From: Alexander Fieroch <fieroch@web.de>
To: unlisted-recipients:; (no To-header on input)
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
bzolnier@gmail.com,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
axboe@suse.de,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Subject: Re: [2.6.12rc4] PROBLEM: "drive appears confused" and "irq 18: nobody cared!"
Date: Mon, 20 Jun 2005 10:08:47 +0200 [thread overview]
Message-ID: <42B6798F.1060200@web.de> (raw)
In-Reply-To: <19D0D50E9B1D0A40A9F0323DBFA04ACCE04BFF@USRV-EXCH4.na.uis.unisys.com>
[-- Attachment #1: Type: text/plain, Size: 915 bytes --]
Protasevich, Natalie wrote:
> I would also recommend booting with pci=routeirq, this will show the
> pre-disposition of each GSI->IRQ pair, although sometimes it changes IRQ
> distribution, and you may get different error. Also try using apic=debug
> or acpi=verbose to see the IO-APIC lines setup.
I've booted kernel 2.6.12-git1 + iteraid.patch from Andrew with kernel
parameters pci=routeirq and apic=debug. You'll find the complete syslog
as attachment.
Hope, that helps you.
> For debug failed IRQs, I
> sometimes insert print_io_APIC() after each PCI device IRQ registration,
> to see it got edge or level triggered and other details.
> The other one that I saw causing problems especially for ISA devices is
> ACPI PnP (and still does, I'm researching a similar problem on ES7000),
> and in this case I get my system booted with pnpacpi=off.
I don't have any ISA devices on my board.
Regards,
Alexander
[-- Attachment #2: syslog2612git1iteraid --]
[-- Type: text/plain, Size: 51433 bytes --]
Jun 20 09:54:04 orclex syslog-ng[4228]: syslog-ng version 1.6.7 starting
Jun 20 09:54:04 orclex syslog-ng[4228]: Changing permissions on special file /dev/xconsole
Jun 20 09:54:04 orclex syslog-ng[4228]: Cannot open file /dev/xconsole for writing (No such file or directory)
Jun 20 09:54:04 orclex kernel: Bootdata ok (command line is root=/dev/sda3 vga=792 pci=routeirq apic=debug)
Jun 20 09:54:04 orclex kernel: Linux version 2.6.12-git1 (root@orclex) (gcc-Version 3.3.6 (Debian 1:3.3.6-5)) #2 SMP Mon Jun 20 09:49:05 CEST 2005
Jun 20 09:54:04 orclex kernel: BIOS-provided physical RAM map:
Jun 20 09:54:04 orclex kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Jun 20 09:54:04 orclex kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Jun 20 09:54:04 orclex kernel: ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fb070
Jun 20 09:54:04 orclex kernel: ACPI: XSDT (v001 A M I OEMXSDT 0x03000521 MSFT 0x00000097) @ 0x000000003ffb0100
Jun 20 09:54:04 orclex kernel: ACPI: FADT (v003 A M I OEMFACP 0x03000521 MSFT 0x00000097) @ 0x000000003ffb0290
Jun 20 09:54:04 orclex kernel: ACPI: MADT (v001 A M I OEMAPIC 0x03000521 MSFT 0x00000097) @ 0x000000003ffb0390
Jun 20 09:54:04 orclex kernel: ACPI: OEMB (v001 A M I AMI_OEM 0x03000521 MSFT 0x00000097) @ 0x000000003ffbe040
Jun 20 09:54:04 orclex kernel: ACPI: MCFG (v001 A M I OEMMCFG 0x03000521 MSFT 0x00000097) @ 0x000000003ffb6c60
Jun 20 09:54:04 orclex kernel: ACPI: DSDT (v001 A0086 A0086003 0x00000003 INTL 0x02002026) @ 0x0000000000000000
Jun 20 09:54:04 orclex kernel: On node 0 totalpages: 262064
Jun 20 09:54:04 orclex kernel: DMA zone: 4096 pages, LIFO batch:1
Jun 20 09:54:04 orclex kernel: Normal zone: 257968 pages, LIFO batch:31
Jun 20 09:54:04 orclex kernel: HighMem zone: 0 pages, LIFO batch:1
Jun 20 09:54:04 orclex kernel: ACPI: PM-Timer IO Port: 0x808
Jun 20 09:54:04 orclex kernel: ACPI: Local APIC address 0xfee00000
Jun 20 09:54:04 orclex kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jun 20 09:54:04 orclex kernel: Processor #0 15:4 APIC version 16
Jun 20 09:54:04 orclex kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jun 20 09:54:04 orclex kernel: Processor #1 15:4 APIC version 16
Jun 20 09:54:04 orclex kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jun 20 09:54:04 orclex kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 20 09:54:04 orclex kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 20 09:54:04 orclex kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 20 09:54:04 orclex kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 20 09:54:04 orclex kernel: ACPI: IRQ0 used by override.
Jun 20 09:54:04 orclex kernel: ACPI: IRQ2 used by override.
Jun 20 09:54:04 orclex kernel: ACPI: IRQ9 used by override.
Jun 20 09:54:04 orclex kernel: Setting APIC routing to flat
Jun 20 09:54:04 orclex kernel: Using ACPI (MADT) for SMP configuration information
Jun 20 09:54:04 orclex kernel: Allocating PCI resources starting at 40000000 (gap: 40000000:bfb00000)
Jun 20 09:54:04 orclex kernel: Built 1 zonelists
Jun 20 09:54:04 orclex kernel: Kernel command line: root=/dev/sda3 vga=792 pci=routeirq apic=debug
Jun 20 09:54:04 orclex kernel: Initializing CPU#0
Jun 20 09:54:04 orclex kernel: PID hash table entries: 4096 (order: 12, 131072 bytes)
Jun 20 09:54:04 orclex kernel: time.c: Using 3.579545 MHz PM timer.
Jun 20 09:54:04 orclex kernel: time.c: Detected 3010.804 MHz processor.
Jun 20 09:54:04 orclex kernel: Console: colour dummy device 80x25
Jun 20 09:54:04 orclex kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jun 20 09:54:04 orclex kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 20 09:54:04 orclex kernel: Memory: 1023836k/1048256k available (3317k kernel code, 23728k reserved, 1760k data, 228k init)
Jun 20 09:54:04 orclex kernel: Calibrating delay loop... 5947.39 BogoMIPS (lpj=2973696)
Jun 20 09:54:04 orclex kernel: Security Framework v1.0.0 initialized
Jun 20 09:54:04 orclex kernel: Capability LSM initialized
Jun 20 09:54:04 orclex kernel: Mount-cache hash table entries: 256
Jun 20 09:54:04 orclex kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jun 20 09:54:04 orclex kernel: CPU: L2 cache: 2048K
Jun 20 09:54:04 orclex kernel: using mwait in idle threads.
Jun 20 09:54:04 orclex kernel: CPU: Physical Processor ID: 0
Jun 20 09:54:04 orclex kernel: CPU0: Thermal monitoring enabled (TM1)
Jun 20 09:54:04 orclex kernel: enabled ExtINT on CPU#0
Jun 20 09:54:04 orclex kernel: ENABLING IO-APIC IRQs
Jun 20 09:54:04 orclex kernel: init IO_APIC IRQs
Jun 20 09:54:04 orclex kernel: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jun 20 09:54:04 orclex kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Jun 20 09:54:04 orclex kernel: Using local APIC timer interrupts.
Jun 20 09:54:04 orclex kernel: Detected 12.544 MHz APIC timer.
Jun 20 09:54:04 orclex kernel: Booting processor 1/1 rip 6000 rsp ffff810002191f58
Jun 20 09:54:04 orclex kernel: Initializing CPU#1
Jun 20 09:54:04 orclex kernel: masked ExtINT on CPU#1
Jun 20 09:54:04 orclex kernel: Calibrating delay loop... 6012.92 BogoMIPS (lpj=3006464)
Jun 20 09:54:04 orclex kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jun 20 09:54:04 orclex kernel: CPU: L2 cache: 2048K
Jun 20 09:54:04 orclex kernel: CPU: Physical Processor ID: 0
Jun 20 09:54:04 orclex kernel: CPU1: Thermal monitoring enabled (TM1)
Jun 20 09:54:04 orclex kernel: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Jun 20 09:54:04 orclex kernel: APIC error on CPU1: 00(40)
Jun 20 09:54:04 orclex kernel: CPU 1: Syncing TSC to CPU 0.
Jun 20 09:54:04 orclex kernel: Brought up 2 CPUs
Jun 20 09:54:04 orclex kernel: CPU 1: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 773 cycles)
Jun 20 09:54:04 orclex kernel: time.c: Using PIT/TSC based timekeeping.
Jun 20 09:54:04 orclex kernel: testing NMI watchdog ... OK.
Jun 20 09:54:04 orclex kernel: CPU0 attaching sched-domain:
Jun 20 09:54:04 orclex kernel: domain 0: span 03
Jun 20 09:54:04 orclex kernel: groups: 01 02
Jun 20 09:54:04 orclex kernel: domain 1: span 03
Jun 20 09:54:04 orclex kernel: groups: 03
Jun 20 09:54:04 orclex kernel: CPU1 attaching sched-domain:
Jun 20 09:54:04 orclex kernel: domain 0: span 03
Jun 20 09:54:04 orclex kernel: groups: 02 01
Jun 20 09:54:04 orclex kernel: domain 1: span 03
Jun 20 09:54:04 orclex kernel: groups: 03
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 16
Jun 20 09:54:04 orclex kernel: PCI: Using configuration type 1
Jun 20 09:54:04 orclex kernel: PCI: Using MMCONFIG at e0000000
Jun 20 09:54:04 orclex kernel: mtrr: v2.0 (20020519)
Jun 20 09:54:04 orclex kernel: ACPI: Subsystem revision 20050309
Jun 20 09:54:04 orclex kernel: ACPI: Interpreter enabled
Jun 20 09:54:04 orclex kernel: ACPI: Using IOAPIC for interrupt routing
Jun 20 09:54:04 orclex kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 20 09:54:04 orclex kernel: PCI: Probing PCI hardware (bus 00)
Jun 20 09:54:04 orclex kernel: Boot video device is 0000:04:00.0
Jun 20 09:54:04 orclex kernel: PCI: Transparent bridge - 0000:00:1e.0
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 20 09:54:04 orclex kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 20 09:54:04 orclex kernel: pnp: PnP ACPI init
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-6 -> 0x59 -> IRQ 6 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-7 -> 0x61 -> IRQ 7 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-10 -> 0x79 -> IRQ 10 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-4 -> 0x49 -> IRQ 4 Mode:0 Active:0)
Jun 20 09:54:04 orclex kernel: pnp: PnP ACPI: found 19 devices
Jun 20 09:54:04 orclex kernel: SCSI subsystem initialized
Jun 20 09:54:04 orclex kernel: usbcore: registered new driver usbfs
Jun 20 09:54:04 orclex kernel: usbcore: registered new driver hub
Jun 20 09:54:04 orclex kernel: PCI: Using ACPI for IRQ routing
Jun 20 09:54:04 orclex kernel: PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb9 -> IRQ 23 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 193
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 209
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:09.1[A] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 209
Jun 20 09:54:04 orclex kernel: number of MP IRQ sources: 17.
Jun 20 09:54:04 orclex kernel: number of IO-APIC #2 registers: 24.
Jun 20 09:54:04 orclex kernel: testing the IO APIC.......................
Jun 20 09:54:04 orclex kernel:
Jun 20 09:54:04 orclex kernel: IO APIC #2......
Jun 20 09:54:04 orclex kernel: .... register #00: 02000000
Jun 20 09:54:04 orclex kernel: ....... : physical APIC id: 02
Jun 20 09:54:04 orclex kernel: .... register #01: 00170020
Jun 20 09:54:04 orclex kernel: ....... : max redirection entries: 0017
Jun 20 09:54:04 orclex kernel: ....... : PRQ implemented: 0
Jun 20 09:54:04 orclex kernel: ....... : IO APIC version: 0020
Jun 20 09:54:04 orclex kernel: .... register #02: 00170020
Jun 20 09:54:04 orclex kernel: ....... : arbitration: 00
Jun 20 09:54:04 orclex kernel: .... IRQ redirection table:
Jun 20 09:54:04 orclex kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jun 20 09:54:04 orclex kernel: 00 000 00 1 0 0 0 0 0 0 00
Jun 20 09:54:04 orclex kernel: 01 003 03 1 0 0 0 0 1 1 39
Jun 20 09:54:04 orclex kernel: 02 003 03 0 0 0 0 0 1 1 31
Jun 20 09:54:04 orclex kernel: 03 003 03 0 0 0 0 0 1 1 41
Jun 20 09:54:04 orclex kernel: 04 003 03 1 0 0 0 0 1 1 49
Jun 20 09:54:04 orclex kernel: 05 003 03 0 0 0 0 0 1 1 51
Jun 20 09:54:04 orclex kernel: 06 003 03 1 0 0 0 0 1 1 59
Jun 20 09:54:04 orclex kernel: 07 003 03 1 0 0 0 0 1 1 61
Jun 20 09:54:04 orclex kernel: 08 003 03 1 0 0 0 0 1 1 69
Jun 20 09:54:04 orclex kernel: 09 003 03 0 1 0 0 0 1 1 71
Jun 20 09:54:04 orclex kernel: 0a 003 03 1 0 0 0 0 1 1 79
Jun 20 09:54:04 orclex kernel: 0b 003 03 0 0 0 0 0 1 1 81
Jun 20 09:54:04 orclex kernel: 0c 003 03 0 0 0 0 0 1 1 89
Jun 20 09:54:04 orclex kernel: 0d 003 03 1 0 0 0 0 1 1 91
Jun 20 09:54:04 orclex kernel: 0e 003 03 0 0 0 0 0 1 1 99
Jun 20 09:54:04 orclex kernel: 0f 003 03 0 0 0 0 0 1 1 A1
Jun 20 09:54:04 orclex kernel: 10 003 03 1 1 0 1 0 1 1 A9
Jun 20 09:54:04 orclex kernel: 11 003 03 1 1 0 1 0 1 1 B1
Jun 20 09:54:04 orclex kernel: 12 003 03 1 1 0 1 0 1 1 C9
Jun 20 09:54:04 orclex kernel: 13 003 03 1 1 0 1 0 1 1 C1
Jun 20 09:54:04 orclex kernel: 14 000 00 1 0 0 0 0 0 0 00
Jun 20 09:54:04 orclex kernel: 15 003 03 1 1 0 1 0 1 1 D1
Jun 20 09:54:04 orclex kernel: 16 000 00 1 0 0 0 0 0 0 00
Jun 20 09:54:04 orclex kernel: 17 003 03 1 1 0 1 0 1 1 B9
Jun 20 09:54:04 orclex kernel: Using vector-based indexing
Jun 20 09:54:04 orclex kernel: IRQ to pin mappings:
Jun 20 09:54:04 orclex kernel: IRQ0 -> 0:2
Jun 20 09:54:04 orclex kernel: IRQ1 -> 0:1
Jun 20 09:54:04 orclex kernel: IRQ3 -> 0:3
Jun 20 09:54:04 orclex kernel: IRQ4 -> 0:4
Jun 20 09:54:04 orclex kernel: IRQ5 -> 0:5
Jun 20 09:54:04 orclex kernel: IRQ6 -> 0:6
Jun 20 09:54:04 orclex kernel: IRQ7 -> 0:7
Jun 20 09:54:04 orclex kernel: IRQ8 -> 0:8
Jun 20 09:54:04 orclex kernel: IRQ9 -> 0:9
Jun 20 09:54:04 orclex kernel: IRQ10 -> 0:10
Jun 20 09:54:04 orclex kernel: IRQ11 -> 0:11
Jun 20 09:54:04 orclex kernel: IRQ12 -> 0:12
Jun 20 09:54:04 orclex kernel: IRQ13 -> 0:13
Jun 20 09:54:04 orclex kernel: IRQ14 -> 0:14
Jun 20 09:54:04 orclex kernel: IRQ15 -> 0:15
Jun 20 09:54:04 orclex kernel: IRQ169 -> 0:16
Jun 20 09:54:04 orclex kernel: IRQ177 -> 0:17
Jun 20 09:54:04 orclex kernel: IRQ201 -> 0:18
Jun 20 09:54:04 orclex kernel: IRQ193 -> 0:19
Jun 20 09:54:04 orclex kernel: IRQ209 -> 0:21
Jun 20 09:54:04 orclex kernel: IRQ185 -> 0:23
Jun 20 09:54:04 orclex kernel: .................................... done.
Jun 20 09:54:04 orclex kernel: TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
Jun 20 09:54:04 orclex kernel: pnp: 00:07: ioport range 0x290-0x297 has been reserved
Jun 20 09:54:04 orclex kernel: pnp: 00:09: ioport range 0x3f6-0x3f6 has been reserved
Jun 20 09:54:04 orclex kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
Jun 20 09:54:04 orclex kernel: IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Jun 20 09:54:04 orclex kernel: NTFS driver 2.1.22 [Flags: R/O].
Jun 20 09:54:04 orclex kernel: Initializing Cryptographic API
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 20 09:54:04 orclex kernel: assign_interrupt_mode Found MSI capability
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie00]
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie03]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jun 20 09:54:04 orclex kernel: assign_interrupt_mode Found MSI capability
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie00]
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie02]
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie03]
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1c.1 to 64
Jun 20 09:54:04 orclex kernel: assign_interrupt_mode Found MSI capability
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie00]
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie02]
Jun 20 09:54:04 orclex kernel: Allocate Port Service[pcie03]
Jun 20 09:54:04 orclex kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 6144k, total 131072k
Jun 20 09:54:04 orclex kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=1
Jun 20 09:54:04 orclex kernel: vesafb: scrolling: redraw
Jun 20 09:54:04 orclex kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Jun 20 09:54:04 orclex kernel: Console: switching to colour frame buffer device 128x48
Jun 20 09:54:04 orclex kernel: fb0: VESA VGA frame buffer device
Jun 20 09:54:04 orclex kernel: vga16fb: initializing
Jun 20 09:54:04 orclex kernel: vga16fb: mapped to 0xffff8100000a0000
Jun 20 09:54:04 orclex kernel: fb1: VGA16 VGA frame buffer device
Jun 20 09:54:04 orclex kernel: ACPI: Power Button (FF) [PWRF]
Jun 20 09:54:04 orclex kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 20 09:54:04 orclex kernel: Real Time Clock Driver v1.12
Jun 20 09:54:04 orclex kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jun 20 09:54:04 orclex kernel: [drm] Initialized drm 1.0.0 20040925
Jun 20 09:54:04 orclex kernel: Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Jun 20 09:54:04 orclex kernel: Hangcheck: Using monotonic_clock().
Jun 20 09:54:04 orclex kernel: PNP: PS/2 controller doesn't have AUX irq; using default 0xc
Jun 20 09:54:04 orclex kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
Jun 20 09:54:04 orclex kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 20 09:54:04 orclex kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 20 09:54:04 orclex kernel: io scheduler noop registered
Jun 20 09:54:04 orclex kernel: io scheduler anticipatory registered
Jun 20 09:54:04 orclex kernel: io scheduler deadline registered
Jun 20 09:54:04 orclex kernel: io scheduler cfq registered
Jun 20 09:54:04 orclex kernel: Floppy drive(s): fd0 is 1.44M
Jun 20 09:54:04 orclex kernel: FDC 0 is a post-1991 82077
Jun 20 09:54:04 orclex kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jun 20 09:54:04 orclex kernel: loop: loaded (max 8 devices)
Jun 20 09:54:04 orclex kernel: pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: skge addr 0xcfefc000 irq 169 chip Yukon-Lite rev 7
Jun 20 09:54:04 orclex kernel: skge eth0: addr 00:11:2f:1c:f0:91
Jun 20 09:54:04 orclex kernel: PPP generic driver version 2.4.2
Jun 20 09:54:04 orclex kernel: PPP Deflate Compression module registered
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 24
Jun 20 09:54:04 orclex kernel: dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
Jun 20 09:54:04 orclex kernel: Linux video capture interface: v1.00
Jun 20 09:54:04 orclex kernel: bttv: driver version 0.9.15 loaded
Jun 20 09:54:04 orclex kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Jun 20 09:54:04 orclex kernel: bttv: Bt8xx card found (0).
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: bttv0: Bt878 (rev 2) at 0000:01:09.0, irq: 177, latency: 64, mmio: 0xd7ffe000
Jun 20 09:54:04 orclex kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Jun 20 09:54:04 orclex kernel: bttv0: using: Hauppauge (bt878) [card=10,autodetected]
Jun 20 09:54:04 orclex kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Jun 20 09:54:04 orclex kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Jun 20 09:54:04 orclex kernel: tveeprom: Hauppauge: model = 61334, rev = B , serial# = 3026517
Jun 20 09:54:04 orclex kernel: tveeprom: tuner = Philips FM1216 (idx = 21, type = 5)
Jun 20 09:54:04 orclex kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
Jun 20 09:54:04 orclex kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Jun 20 09:54:04 orclex kernel: bttv0: using tuner=5
Jun 20 09:54:04 orclex kernel: bttv0: registered device video0
Jun 20 09:54:04 orclex kernel: bttv0: registered device vbi0
Jun 20 09:54:04 orclex kernel: bttv0: registered device radio0
Jun 20 09:54:04 orclex kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Jun 20 09:54:04 orclex kernel: msp34xx: init: chip=MSP3410D-B4 +nicam +simple mode=simple
Jun 20 09:54:04 orclex kernel: msp3410: daemon started
Jun 20 09:54:04 orclex kernel: tvaudio: TV audio decoder + audio/video mux driver
Jun 20 09:54:04 orclex kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
Jun 20 09:54:04 orclex kernel: SAA5246A (or compatible) Teletext decoder driver version 1.8
Jun 20 09:54:04 orclex kernel: SAA5249 driver (SAA5249 interface) for VideoText version 1.8
Jun 20 09:54:04 orclex kernel: tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Jun 20 09:54:04 orclex kernel: tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Jun 20 09:54:04 orclex kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 20 09:54:04 orclex kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 20 09:54:04 orclex kernel: ICH6: IDE controller at PCI slot 0000:00:1f.1
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201
Jun 20 09:54:04 orclex kernel: ICH6: chipset revision 3
Jun 20 09:54:04 orclex kernel: ICH6: 100% native mode on irq 201
Jun 20 09:54:04 orclex kernel: ide0: BM-DMA at 0x5800-0x5807, BIOS settings: hda:DMA, hdb:pio
Jun 20 09:54:04 orclex kernel: ide1: BM-DMA at 0x5808-0x580f, BIOS settings: hdc:pio, hdd:pio
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide0...
Jun 20 09:54:04 orclex kernel: hda: IC35L060AVV207-0, ATA DISK drive
Jun 20 09:54:04 orclex kernel: ide0 at 0x7000-0x7007,0x6802 on irq 201
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide1...
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide1...
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide2...
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide3...
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide4...
Jun 20 09:54:04 orclex kernel: Probing IDE interface ide5...
Jun 20 09:54:04 orclex kernel: hda: max request size: 1024KiB
Jun 20 09:54:04 orclex kernel: hda: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
Jun 20 09:54:04 orclex kernel: hda: cache flushes supported
Jun 20 09:54:04 orclex kernel: hda: hda1 hda2
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: Found Controller: IT8212 UDMA/ATA133 RAID Controller
Jun 20 09:54:04 orclex kernel: irq 201: nobody cared!
Jun 20 09:54:04 orclex kernel:
Jun 20 09:54:04 orclex kernel: Call Trace: <IRQ> <ffffffff801540b0>{__report_bad_irq+48} <ffffffff80154174>{note_interrupt+91}
Jun 20 09:54:04 orclex kernel: <ffffffff80153b2c>{__do_IRQ+234} <ffffffff8011049d>{do_IRQ+67}
Jun 20 09:54:04 orclex kernel: <ffffffff8010dded>{ret_from_intr+0} <EOI> <ffffffff8010df1d>{retint_kernel+38}
Jun 20 09:54:04 orclex kernel: <ffffffff8010bb2c>{mwait_idle+94} <ffffffff8010bab0>{cpu_idle+71}
Jun 20 09:54:04 orclex kernel: <ffffffff80680876>{start_kernel+445} <ffffffff8068022c>{x86_64_start_kernel+320}
Jun 20 09:54:04 orclex kernel:
Jun 20 09:54:04 orclex kernel: handlers:
Jun 20 09:54:04 orclex kernel: [<ffffffff8030f8b1>] (ide_intr+0x0/0x17a)
Jun 20 09:54:04 orclex kernel: Disabling IRQ #201
Jun 20 09:54:04 orclex kernel: iteraid_find_device: channel 0 device 1 is ATAPI.
Jun 20 09:54:04 orclex kernel: Channel[0] BM-DMA at 0x9800-0x9807
Jun 20 09:54:04 orclex kernel: IssueIdentify: resetting channel.
Jun 20 09:54:04 orclex kernel: IssueIdentify(IDE): disk[0] not ready. status=0x20
Jun 20 09:54:04 orclex kernel: FindDevices: device 2 is not present
Jun 20 09:54:04 orclex kernel: iteraid_find_device: channel 1 device 1 is ATAPI.
Jun 20 09:54:04 orclex kernel: Channel[1] BM-DMA at 0x9808-0x980F
Jun 20 09:54:04 orclex kernel: scsi0 : ITE RAIDExpress133
Jun 20 09:54:04 orclex kernel: Losing some ticks... checking if CPU frequency changed.
Jun 20 09:54:04 orclex kernel: Vendor: SONY Model: CD-RW CRX210E1 Rev: 2YS1
Jun 20 09:54:04 orclex kernel: Type: CD-ROM ANSI SCSI revision: 02
Jun 20 09:54:04 orclex kernel: AtapiInterrupt: 23 words requested; 24 words xferred
Jun 20 09:54:04 orclex kernel: AtapiInterrupt error
Jun 20 09:54:04 orclex kernel: MapError: error register is b0
Jun 20 09:54:04 orclex kernel: ATAPI: command Aborted
Jun 20 09:54:04 orclex kernel: AtapiInterrupt: 32 words requested; 9 words xferred
Jun 20 09:54:04 orclex kernel: AtapiResetController enter
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (0, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (1, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter Success!
Jun 20 09:54:04 orclex kernel: AtapiResetController exit
Jun 20 09:54:04 orclex kernel: AtapiResetController enter
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (0, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (1, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter Success!
Jun 20 09:54:04 orclex kernel: AtapiResetController exit
Jun 20 09:54:04 orclex kernel: AtapiInterrupt error
Jun 20 09:54:04 orclex kernel: MapError: error register is 60
Jun 20 09:54:04 orclex kernel: ATAPI: unit attention
Jun 20 09:54:04 orclex kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 3 lun 0
Jun 20 09:54:04 orclex kernel: scsi scan: 47 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
Jun 20 09:54:04 orclex kernel: scsi0 (3:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: libata version 1.11 loaded.
Jun 20 09:54:04 orclex kernel: ahci version 1.01
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 20 09:54:04 orclex kernel: ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
Jun 20 09:54:04 orclex kernel: ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part
Jun 20 09:54:04 orclex kernel: ata1: SATA max UDMA/133 cmd 0xFFFFC20000026D00 ctl 0x0 bmdma 0x0 irq 193
Jun 20 09:54:04 orclex kernel: ata2: SATA max UDMA/133 cmd 0xFFFFC20000026D80 ctl 0x0 bmdma 0x0 irq 193
Jun 20 09:54:04 orclex kernel: ata3: SATA max UDMA/133 cmd 0xFFFFC20000026E00 ctl 0x0 bmdma 0x0 irq 193
Jun 20 09:54:04 orclex kernel: ata4: SATA max UDMA/133 cmd 0xFFFFC20000026E80 ctl 0x0 bmdma 0x0 irq 193
Jun 20 09:54:04 orclex kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f
Jun 20 09:54:04 orclex kernel: ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
Jun 20 09:54:04 orclex kernel: ata1: dev 0 configured for UDMA/133
Jun 20 09:54:04 orclex kernel: scsi1 : ahci
Jun 20 09:54:04 orclex kernel: ata2: no device found (phy stat 00000000)
Jun 20 09:54:04 orclex kernel: scsi2 : ahci
Jun 20 09:54:04 orclex kernel: ata3: no device found (phy stat 00000000)
Jun 20 09:54:04 orclex kernel: scsi3 : ahci
Jun 20 09:54:04 orclex kernel: ata4: no device found (phy stat 00000000)
Jun 20 09:54:04 orclex kernel: scsi4 : ahci
Jun 20 09:54:04 orclex kernel: Vendor: ATA Model: ST3250823AS Rev: 3.02
Jun 20 09:54:04 orclex kernel: Type: Direct-Access ANSI SCSI revision: 05
Jun 20 09:54:04 orclex kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jun 20 09:54:04 orclex kernel: SCSI device sda: drive cache: write back
Jun 20 09:54:04 orclex kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jun 20 09:54:04 orclex kernel: SCSI device sda: drive cache: write back
Jun 20 09:54:04 orclex kernel: sda: sda1 sda2 < sda5 > sda3
Jun 20 09:54:04 orclex kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Jun 20 09:54:04 orclex kernel: AtapiInterrupt error
Jun 20 09:54:04 orclex kernel: MapError: error register is 60
Jun 20 09:54:04 orclex kernel: ATAPI: unit attention
Jun 20 09:54:04 orclex kernel: AtapiInterrupt: 32 words requested; 9 words xferred
Jun 20 09:54:04 orclex kernel: AtapiResetController enter
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (0, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (1, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter Success!
Jun 20 09:54:04 orclex kernel: AtapiResetController exit
Jun 20 09:54:04 orclex kernel: AtapiResetController enter
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (0, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter: perform ATAPI soft reset (1, 1)
Jun 20 09:54:04 orclex kernel: IT8212ResetAdapter Success!
Jun 20 09:54:04 orclex kernel: AtapiResetController exit
Jun 20 09:54:04 orclex kernel: AtapiInterrupt error
Jun 20 09:54:04 orclex kernel: MapError: error register is 60
Jun 20 09:54:04 orclex kernel: ATAPI: unit attention
Jun 20 09:54:04 orclex kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 1 lun 0
Jun 20 09:54:04 orclex kernel: scsi0 (1:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: scsi0 (1:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: scsi0 (1:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: scsi0 (1:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: scsi0 (1:0): rejecting I/O to offline device
Jun 20 09:54:04 orclex kernel: sr0: scsi3-mmc drive: 0x/0x caddy
Jun 20 09:54:04 orclex kernel: Uniform CD-ROM driver Revision: 3.20
Jun 20 09:54:04 orclex kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Jun 20 09:54:04 orclex kernel: Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 5
Jun 20 09:54:04 orclex kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Jun 20 09:54:04 orclex kernel: ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 209
Jun 20 09:54:04 orclex kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[cfefb800-cfefbfff] Max Packet=[4096]
Jun 20 09:54:04 orclex kernel: ieee1394: raw1394: /dev/raw1394 device initialized
Jun 20 09:54:04 orclex kernel: usbmon: debugs is not available
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 20 09:54:04 orclex kernel: ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
Jun 20 09:54:04 orclex kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jun 20 09:54:04 orclex kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Jun 20 09:54:04 orclex kernel: ehci_hcd 0000:00:1d.7: irq 185, io mem 0xcfdff800
Jun 20 09:54:04 orclex kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jun 20 09:54:04 orclex kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Jun 20 09:54:04 orclex kernel: hub 1-0:1.0: USB hub found
Jun 20 09:54:04 orclex kernel: hub 1-0:1.0: 8 ports detected
Jun 20 09:54:04 orclex kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jun 20 09:54:04 orclex kernel: USB Universal Host Controller Interface driver v2.2
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.0: irq 185, io base 0x00004400
Jun 20 09:54:04 orclex kernel: hub 2-0:1.0: USB hub found
Jun 20 09:54:04 orclex kernel: hub 2-0:1.0: 2 ports detected
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.1: irq 193, io base 0x00004800
Jun 20 09:54:04 orclex kernel: hub 3-0:1.0: USB hub found
Jun 20 09:54:04 orclex kernel: hub 3-0:1.0: 2 ports detected
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.2: irq 201, io base 0x00005000
Jun 20 09:54:04 orclex kernel: hub 4-0:1.0: USB hub found
Jun 20 09:54:04 orclex kernel: hub 4-0:1.0: 2 ports detected
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Jun 20 09:54:04 orclex kernel: uhci_hcd 0000:00:1d.3: irq 169, io base 0x00005400
Jun 20 09:54:04 orclex kernel: hub 5-0:1.0: USB hub found
Jun 20 09:54:04 orclex kernel: hub 5-0:1.0: 2 ports detected
Jun 20 09:54:04 orclex kernel: Initializing USB Mass Storage driver...
Jun 20 09:54:04 orclex kernel: usbcore: registered new driver usb-storage
Jun 20 09:54:04 orclex kernel: USB Mass Storage support registered.
Jun 20 09:54:04 orclex kernel: usb 2-1: new low speed USB device using uhci_hcd and address 2
Jun 20 09:54:04 orclex kernel: usbcore: registered new driver hiddev
Jun 20 09:54:04 orclex kernel: usb 3-1: new low speed USB device using uhci_hcd and address 2
Jun 20 09:54:04 orclex kernel: input: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder game controller] on usb-0000:00:1d.0-1
Jun 20 09:54:04 orclex kernel: input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-1
Jun 20 09:54:04 orclex kernel: usbcore: registered new driver usbhid
Jun 20 09:54:04 orclex kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Jun 20 09:54:04 orclex kernel: mice: PS/2 mouse device common for all mice
Jun 20 09:54:04 orclex kernel: input: PC Speaker
Jun 20 09:54:04 orclex kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jun 20 09:54:04 orclex kernel: device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Jun 20 09:54:04 orclex kernel: GACT probability on
Jun 20 09:54:04 orclex kernel: Mirror/redirect action on
Jun 20 09:54:04 orclex kernel: u32 classifier
Jun 20 09:54:04 orclex kernel: Perfomance counters on
Jun 20 09:54:04 orclex kernel: input device check on
Jun 20 09:54:04 orclex kernel: Actions configured
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 2
Jun 20 09:54:04 orclex kernel: IP: routing cache hash table of 4096 buckets, 64Kbytes
Jun 20 09:54:04 orclex kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Jun 20 09:54:04 orclex kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jun 20 09:54:04 orclex kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jun 20 09:54:04 orclex kernel: IPv4 over IPv4 tunneling driver
Jun 20 09:54:04 orclex kernel: ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
Jun 20 09:54:04 orclex kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jun 20 09:54:04 orclex kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jun 20 09:54:04 orclex kernel: ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Jun 20 09:54:04 orclex kernel: Initializing IPsec netlink socket
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 1
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 17
Jun 20 09:54:04 orclex kernel: NET: Registered protocol family 15
Jun 20 09:54:04 orclex kernel: swsusp: Suspend partition has wrong signature?
Jun 20 09:54:04 orclex kernel: md: Autodetecting RAID arrays.
Jun 20 09:54:04 orclex kernel: md: autorun ...
Jun 20 09:54:04 orclex kernel: md: ... autorun DONE.
Jun 20 09:54:04 orclex kernel: kjournald starting. Commit interval 5 seconds
Jun 20 09:54:04 orclex kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 20 09:54:04 orclex kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 20 09:54:04 orclex kernel: Freeing unused kernel memory: 228k freed
Jun 20 09:54:04 orclex kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800007ef52b]
Jun 20 09:54:04 orclex kernel: Adding 2658716k swap on /dev/sda5. Priority:-1 extents:1
Jun 20 09:54:04 orclex kernel: EXT3 FS on sda3, internal journal
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 209
Jun 20 09:54:04 orclex kernel: hda: dma_timer_expiry: dma status == 0x24
Jun 20 09:54:04 orclex kernel: hda: DMA interrupt recovery
Jun 20 09:54:04 orclex kernel: hda: lost interrupt
Jun 20 09:54:04 orclex kernel: kjournald starting. Commit interval 5 seconds
Jun 20 09:54:04 orclex kernel: EXT3 FS on sda1, internal journal
Jun 20 09:54:04 orclex kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 20 09:54:04 orclex kernel: PCI: Setting latency timer of device 0000:00:1b.0 to 64
Jun 20 09:54:04 orclex kernel: ACPI: PCI Interrupt 0000:01:09.1[A] -> GSI 17 (level, low) -> IRQ 177
Jun 20 09:54:04 orclex kernel: parport: PnPBIOS parport detected.
Jun 20 09:54:04 orclex kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Jun 20 09:54:04 orclex kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Jun 20 09:54:04 orclex kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 20 09:54:04 orclex kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 20 09:54:04 orclex kernel: skge eth0: enabling interface
Jun 20 09:54:04 orclex kernel: skge eth0: Link is up at 100 Mbps, full duplex, flow control none
Jun 20 09:54:05 orclex cpufreqd: libsys_init() - no batteries found, not a laptop?
Jun 20 09:54:07 orclex kernel: lp0: using parport0 (interrupt-driven).
Jun 20 09:54:07 orclex udev[4338]: creating device node '/dev/lp0'
Jun 20 09:54:08 orclex kernel: scsi: unknown opcode 0x85
Jun 20 09:54:08 orclex lpd[4438]: restarted
Jun 20 09:54:08 orclex hddtemp[4429]: /dev/hda: IC35L060AVV207-0: 34 C
Jun 20 09:54:09 orclex /usr/sbin/gpm[4401]: Detected EXPS/2 protocol mouse.
Jun 20 09:54:09 orclex nmbd[4448]: [2005/06/20 09:54:09, 0, pid=4448] nmbd/asyncdns.c:start_async_dns(149)
Jun 20 09:54:09 orclex nmbd[4448]: started asyncdns process 4449
Jun 20 09:54:09 orclex kernel: irq 201: nobody cared!
Jun 20 09:54:09 orclex kernel:
Jun 20 09:54:09 orclex kernel: Call Trace: <IRQ> <ffffffff801540b0>{__report_bad_irq+48} <ffffffff80154174>{note_interrupt+91}
Jun 20 09:54:09 orclex kernel: <ffffffff80153b2c>{__do_IRQ+234} <ffffffff8011049d>{do_IRQ+67}
Jun 20 09:54:09 orclex kernel: <ffffffff8010dded>{ret_from_intr+0} <EOI> <ffffffff8010d84a>{system_call+126}
Jun 20 09:54:09 orclex kernel:
Jun 20 09:54:09 orclex kernel: handlers:
Jun 20 09:54:09 orclex kernel: [<ffffffff8030f8b1>] (ide_intr+0x0/0x17a)
Jun 20 09:54:09 orclex kernel: [<ffffffff8035a0b5>] (usb_hcd_irq+0x0/0x68)
Jun 20 09:54:09 orclex kernel: Disabling IRQ #201
Jun 20 09:54:10 orclex smartd[4455]: smartd version 5.32 Copyright (C) 2002-4 Bruce Allen
Jun 20 09:54:10 orclex smartd[4455]: Home page is http://smartmontools.sourceforge.net/
Jun 20 09:54:10 orclex smartd[4455]: Opened configuration file /etc/smartd.conf
Jun 20 09:54:10 orclex smartd[4455]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf
Jun 20 09:54:10 orclex smartd[4455]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Jun 20 09:54:10 orclex smartd[4455]: Device: /dev/hda, opened
Jun 20 09:54:20 orclex kernel: hda: lost interrupt
Jun 20 09:54:20 orclex smartd[4455]: Device: /dev/hda, found in smartd database.
