[LARTC] Is it possible to throw all not matched traffic to selected

[LARTC] Is it possible to throw all not matched traffic to selected

[Konrad]

I have some filters.. like this:
$TC filter add dev $dev_isp protocol ip parent 3:0 pref 3 u32 match ip 
protocol 6 0xff match ip sport $prt 0xffff flowid 3:2

I throw only few types of packets to 3:2, all other traffic I want to 
put on 3:3, but this doesn't work(!):
$TC filter add dev $dev_isp protocol ip parent 3:0 pref 4 flowid 3:2

When type that command I have this:
Unknown filter "flowid", hence option "3:3" is unparsable

What should I do to put all other traffic (not matched by my filters) to 
3:3?
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] Is it possible to throw all not matched traffic to

[Konrad]

> What should I do to put all other traffic (not matched by my filters) to 
> 3:3?

OK. I solved the problem.

I must use default here: tc qdisc add dev eth0 root handle 3:0 htb default 3

Is possible to do it using filters?
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] Is it possible to throw all not matched traffic

[Andreas Unterkircher]

Konrad wrote:

> Is possible to do it using filters?

I think, default class is the best solution. But you also can do it with
a last "match all" filter after your other filter rules.

tc filter add ...... protocol all u32 match u32 0 0 classid 3:3

Cheers,
Andreas
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] Is it possible to throw all not matched traffic

[gypsy]

Konrad wrote:
> 
> > What should I do to put all other traffic (not matched by my filters) to
> > 3:3?
> 
> OK. I solved the problem.
> 
> I must use default here: tc qdisc add dev eth0 root handle 3:0 htb default 3
> 
> Is possible to do it using filters?

Certainly!  You add a filter that directs what you want into the correct
flow, then you match everything else with a second filter, directing all
that to a different (what is now your default) flow.  See the INGRESS
portion of the Wonder Shaper if you don't know how to match everything. 
Use prio to determine the selection order of the filters if necessary. 
"If necessary" means that filters seldom need different prio values.

--
gypsy
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc