* [PATCH] HP storage works support take 2
@ 2005-06-12 1:33 Mike Christie
2005-06-12 8:38 ` christophe varoqui
0 siblings, 1 reply; 3+ messages in thread
From: Mike Christie @ 2005-06-12 1:33 UTC (permalink / raw)
To: device-mapper development
This should fix some bugs.
diff -Naurp linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c linux-2.6.12-rc5/drivers/md/dm-hp-sw.c
--- linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.12-rc5/drivers/md/dm-hp-sw.c 2005-06-10 23:25:01.000000000 -0700
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2005 Mike Christie, All rights reserved.
+ *
+ * This file is released under the GPL.
+ *
+ * Basic, very basic, support for HP StorageWorks and FSC FibreCat
+ */
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "dm.h"
+#include "dm-hw-handler.h"
+
+struct hp_sw_handler {
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+static void hp_sw_endio(struct request *rq)
+{
+ struct path *path = rq->end_io_data;
+
+ /*
+ * TODO: something.. we have the sense and scsi bytes
+ */
+ if (rq->errors) {
+ DMINFO("hp_sw: START_STOP completed %d", rq->errors);
+ dm_pg_init_complete(path, MP_FAIL_PATH);
+ } else
+ dm_pg_init_complete(path, 0);
+
+ blk_put_request(rq);
+}
+
+static struct request *hp_sw_get_request(struct hp_sw_handler *h,
+ struct path *path)
+{
+ struct request *rq;
+ struct block_device *bdev = path->dev->bdev;
+ struct request_queue *q = bdev_get_queue(bdev);
+
+ rq = blk_get_request(q, READ, __GFP_WAIT);
+ if (!rq)
+ return NULL;
+
+ rq->end_io = hp_sw_endio;
+ rq->end_io_data = path;
+ rq->rq_disk = bdev->bd_contains->bd_disk;
+ rq->sense = h->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = 0;
+ /*
+ * TODO: make me configurable
+ */
+ rq->timeout = 30;
+ rq->flags |= (REQ_BLOCK_PC | REQ_FAILFAST | REQ_NOMERGE);
+
+ memset(&rq->cmd, 0, BLK_MAX_CDB);
+ rq->cmd[0] = START_STOP;
+ /* Start spin cycle */
+ rq->cmd[4] = 1;
+ rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
+
+ return rq;
+}
+
+static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
+ struct path *path)
+{
+ struct request *rq;
+ struct request_queue *q = bdev_get_queue(path->dev->bdev);
+
+ /*
+ * We can either blindly init the pg (then look at the sense),
+ * or we can send some commands to get the state here (then
+ * possibly send the fo cmnd), or we can also have the
+ * initial state passed into us and then get an update here.
+ */
+ if (!q) {
+ DMERR("hp_sw: no queue!");
+ goto fail_path;
+ }
+
+ if (blk_get_queue(q))
+ goto fail_path;
+
+ rq = hp_sw_get_request(hwh->context, path);
+ if (!rq) {
+ DMERR("hp_sw: could not allocate request for START_STOP");
+ goto rel_queue;
+ }
+
+ DMINFO("hp_sw: queueing START_STOP command");
+ elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1);
+ blk_put_queue(q);
+ return;
+
+rel_queue:
+ blk_put_queue(q);
+fail_path:
+ dm_pg_init_complete(path, MP_FAIL_PATH);
+}
+
+static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
+{
+ struct hp_sw_handler *h;
+
+ h = kmalloc(sizeof(*h), GFP_KERNEL);
+ if (!h) {
+ DMERR("hp_sw: could not allocate hw_handler");
+ return -ENOMEM;
+ }
+
+ hwh->context = h;
+ return 0;
+}
+
+static void hp_sw_destroy(struct hw_handler *hwh)
+{
+ struct hp_sw_handler *h = hwh->context;
+
+ kfree(h);
+ hwh->context = NULL;
+}
+
+static struct hw_handler_type hp_sw_hwh = {
+ .name = "hp_sw",
+ .module = THIS_MODULE,
+ .create = hp_sw_create,
+ .destroy = hp_sw_destroy,
+ .pg_init = hp_sw_pg_init,
+};
+
+static int __init hp_sw_init(void)
+{
+ int r;
+
+ r = dm_register_hw_handler(&hp_sw_hwh);
+ if (r < 0)
+ DMERR("hp_sw: register failed %d", r);
+
+ DMINFO("hp_sw version 0.1 loaded");
+
+ return r;
+}
+
+static void __exit hp_sw_exit(void)
+{
+ int r;
+
+ r = dm_unregister_hw_handler(&hp_sw_hwh);
+ if (r < 0)
+ DMERR("hp_sw: unregister failed %d", r);
+}
+
+module_init(hp_sw_init);
+module_exit(hp_sw_exit);
+
+MODULE_DESCRIPTION("HP StorageWorks and FSC FibreCat support for dm-multipath");
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
+MODULE_LICENSE("GPL");
diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Kconfig linux-2.6.12-rc5/drivers/md/Kconfig
--- linux-2.6.12-rc5.orig/drivers/md/Kconfig 2005-06-08 19:30:05.000000000 -0700
+++ linux-2.6.12-rc5/drivers/md/Kconfig 2005-06-10 23:23:31.000000000 -0700
@@ -236,5 +236,14 @@ config DM_MULTIPATH_EMC
---help---
Multipath support for EMC CX/AX series hardware.
+config DM_MULTIPATH_HP_SW
+ tristate "HP StorageWorks and FSC FibreCat (EXPERIMENTAL)"
+ depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
+ ---help---
+ Multipath support for HP StorageWorks and FSC FibreCat.
+ This was created with no knowledge of the HW other than
+ that it uses a START_STOP command for failover so it
+ is marked EXPERIMENTAL.
+
endmenu
diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Makefile linux-2.6.12-rc5/drivers/md/Makefile
--- linux-2.6.12-rc5.orig/drivers/md/Makefile 2005-06-08 19:30:05.000000000 -0700
+++ linux-2.6.12-rc5/drivers/md/Makefile 2005-06-10 23:23:31.000000000 -0700
@@ -33,6 +33,7 @@ obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o
+obj-$(CONFIG_DM_MULTIPATH_HP_SW) += dm-hp-sw.o
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] HP storage works support take 2
2005-06-12 1:33 [PATCH] HP storage works support take 2 Mike Christie
@ 2005-06-12 8:38 ` christophe varoqui
2005-06-12 19:56 ` Mike Christie
0 siblings, 1 reply; 3+ messages in thread
From: christophe varoqui @ 2005-06-12 8:38 UTC (permalink / raw)
To: device-mapper development
I told you I tried this simple fix, without success.
It is not enough, as it still hangs the kernel upon first io submited to
the map.
I verified this even without any hardware, with ram disks.
Here is a sample table :
[root@s64p17bibrn mce-dm-sstart]# dmsetup table toto: 0 1000 multipath 1
queue_if_no_path 1 hp_sw 2 1 round-robin 0 1 1 1:2 1000 round-robin 0 1
1 1:2 1000
[root@s64p17bibrn mce-dm-sstart]# dd if=/dev/mapper/toto of=/dev/null
bs=512 count=1
<HANG>
Regards,
cvaroqui
On sam, 2005-06-11 at 18:33 -0700, Mike Christie wrote:
> This should fix some bugs.
>
>
>
> diff -Naurp linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c linux-2.6.12-rc5/drivers/md/dm-hp-sw.c
> --- linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c 1969-12-31 16:00:00.000000000 -0800
> +++ linux-2.6.12-rc5/drivers/md/dm-hp-sw.c 2005-06-10 23:25:01.000000000 -0700
> @@ -0,0 +1,160 @@
> +/*
> + * Copyright (C) 2005 Mike Christie, All rights reserved.
> + *
> + * This file is released under the GPL.
> + *
> + * Basic, very basic, support for HP StorageWorks and FSC FibreCat
> + */
> +#include <scsi/scsi.h>
> +#include <scsi/scsi_cmnd.h>
> +
> +#include "dm.h"
> +#include "dm-hw-handler.h"
> +
> +struct hp_sw_handler {
> + unsigned char sense[SCSI_SENSE_BUFFERSIZE];
> +};
> +
> +static void hp_sw_endio(struct request *rq)
> +{
> + struct path *path = rq->end_io_data;
> +
> + /*
> + * TODO: something.. we have the sense and scsi bytes
> + */
> + if (rq->errors) {
> + DMINFO("hp_sw: START_STOP completed %d", rq->errors);
> + dm_pg_init_complete(path, MP_FAIL_PATH);
> + } else
> + dm_pg_init_complete(path, 0);
> +
> + blk_put_request(rq);
> +}
> +
> +static struct request *hp_sw_get_request(struct hp_sw_handler *h,
> + struct path *path)
> +{
> + struct request *rq;
> + struct block_device *bdev = path->dev->bdev;
> + struct request_queue *q = bdev_get_queue(bdev);
> +
> + rq = blk_get_request(q, READ, __GFP_WAIT);
> + if (!rq)
> + return NULL;
> +
> + rq->end_io = hp_sw_endio;
> + rq->end_io_data = path;
> + rq->rq_disk = bdev->bd_contains->bd_disk;
> + rq->sense = h->sense;
> + memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
> + rq->sense_len = 0;
> + /*
> + * TODO: make me configurable
> + */
> + rq->timeout = 30;
> + rq->flags |= (REQ_BLOCK_PC | REQ_FAILFAST | REQ_NOMERGE);
> +
> + memset(&rq->cmd, 0, BLK_MAX_CDB);
> + rq->cmd[0] = START_STOP;
> + /* Start spin cycle */
> + rq->cmd[4] = 1;
> + rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
> +
> + return rq;
> +}
> +
> +static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
> + struct path *path)
> +{
> + struct request *rq;
> + struct request_queue *q = bdev_get_queue(path->dev->bdev);
> +
> + /*
> + * We can either blindly init the pg (then look at the sense),
> + * or we can send some commands to get the state here (then
> + * possibly send the fo cmnd), or we can also have the
> + * initial state passed into us and then get an update here.
> + */
> + if (!q) {
> + DMERR("hp_sw: no queue!");
> + goto fail_path;
> + }
> +
> + if (blk_get_queue(q))
> + goto fail_path;
> +
> + rq = hp_sw_get_request(hwh->context, path);
> + if (!rq) {
> + DMERR("hp_sw: could not allocate request for START_STOP");
> + goto rel_queue;
> + }
> +
> + DMINFO("hp_sw: queueing START_STOP command");
> + elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1);
> + blk_put_queue(q);
> + return;
> +
> +rel_queue:
> + blk_put_queue(q);
> +fail_path:
> + dm_pg_init_complete(path, MP_FAIL_PATH);
> +}
> +
> +static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
> +{
> + struct hp_sw_handler *h;
> +
> + h = kmalloc(sizeof(*h), GFP_KERNEL);
> + if (!h) {
> + DMERR("hp_sw: could not allocate hw_handler");
> + return -ENOMEM;
> + }
> +
> + hwh->context = h;
> + return 0;
> +}
> +
> +static void hp_sw_destroy(struct hw_handler *hwh)
> +{
> + struct hp_sw_handler *h = hwh->context;
> +
> + kfree(h);
> + hwh->context = NULL;
> +}
> +
> +static struct hw_handler_type hp_sw_hwh = {
> + .name = "hp_sw",
> + .module = THIS_MODULE,
> + .create = hp_sw_create,
> + .destroy = hp_sw_destroy,
> + .pg_init = hp_sw_pg_init,
> +};
> +
> +static int __init hp_sw_init(void)
> +{
> + int r;
> +
> + r = dm_register_hw_handler(&hp_sw_hwh);
> + if (r < 0)
> + DMERR("hp_sw: register failed %d", r);
> +
> + DMINFO("hp_sw version 0.1 loaded");
> +
> + return r;
> +}
> +
> +static void __exit hp_sw_exit(void)
> +{
> + int r;
> +
> + r = dm_unregister_hw_handler(&hp_sw_hwh);
> + if (r < 0)
> + DMERR("hp_sw: unregister failed %d", r);
> +}
> +
> +module_init(hp_sw_init);
> +module_exit(hp_sw_exit);
> +
> +MODULE_DESCRIPTION("HP StorageWorks and FSC FibreCat support for dm-multipath");
> +MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
> +MODULE_LICENSE("GPL");
> diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Kconfig linux-2.6.12-rc5/drivers/md/Kconfig
> --- linux-2.6.12-rc5.orig/drivers/md/Kconfig 2005-06-08 19:30:05.000000000 -0700
> +++ linux-2.6.12-rc5/drivers/md/Kconfig 2005-06-10 23:23:31.000000000 -0700
> @@ -236,5 +236,14 @@ config DM_MULTIPATH_EMC
> ---help---
> Multipath support for EMC CX/AX series hardware.
>
> +config DM_MULTIPATH_HP_SW
> + tristate "HP StorageWorks and FSC FibreCat (EXPERIMENTAL)"
> + depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
> + ---help---
> + Multipath support for HP StorageWorks and FSC FibreCat.
> + This was created with no knowledge of the HW other than
> + that it uses a START_STOP command for failover so it
> + is marked EXPERIMENTAL.
> +
> endmenu
>
> diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Makefile linux-2.6.12-rc5/drivers/md/Makefile
> --- linux-2.6.12-rc5.orig/drivers/md/Makefile 2005-06-08 19:30:05.000000000 -0700
> +++ linux-2.6.12-rc5/drivers/md/Makefile 2005-06-10 23:23:31.000000000 -0700
> @@ -33,6 +33,7 @@ obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
> obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
> obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
> obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o
> +obj-$(CONFIG_DM_MULTIPATH_HP_SW) += dm-hp-sw.o
> obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
> obj-$(CONFIG_DM_MIRROR) += dm-mirror.o
> obj-$(CONFIG_DM_ZERO) += dm-zero.o
>
>
> --
> dm-devel mailing list
> dm-devel@redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
--
christophe varoqui <christophe.varoqui@free.fr>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] HP storage works support take 2
2005-06-12 8:38 ` christophe varoqui
@ 2005-06-12 19:56 ` Mike Christie
0 siblings, 0 replies; 3+ messages in thread
From: Mike Christie @ 2005-06-12 19:56 UTC (permalink / raw)
To: device-mapper development
christophe varoqui wrote:
> I told you I tried this simple fix, without success.
That fix is necessary. If the context does not get set then we will hit
a null pointer reference like in your oops you reported.
In the mail you sent you said it hung on module load. I verified that
and it worked here.
>
> It is not enough, as it still hangs the kernel upon first io submited to
> the map.
>
this is news to me. I will test out your table when I get a chance.
> I verified this even without any hardware, with ram disks.
> Here is a sample table :
>
> [root@s64p17bibrn mce-dm-sstart]# dmsetup table toto: 0 1000 multipath 1
> queue_if_no_path 1 hp_sw 2 1 round-robin 0 1 1 1:2 1000 round-robin 0 1
> 1 1:2 1000
> [root@s64p17bibrn mce-dm-sstart]# dd if=/dev/mapper/toto of=/dev/null
> bs=512 count=1
>
> <HANG>
>
> Regards,
> cvaroqui
>
> On sam, 2005-06-11 at 18:33 -0700, Mike Christie wrote:
>
>>This should fix some bugs.
>>
>>
>>
>>diff -Naurp linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c linux-2.6.12-rc5/drivers/md/dm-hp-sw.c
>>--- linux-2.6.12-rc5.orig/drivers/md/dm-hp-sw.c 1969-12-31 16:00:00.000000000 -0800
>>+++ linux-2.6.12-rc5/drivers/md/dm-hp-sw.c 2005-06-10 23:25:01.000000000 -0700
>>@@ -0,0 +1,160 @@
>>+/*
>>+ * Copyright (C) 2005 Mike Christie, All rights reserved.
>>+ *
>>+ * This file is released under the GPL.
>>+ *
>>+ * Basic, very basic, support for HP StorageWorks and FSC FibreCat
>>+ */
>>+#include <scsi/scsi.h>
>>+#include <scsi/scsi_cmnd.h>
>>+
>>+#include "dm.h"
>>+#include "dm-hw-handler.h"
>>+
>>+struct hp_sw_handler {
>>+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
>>+};
>>+
>>+static void hp_sw_endio(struct request *rq)
>>+{
>>+ struct path *path = rq->end_io_data;
>>+
>>+ /*
>>+ * TODO: something.. we have the sense and scsi bytes
>>+ */
>>+ if (rq->errors) {
>>+ DMINFO("hp_sw: START_STOP completed %d", rq->errors);
>>+ dm_pg_init_complete(path, MP_FAIL_PATH);
>>+ } else
>>+ dm_pg_init_complete(path, 0);
>>+
>>+ blk_put_request(rq);
>>+}
>>+
>>+static struct request *hp_sw_get_request(struct hp_sw_handler *h,
>>+ struct path *path)
>>+{
>>+ struct request *rq;
>>+ struct block_device *bdev = path->dev->bdev;
>>+ struct request_queue *q = bdev_get_queue(bdev);
>>+
>>+ rq = blk_get_request(q, READ, __GFP_WAIT);
>>+ if (!rq)
>>+ return NULL;
>>+
>>+ rq->end_io = hp_sw_endio;
>>+ rq->end_io_data = path;
>>+ rq->rq_disk = bdev->bd_contains->bd_disk;
>>+ rq->sense = h->sense;
>>+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
>>+ rq->sense_len = 0;
>>+ /*
>>+ * TODO: make me configurable
>>+ */
>>+ rq->timeout = 30;
>>+ rq->flags |= (REQ_BLOCK_PC | REQ_FAILFAST | REQ_NOMERGE);
>>+
>>+ memset(&rq->cmd, 0, BLK_MAX_CDB);
>>+ rq->cmd[0] = START_STOP;
>>+ /* Start spin cycle */
>>+ rq->cmd[4] = 1;
>>+ rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
>>+
>>+ return rq;
>>+}
>>+
>>+static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
>>+ struct path *path)
>>+{
>>+ struct request *rq;
>>+ struct request_queue *q = bdev_get_queue(path->dev->bdev);
>>+
>>+ /*
>>+ * We can either blindly init the pg (then look at the sense),
>>+ * or we can send some commands to get the state here (then
>>+ * possibly send the fo cmnd), or we can also have the
>>+ * initial state passed into us and then get an update here.