Jun 20 09:54:21 orclex smartd[4455]: Device: /dev/hda, is SMART capable. Adding to "monitor" list.
Jun 20 09:54:21 orclex smartd[4455]: Device: /dev/sda, opened
Jun 20 09:54:21 orclex kernel: program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jun 20 09:54:21 orclex kernel: program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
Jun 20 09:54:21 orclex smartd[4455]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features
Jun 20 09:54:21 orclex smartd[4455]: Unable to register SCSI device /dev/sda at line 23 of file /etc/smartd.conf
Jun 20 09:54:21 orclex smartd[4455]: Monitoring 1 ATA and 0 SCSI devices
Jun 20 09:54:21 orclex kernel: irq 201: nobody cared!
Jun 20 09:54:21 orclex kernel:
Jun 20 09:54:21 orclex kernel: Call Trace: <IRQ> <ffffffff801540b0>{__report_bad_irq+48} <ffffffff80154174>{note_interrupt+91}
Jun 20 09:54:21 orclex kernel: <ffffffff80153b2c>{__do_IRQ+234} <ffffffff8011049d>{do_IRQ+67}
Jun 20 09:54:21 orclex kernel: <ffffffff8010dded>{ret_from_intr+0} <EOI> <ffffffff8010df1d>{retint_kernel+38}
Jun 20 09:54:21 orclex kernel: <ffffffff8010bb2c>{mwait_idle+94} <ffffffff8010bab0>{cpu_idle+71}
Jun 20 09:54:21 orclex kernel: <ffffffff80680876>{start_kernel+445} <ffffffff8068022c>{x86_64_start_kernel+320}
Jun 20 09:54:21 orclex kernel:
Jun 20 09:54:21 orclex kernel: handlers:
Jun 20 09:54:21 orclex kernel: [<ffffffff8030f8b1>] (ide_intr+0x0/0x17a)
Jun 20 09:54:21 orclex kernel: [<ffffffff8035a0b5>] (usb_hcd_irq+0x0/0x68)
Jun 20 09:54:21 orclex kernel: Disabling IRQ #201
Jun 20 09:54:31 orclex kernel: hda: lost interrupt
Jun 20 09:54:31 orclex smartd[4458]: smartd has fork()ed into background mode. New PID=4458.
Jun 20 09:54:31 orclex smartd[4458]: file /var/run/smartd.pid written containing PID 4458
Jun 20 09:54:32 orclex kernel: irq 201: nobody cared!
Jun 20 09:54:32 orclex kernel:
Jun 20 09:54:32 orclex kernel: Call Trace: <IRQ> <ffffffff801540b0>{__report_bad_irq+48} <ffffffff80154174>{note_interrupt+91}
Jun 20 09:54:32 orclex kernel: <ffffffff80153b2c>{__do_IRQ+234} <ffffffff8011049d>{do_IRQ+67}
Jun 20 09:54:32 orclex kernel: <ffffffff8010dded>{ret_from_intr+0} <EOI> <ffffffff8010df1d>{retint_kernel+38}
Jun 20 09:54:32 orclex kernel: <ffffffff8010bb2c>{mwait_idle+94} <ffffffff8010bab0>{cpu_idle+71}
Jun 20 09:54:32 orclex kernel: <ffffffff80680876>{start_kernel+445} <ffffffff8068022c>{x86_64_start_kernel+320}
Jun 20 09:54:32 orclex kernel:
Jun 20 09:54:32 orclex kernel: handlers:
Jun 20 09:54:32 orclex kernel: [<ffffffff8030f8b1>] (ide_intr+0x0/0x17a)
Jun 20 09:54:32 orclex kernel: [<ffffffff8035a0b5>] (usb_hcd_irq+0x0/0x68)
Jun 20 09:54:32 orclex kernel: Disabling IRQ #201
Jun 20 09:54:33 orclex rpc.statd[4575]: Version 1.0.7 Starting
Jun 20 09:54:33 orclex rpc.statd[4575]: statd running as root. chown /var/lib/nfs/sm to choose different user
Jun 20 09:54:33 orclex Xprt_64: No matching visual for __GLcontextMode with visual class = 0 (32775), nplanes = 8
Jun 20 09:54:33 orclex anacron[4584]: Anacron 2.3 started on 2005-06-20
Jun 20 09:54:33 orclex anacron[4584]: Will run job `cron.weekly' in 10 min.
