From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ullrich Seibel Subject: [parisc-linux] Problem with two NICs on B132L+ Date: Sun, 26 Jun 2005 16:20:37 +0200 Message-ID: <42BEB9B5.4090108@bigfoot.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed To: parisc-linux@lists.parisc-linux.org Return-Path: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Hallo, I've some trouble with my NICs on *two* B132L+ (Digital DS21143 Tulip). When I switch-on the power only one of them works fine. The other one generates an error message: "***WARNING***: No MII transceiver found!" during the boot process. After rebooting both NICs are running properly. I've added the related dmesg log entries. --- schnipp --- Linux version 2.6.8-2-32 (kyle@caradhras) (gcc version 3.3.5 (Debian 1:3.3.5-7)) #1 Tue Feb 8 00:15:05 EST 2005 FP[0] enabled: Rev 1 Model 15 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 00005030 00000481 00000000 02020202 77a47330 100000f0 00000004 000000ba 0 00000ba vers 00000018 CPUID vers 15 rev 24 (0x000001f8) capabilities 0x2 model 9000/778/B132L+ Total Memory: 384 Mb initrd: 27b70000-27fee000 initrd: reserving 17b70000-17fee000 (mem_max 18000000) On node 0 totalpages: 98304 DMA zone: 98304 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 LED display at f0190001 registered Built 1 zonelists Kernel command line: root=/dev/sda3 HOME=/ console=tty0 sti=8/24 sti_font=VGA8 x16 TERM=linux palo_kernel=1/vmlinux PID hash table entries: 16 (order 4: 128 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 393216k available Calibrating delay loop... 87.85 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (ungzip failed); looks like an initrd NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } 2. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } 3. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a }, additional addresses: 0xf0800000 4. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } 5. Merlin+ 132 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03e, 0x00081 }, addit ional addresses: 0xffd0c000 0xffc00000 6. Merlin+ 132 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03e, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 7. Merlin+ 132 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03e, 0x0007b } 8. Merlin+ 132 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03e, 0x0008c } 9. Merlin+ 132 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03e, 0x00082 } 10. Merlin+ 132 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03e, 0x00084 } 11. Merlin+ 132 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03e, 0x00084 } 12. Merlin+ 132 Core PC Floppy at 0xffd0a000 [8/16/10] { 10, 0x0, 0x03e, 0x0008 3 } 13. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000 14. Merlin L2+ 132 (9000/778/B132L) at 0xfffbe000 [62] { 0, 0x0, 0x503, 0x00004 } 15. Memory at 0xfffbf000 [63] { 1, 0x0, 0x061, 0x00009 } CPU(s): 1 x PA7300LC (PCX-L2) at 132.000000 MHz Lasi version 0 at 0xffd00000 found. Dino [8/0] version 3.1 found at 0xfff80000 SCSI subsystem initialized TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) STI GSC/PCI core graphics driver Version 0.9a id 2d08c0a7-9a02587, conforms to spec rev. 8.07 graphics card name: INTERNAL_EG_640 fb0: stifb 640x480-8 frame buffer device, INTERNAL_EG_640, id: 2d08c0a7, mmio: 0xf8100000 unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Soft power switch enabled, polling @ 0xf0140000. Console: switching to colour frame buffer device 80x30 Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A ttyS1 at MMIO 0xfff83800 (irq = 106) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize mice: PS/2 mouse device common for all mice serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7 input: AT Raw Set 2 keyboard on parisc8:16:7 serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8 HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4600 blocks [1 disk] into ram disk...done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 316k freed Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip0: ***WARNING***: No MII transceiver found! eth0: Digital DS21143 Tulip rev 65 at 0xf0801000, 00:60:B0:B3:25:1E, IRQ 97. tulip1: no phy info, aborting mtable build tulip1: MII transceiver #1 config 1000 status 782d advertising 01e1. eth1: Digital DS21143 Tulip rev 65 at 0xf0802000, 00:10:83:03:FD:E6, IRQ 96. --- schnipp --- Any idea how to solve the Problem ?! TIA Ullrich Seibel _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux