun 10 11:47:56 localhost kernel: scsi0 : sym-2.1.18n
Jun 10 11:47:56 localhost kernel: Vendor: HP 36.4G Model:
MAS3367NC Rev: HPC3
Jun 10 11:47:56 localhost kernel: Type:
Direct-Access ANSI SCSI revision: 03
Jun 10 11:47:56 localhost kernel: sym0:6:0: tagged command queuing
enabled, command queue depth 16.
Jun 10 11:47:56 localhost kernel: target0:0:6: Beginning Domain Validation
Jun 10 11:47:56 localhost kernel: sym0:6: wide asynchronous.
Jun 10 11:47:56 localhost kernel: sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST
(50.0 ns, offset 31)
Jun 10 11:47:56 localhost kernel: target0:0:6: Ending Domain Validation
Jun 10 11:47:56 localhost kernel: GSI 25 (level, low) -> CPU 2 (0x0801)
vector 50
Jun 10 11:47:56 localhost kernel: ACPI: PCI interrupt 0000:00:02.1[B] ->
GSI 25 (level, low) -> IRQ 50
Jun 10 11:47:56 localhost kernel: sym1: <1010-66> rev 0x1 at pci
0000:00:02.1 irq 50
Jun 10 11:47:56 localhost kernel: sym1: Symbios NVRAM, ID 7, Fast-80,
SE, parity checking
Jun 10 11:47:56 localhost kernel: sym1: open drain IRQ line driver,
using on-chip SRAM
Jun 10 11:47:56 localhost kernel: sym1: using LOAD/STORE-based firmware.
Jun 10 11:47:56 localhost kernel: sym1: handling phase mismatch from
SCRIPTS.
Jun 10 11:47:56 localhost kernel: sym1: SCSI BUS has been reset.
Jun 10 11:47:56 localhost kernel: scsi1 : sym-2.1.18n
Jun 10 11:47:56 localhost kernel: Vendor: HP Model: DVD-ROM
305 Rev: 1.01
Jun 10 11:47:56 localhost kernel: Type:
CD-ROM ANSI SCSI revision: 02
Jun 10 11:47:56 localhost kernel: target1:0:2: Beginning Domain Validation
Jun 10 11:47:56 localhost kernel: target1:0:2: Domain Validation
skipping write tests
Jun 10 11:47:56 localhost kernel: sym1:2: FAST-20 SCSI 20.0 MB/s ST
(50.0 ns, offset 16)
Jun 10 11:47:56 localhost kernel: target1:0:2: Ending Domain Validation
Jun 10 11:47:56 localhost kernel: GSI 26 (level, low) -> CPU 3 (0x0c01)
vector 51
Jun 10 11:47:56 localhost kernel: ACPI: PCI interrupt 0000:00:03.0[A] ->
GSI 26 (level, low) -> IRQ 51
Jun 10 11:47:56 localhost kernel: sym2: <1010-66> rev 0x1 at pci
0000:00:03.0 irq 51
Jun 10 11:47:56 localhost kernel: sym2: Symbios NVRAM, ID 7, Fast-80,
SE, parity checking
Jun 10 11:47:56 localhost kernel: sym2: open drain IRQ line driver,
using on-chip SRAM
Jun 10 11:47:56 localhost kernel: sym2: using LOAD/STORE-based firmware.
Jun 10 11:47:56 localhost kernel: sym2: handling phase mismatch from
SCRIPTS.
Jun 10 11:47:56 localhost kernel: sym2: SCSI BUS has been reset.
Jun 10 11:47:56 localhost kernel: scsi2 : sym-2.1.18n
Jun 10 11:47:56 localhost kernel: GSI 27 (level, low) -> CPU 0 (0x0001)
vector 52
Jun 10 11:47:56 localhost kernel: ACPI: PCI interrupt 0000:00:03.1[B] ->
GSI 27 (level, low) -> IRQ 52
Jun 10 11:47:56 localhost kernel: sym3: <1010-66> rev 0x1 at pci
0000:00:03.1 irq 52
Jun 10 11:47:56 localhost kernel: sym3: Symbios NVRAM, ID 7, Fast-80,
LVD, parity checking
Jun 10 11:47:56 localhost kernel: sym3: open drain IRQ line driver,
using on-chip SRAM
Jun 10 11:47:56 localhost kernel: sym3: using LOAD/STORE-based firmware.
Jun 10 11:47:56 localhost kernel: sym3: handling phase mismatch from
SCRIPTS.
Jun 10 11:47:56 localhost kernel: sym3: SCSI BUS has been reset.
Jun 10 11:47:56 localhost kernel: scsi3 : sym-2.1.18n
Jun 10 11:47:56 localhost kernel: SCSI device sda: 71132960 512-byte
hdwr sectors (36420 MB)
Jun 10 11:47:56 localhost kernel: SCSI device sda: drive cache: write
through
Jun 10 11:47:56 localhost kernel: SCSI device sda: 71132960 512-byte
hdwr sectors (36420 MB)
Jun 10 11:47:56 localhost kernel: SCSI device sda: drive cache: write
through
Jun 10 11:47:56 localhost kernel: /dev/scsi/host0/bus0/target6/lun0: p1
p2 p3
Jun 10 11:47:56 localhost kernel: Attached scsi disk sda at scsi0,
channel 0, id 6, lun 0
Jun 10 11:47:56 localhost kernel: mice: PS/2 mouse device common for all
mice
Jun 10 11:47:56 localhost kernel: md: raid5 personality registered as nr 4
Jun 10 11:47:56 localhost kernel: raid5: measuring checksumming speed
Jun 10 11:47:56 localhost kernel: ia64 : 2064.384 MB/sec
Jun 10 11:47:56 localhost kernel: raid5: using function: ia64 (2064.384
MB/sec)
Jun 10 11:47:56 localhost kernel: md: md driver 0.90.1 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Jun 10 11:47:56 localhost kernel: EFI Variables Facility v0.08 2004-May-17
Jun 10 11:47:56 localhost kernel: NET: Registered protocol family 2
Jun 10 11:47:56 localhost kernel: IP: routing cache hash table of 262144
buckets, 4096Kbytes
Jun 10 11:47:56 localhost kernel: TCP established hash table entries:
8388608 (order: 13, 134217728 bytes)
Jun 10 11:47:56 localhost kernel: TCP bind hash table entries: 65536
(order: 6, 1048576 bytes)
Jun 10 11:47:56 localhost kernel: TCP: Hash tables configured
(established 8388608 bind 65536)
Jun 10 11:47:56 localhost kernel: NET: Registered protocol family 1
Jun 10 11:47:56 localhost kernel: NET: Registered protocol family 17
Jun 10 11:47:56 localhost kernel: devfs_mk_dev: could not append to
parent for md/0
Jun 10 11:47:56 localhost kernel: md: Autodetecting RAID arrays.
Jun 10 11:47:56 localhost kernel: md: autorun ...
Jun 10 11:47:56 localhost kernel: md: ... autorun DONE.
Jun 10 11:47:56 localhost kernel: EXT2-fs warning (device sda2):
ext2_fill_super: mounting ext3 filesystem as ext2
Jun 10 11:47:56 localhost kernel:
Jun 10 11:47:56 localhost kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Jun 10 11:47:56 localhost kernel: Freeing unused kernel memory: 352kB freed
Jun 10 11:47:56 localhost kernel: Warning: unable to open an initial
console.
Jun 10 11:47:56 localhost kernel: Adding 1473632k swap on /dev/sda3.
Priority:-1 extents:1
Jun 10 11:47:58 localhost lpd[3239]: restarted
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3182 bytes --]
next reply other threads:[~2005-06-10 22:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-10 22:05 Monica Correa [this message]
2005-06-10 22:25 ` Console problem Magenheimer, Dan (HP Labs Fort Collins)
-- strict thread matches above, loose matches on Subject: below --
2005-09-14 16:23 console problem Stas Sergeev
2005-09-15 6:39 ` UNIREA Sannicolau Mare
2005-09-28 2:24 ` Clarence Dang
2005-09-02 20:53 Alain
2005-08-31 5:23 UNIREA Sannicolau Mare
2005-08-31 22:06 ` Justin Zygmont
2005-09-01 10:45 ` UNIREA Sannicolau Mare
2005-09-02 3:05 ` Justin Zygmont
2005-09-05 5:19 ` UNIREA Sannicolau Mare
2005-09-05 23:19 ` Justin Zygmont
2005-09-14 5:12 ` UNIREA Sannicolau Mare
2005-09-02 10:54 ` Andrzej Kaczmarczyk
2005-08-06 5:45 Li, Xin B
2005-08-06 9:39 ` Keir Fraser
2005-08-06 18:47 ` Anthony Liguori
2005-08-05 5:43 Li, Xin B
2005-08-05 15:34 ` Li Ge
2005-08-05 16:34 ` Keir Fraser
2005-08-05 20:35 ` David F Barrera
2005-08-05 20:38 ` Anthony Liguori
2005-08-06 5:37 ` aq
2005-08-05 5:04 Li, Xin B
2005-08-05 5:40 ` Anthony Liguori
2005-08-05 3:48 Li, Xin B
2005-08-05 3:52 ` Anthony Liguori
2005-08-05 2:23 Stefan Berger
2005-08-05 2:30 ` Anthony Liguori
2005-08-05 3:14 ` Stefan Berger
[not found] <5.1.0.14.0.20020719083530.00a11d50@raven-villages.net>
[not found] ` <200207211506.57760.ADharankar@ATTBI.Com>
2002-07-23 19:13 ` Mark Chambers
2002-07-26 1:00 ` Arun Dharankar
2002-03-05 9:18 Console problem Andre.Messerschmidt
2002-03-05 19:29 ` James Simmons
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42AA0EB0.3070604@inf.pucrs.br \
--to=mcorrea@inf.pucrs.br \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.