Jun 20 09:54:33 orclex anacron[4584]: Jobs will be executed sequentially
Jun 20 09:54:33 orclex /usr/sbin/cron[4589]: (CRON) INFO (pidfile fd = 3)
Jun 20 09:54:33 orclex /usr/sbin/cron[4590]: (CRON) STARTUP (fork ok)
Jun 20 09:54:34 orclex /usr/sbin/cron[4590]: (CRON) INFO (Running @reboot jobs)
Jun 20 09:54:35 orclex udev[4610]: creating device node '/dev/vcs2'
Jun 20 09:54:35 orclex udev[4612]: creating device node '/dev/vcsa2'
Jun 20 09:54:35 orclex udev[4624]: creating device node '/dev/vcs3'
Jun 20 09:54:35 orclex udev[4629]: creating device node '/dev/vcsa3'
Jun 20 09:54:35 orclex udev[4639]: creating device node '/dev/vcs4'
Jun 20 09:54:35 orclex udev[4640]: creating device node '/dev/vcsa4'
Jun 20 09:54:36 orclex udev[4642]: creating device node '/dev/vcs5'
Jun 20 09:54:36 orclex udev[4650]: creating device node '/dev/vcsa5'
Jun 20 09:54:36 orclex udev[4671]: creating device node '/dev/vcs7'
Jun 20 09:54:36 orclex udev[4669]: creating device node '/dev/vcs6'
Jun 20 09:54:36 orclex udev[4670]: creating device node '/dev/vcsa6'
Jun 20 09:54:36 orclex udev[4700]: creating device node '/dev/vcsa7'
Jun 20 09:54:36 orclex udev[4722]: removing device node '/dev/vcsa4'
Jun 20 09:54:36 orclex udev[4723]: removing device node '/dev/vcsa3'
Jun 20 09:54:36 orclex udev[4726]: removing device node '/dev/vcs3'
Jun 20 09:54:36 orclex udev[4752]: removing device node '/dev/vcsa5'
Jun 20 09:54:36 orclex udev[4745]: removing device node '/dev/vcsa6'
Jun 20 09:54:36 orclex udev[4746]: removing device node '/dev/vcs2'
Jun 20 09:54:36 orclex udev[4747]: removing device node '/dev/vcsa2'
Jun 20 09:54:36 orclex udev[4748]: removing device node '/dev/vcs4'
Jun 20 09:54:36 orclex udev[4765]: removing device node '/dev/vcs5'
Jun 20 09:54:36 orclex udev[4791]: removing device node '/dev/vcs6'
Jun 20 09:54:36 orclex udev[4817]: removing device node '/dev/vcs7'
Jun 20 09:54:36 orclex udev[4818]: removing device node '/dev/vcsa7'
Jun 20 09:54:36 orclex udev[4841]: creating device node '/dev/vcs7'
Jun 20 09:54:36 orclex udev[4842]: creating device node '/dev/vcsa7'
Jun 20 09:54:36 orclex udev[4859]: creating device node '/dev/vcsa2'
Jun 20 09:54:36 orclex udev[4863]: creating device node '/dev/vcsa3'
Jun 20 09:54:36 orclex udev[4861]: creating device node '/dev/vcs3'
Jun 20 09:54:36 orclex udev[4858]: creating device node '/dev/vcs2'
Jun 20 09:54:36 orclex udev[4874]: creating device node '/dev/vcs5'
Jun 20 09:54:36 orclex udev[4875]: creating device node '/dev/vcsa4'
Jun 20 09:54:36 orclex udev[4892]: creating device node '/dev/vcsa5'
Jun 20 09:54:36 orclex udev[4893]: creating device node '/dev/vcs6'
Jun 20 09:54:36 orclex udev[4894]: creating device node '/dev/vcsa6'
Jun 20 09:54:36 orclex udev[4870]: creating device node '/dev/vcs4'
Jun 20 09:54:37 orclex udev[4951]: removing device node '/dev/vcs7'
Jun 20 09:54:37 orclex udev[4952]: removing device node '/dev/vcsa7'
Jun 20 09:54:37 orclex gdm[4608]: gdm_slave_xioerror_handler: Schwerwiegender X-Fehler - :0 wird neu gestartet
Jun 20 09:54:40 orclex udev[4969]: creating device node '/dev/vcs7'
Jun 20 09:54:40 orclex udev[4987]: removing device node '/dev/vcs7'
Jun 20 09:54:40 orclex udev[5005]: creating device node '/dev/vcsa7'
Jun 20 09:54:40 orclex udev[5013]: creating device node '/dev/vcs7'
Jun 20 09:54:42 orclex udev[5025]: removing device node '/dev/vcs7'
Jun 20 09:54:42 orclex gdm[4967]: gdm_slave_xioerror_handler: Schwerwiegender X-Fehler - :0 wird neu gestartet
Jun 20 09:54:42 orclex udev[5027]: removing device node '/dev/vcsa7'
Jun 20 09:54:45 orclex udev[5044]: creating device node '/dev/vcs7'
Jun 20 09:54:45 orclex udev[5072]: creating device node '/dev/vcsa7'
Jun 20 09:54:45 orclex udev[5080]: removing device node '/dev/vcs7'
Jun 20 09:54:45 orclex udev[5088]: creating device node '/dev/vcs7'
Jun 20 09:54:46 orclex udev[5101]: removing device node '/dev/vcs7'
Jun 20 09:54:46 orclex udev[5102]: removing device node '/dev/vcsa7'
Jun 20 09:54:46 orclex gdm[5035]: gdm_slave_xioerror_handler: Schwerwiegender X-Fehler - :0 wird neu gestartet
Jun 20 09:54:46 orclex gdm[4607]: deal_with_x_crashes: Das Skript XKeepsCrashing wird gestartet
Jun 20 09:54:46 orclex udev[5137]: creating device node '/dev/vcs7'
Jun 20 09:54:46 orclex udev[5138]: creating device node '/dev/vcsa7'
Jun 20 09:54:47 orclex udev[5175]: removing device node '/dev/vcs7'
Jun 20 09:54:47 orclex udev[5176]: removing device node '/dev/vcsa7'
Jun 20 09:54:47 orclex gdm[4607]: X-Server konnte nicht in kurzen Zeitabständen gestartet werden; Anzeige :0 wird deaktiviert
next prev parent reply other threads:[~2005-06-20 8:09 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-17 17:32 [2.6.12rc4] PROBLEM: "drive appears confused" and "irq 18: nobody cared!" Protasevich, Natalie
2005-06-20 8:08 ` Alexander Fieroch [this message]
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACCE04C08@USRV-EXCH4.na.uis.unisys.com>
2005-06-21 18:22 ` Alexander Fieroch
-- strict thread matches above, loose matches on Subject: below --
2005-06-17 18:41 Protasevich, Natalie
2005-06-17 17:38 Protasevich, Natalie
2005-05-18 22:24 Alexander Fieroch
2005-05-27 19:30 ` Alexander Fieroch
2005-05-28 0:16 ` Andrew Morton
2005-05-29 20:18 ` Alexander Fieroch
2005-06-14 8:04 ` Bartlomiej Zolnierkiewicz
2005-06-15 20:39 ` Alexander Fieroch
2005-06-15 21:30 ` Andrew Morton
2005-06-16 22:23 ` Alan Cox
2005-06-16 23:52 ` Bartlomiej Zolnierkiewicz
2005-06-17 10:49 ` Alexander Fieroch
2005-06-17 12:38 ` Alan Cox
2005-06-17 17:05 ` Alexander Fieroch
2005-06-17 17:17 ` Jesper Juhl
[not found] ` <42C0953B.8000506@web.de>
2005-06-28 13:47 ` Alan Cox
2005-08-04 20:25 ` Andrew Morton
2005-08-05 10:19 ` Alan Cox
2005-06-29 13:47 ` Alexander Fieroch
2005-06-17 11:29 ` Alexander Fieroch
2005-06-13 17:59 ` Alexander Fieroch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42B6798F.1060200@web.de \
--to=fieroch@web.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=Natalie.Protasevich@UNISYS.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=axboe@suse.de \
--cc=bzolnier@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.