>>+ */
>>+ if (!q) {
>>+ DMERR("hp_sw: no queue!");
>>+ goto fail_path;
>>+ }
>>+
>>+ if (blk_get_queue(q))
>>+ goto fail_path;
>>+
>>+ rq = hp_sw_get_request(hwh->context, path);
>>+ if (!rq) {
>>+ DMERR("hp_sw: could not allocate request for START_STOP");
>>+ goto rel_queue;
>>+ }
>>+
>>+ DMINFO("hp_sw: queueing START_STOP command");
>>+ elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1);
>>+ blk_put_queue(q);
>>+ return;
>>+
>>+rel_queue:
>>+ blk_put_queue(q);
>>+fail_path:
>>+ dm_pg_init_complete(path, MP_FAIL_PATH);
>>+}
>>+
>>+static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
>>+{
>>+ struct hp_sw_handler *h;
>>+
>>+ h = kmalloc(sizeof(*h), GFP_KERNEL);
>>+ if (!h) {
>>+ DMERR("hp_sw: could not allocate hw_handler");
>>+ return -ENOMEM;
>>+ }
>>+
>>+ hwh->context = h;
>>+ return 0;
>>+}
>>+
>>+static void hp_sw_destroy(struct hw_handler *hwh)
>>+{
>>+ struct hp_sw_handler *h = hwh->context;
>>+
>>+ kfree(h);
>>+ hwh->context = NULL;
>>+}
>>+
>>+static struct hw_handler_type hp_sw_hwh = {
>>+ .name = "hp_sw",
>>+ .module = THIS_MODULE,
>>+ .create = hp_sw_create,
>>+ .destroy = hp_sw_destroy,
>>+ .pg_init = hp_sw_pg_init,
>>+};
>>+
>>+static int __init hp_sw_init(void)
>>+{
>>+ int r;
>>+
>>+ r = dm_register_hw_handler(&hp_sw_hwh);
>>+ if (r < 0)
>>+ DMERR("hp_sw: register failed %d", r);
>>+
>>+ DMINFO("hp_sw version 0.1 loaded");
>>+
>>+ return r;
>>+}
>>+
>>+static void __exit hp_sw_exit(void)
>>+{
>>+ int r;
>>+
>>+ r = dm_unregister_hw_handler(&hp_sw_hwh);
>>+ if (r < 0)
>>+ DMERR("hp_sw: unregister failed %d", r);
>>+}
>>+
>>+module_init(hp_sw_init);
>>+module_exit(hp_sw_exit);
>>+
>>+MODULE_DESCRIPTION("HP StorageWorks and FSC FibreCat support for dm-multipath");
>>+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
>>+MODULE_LICENSE("GPL");
>>diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Kconfig linux-2.6.12-rc5/drivers/md/Kconfig
>>--- linux-2.6.12-rc5.orig/drivers/md/Kconfig 2005-06-08 19:30:05.000000000 -0700
>>+++ linux-2.6.12-rc5/drivers/md/Kconfig 2005-06-10 23:23:31.000000000 -0700
>>@@ -236,5 +236,14 @@ config DM_MULTIPATH_EMC
>> ---help---
>> Multipath support for EMC CX/AX series hardware.
>>
>>+config DM_MULTIPATH_HP_SW
>>+ tristate "HP StorageWorks and FSC FibreCat (EXPERIMENTAL)"
>>+ depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
>>+ ---help---
>>+ Multipath support for HP StorageWorks and FSC FibreCat.
>>+ This was created with no knowledge of the HW other than
>>+ that it uses a START_STOP command for failover so it
>>+ is marked EXPERIMENTAL.
>>+
>> endmenu
>>
>>diff -Naurp linux-2.6.12-rc5.orig/drivers/md/Makefile linux-2.6.12-rc5/drivers/md/Makefile
>>--- linux-2.6.12-rc5.orig/drivers/md/Makefile 2005-06-08 19:30:05.000000000 -0700
>>+++ linux-2.6.12-rc5/drivers/md/Makefile 2005-06-10 23:23:31.000000000 -0700
>>@@ -33,6 +33,7 @@ obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
>> obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
>> obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
>> obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o
>>+obj-$(CONFIG_DM_MULTIPATH_HP_SW) += dm-hp-sw.o
>> obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
>> obj-$(CONFIG_DM_MIRROR) += dm-mirror.o
>> obj-$(CONFIG_DM_ZERO) += dm-zero.o
>>
>>
>>--
>>dm-devel mailing list
>>dm-devel@redhat.com
>>https://www.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-06-12 19:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-12 1:33 [PATCH] HP storage works support take 2 Mike Christie
2005-06-12 8:38 ` christophe varoqui
2005-06-12 19:56 ` Mike Christie
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.