Re: [PATCH] libata-dev-2.6-ncq: lengthen COMMRESET delay

[Jeff Garzik <jgarzik@pobox.com>]

Tejun Heo wrote:
>  Hello, Jeff.
>  Hello, Jens.
> 
>  This is the first patch of a series of updates to the ncq head of
> libata-dev-2.6 tree.  The first six patches (including this one) are
> independent misc updates/fixes, so I'm posting each of those patches
> as a separate mail.  After the six patches, a patchset consisted of 8
> patches follows which moves most of NCQ completion/error-handling to
> libata-core layer and implements proper error-handling.
> 
>  This patch lengthens the delay between DET setting and clearing for
> COMMRESET from 400us to 1ms.  I couldn't find any requiremen regarding
> the duration of COMMRESET in SATA I/II specs but AHCI-1.1 10.4.2
> states that it should be at least 1ms.
> 
>  Signed-off-by: Tejun Heo <htejun@gmail.com>
> 
> Index: work/drivers/scsi/libata-core.c
> ===================================================================
> --- work.orig/drivers/scsi/libata-core.c	2005-06-26 20:59:05.000000000 +0900
> +++ work/drivers/scsi/libata-core.c	2005-06-26 21:06:01.000000000 +0900
> @@ -1444,7 +1444,9 @@ void __sata_phy_reset(struct ata_port *a
>  	if (ap->flags & ATA_FLAG_SATA_RESET) {
>  		/* issue phy wake/reset */
>  		scr_write_flush(ap, SCR_CONTROL, 0x301);
> -		udelay(400);			/* FIXME: a guess */
> +		/* Couldn't find anything in SATA I/II specs, but
> +		 * AHCI-1.1 10.4.2 says at least 1 ms. */
> +		msleep(1);

applied, though I changed msleep to mdelay, since this code has not had 
wide testing.

I would like to see some testing on other controllers, before we make 
the mdelay->msleep transition.

	Jeff