[LARTC] Traffic shaping on WAN(serial) device

[LARTC] Traffic shaping on WAN(serial) device

[Vanitha Ramaswami]

Hi,
In our product i am using the High Speed Serial driver as the WAN interface. 
I've implemented the HSS as  a serial driver and i am running PPP to 
connect to the internet. I have both Voice data + FTP data going thro the 
PPP session. Is it possible for me to use the Traffic shaper(wonder shaper) 
in my case/ Do i need to make the HSS driver to appear as a network device
inorder to run the traffic shaper

Would appreciate if you can give some pointers to start off.


Thanks,
Vanitha R


[This e-mail is confidential and may be priviledged. If you are not the
intended recipient, please kindly notify us immediately and delete the message
from your system; please do not copy or use it for any purpose, nor disclose
its contents to any other person. Thank you.]
---ST Electronics Group---

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] Traffic shaping on WAN(serial) device

[Andy Furniss]

Vanitha Ramaswami wrote:
> Hi,
> In our product i am using the High Speed Serial driver as the WAN interface. 
> I've implemented the HSS as  a serial driver and i am running PPP to 
> connect to the internet. I have both Voice data + FTP data going thro the 
> PPP session. Is it possible for me to use the Traffic shaper(wonder shaper) 
> in my case/ Do i need to make the HSS driver to appear as a network device
> inorder to run the traffic shaper

If you have ppp0 you should be able to shape on that OK.

Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc