All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raymond <rayau@netvigator.com>
To: alsa-devel@lists.sourceforge.net
Cc: openvortex-dev@nongnu.org
Subject: Re: [Openvortex-dev] Re: Re: [ALSA - driver 0001138]:   errors when installing au8820 modules
Date: Tue, 28 Jun 2005 15:50:54 +0800	[thread overview]
Message-ID: <42C1015E.9010201@netvigator.com> (raw)
In-Reply-To: <42A73305.9000000@mail.ru>

Igor Kovalenko wrote:
> Raymond wrote:
>>Igor Kovalenko wrote:
>>
>>>Well, I've not stated the problem clearly enough.
>>>Once set, volume stays as it should. The problem is that
>>>PCM volume is:
>>>1% - at lowest audible level
>>>25% - at about 50% audible level
>>>49% - at about max audible level
>>>51% - at lowest audible level
>>>75% - at about 50% audible level
>>>99% - at about max audible level
>>>- that is what I described as low-high-low-high.
>>>On the other hand, Master volume behaves as expected.
>>
>>
>>
>>What is the value of comment.range of 'PCM Playback Volume' in
>>/etc/asound.state for your STAC9704 (au8820) ?
>>
>>
>>According to 9704SPEC.pdf, it should be '0-31' ( 5 bits ) for STAC9704
>>PCM Out volume.
>>
> 
> 
>         control.21 {
>                 comment.access 'read write'
>                 comment.type INTEGER
>                 comment.count 2
>                 comment.range '0 - 63'
>                 iface MIXER
>                 name 'PCM Playback Volume'
>                 value.0 21
>                 value.1 21
>         }
> 
> Do you mean AC97 is incorrectly reporting 0...63 range?
> 
> 

Try the following patch to log the read/write of ac97 and post the
system log using dmesg. (loading au8820 and alsactl restore)


alsa-driver-1.0.9b/alsa-kernel/pci/au88x0/au88x0_core.c
@@ -2520,6 +2515,7 @@
  	vortex_t *card = (vortex_t *) codec->private_data;
  	unsigned int lifeboat = 0;

+	printk(KERN_INFO "ac97 write %.2x : %.4x\n",addr,data);
  	/* wait for transactions to clear */
  	while (!(hwread(card->mmio, VORTEX_CODEC_CTRL) & 0x100)) {
  		udelay(100);
@@ -2567,6 +2563,7 @@
  		}
  	} while ((data & VORTEX_CODEC_ADDMASK) !=
  		 (addr << VORTEX_CODEC_ADDSHIFT));
+	printk(KERN_INFO "ac97 read  %.2x : %.4x\n",addr,data &
VORTEX_CODEC_DATMASK);

  	/* return data. */
  	return (u16) (data & VORTEX_CODEC_DATMASK);



-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click

  parent reply	other threads:[~2005-06-28  7:50 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-28 20:22 [ALSA - driver 0001138]: errors when installing au8820 modules bugtrack
2005-06-06  2:09 ` Raymond
2005-06-06 15:49   ` Takashi Iwai
2005-06-07 15:05     ` Raymond
2005-06-07 15:16       ` Alien
2005-06-07 16:29         ` Takashi Iwai
2005-06-07 17:05           ` [Openvortex-dev] " Igor Kovalenko
2005-06-07 17:17             ` Alien
2005-06-07 17:38               ` Igor Kovalenko
2005-06-07 18:02                 ` Alien
2005-06-08 10:18                   ` Takashi Iwai
2005-06-08 11:13                     ` Alien
2005-06-08 12:12                       ` Takashi Iwai
2005-06-08 13:29                         ` Alien
2005-06-08 13:41                           ` Takashi Iwai
2005-06-08 18:09                             ` Igor Kovalenko
2005-06-08 11:40                     ` Raymond
2005-06-08 12:19                       ` Takashi Iwai
2005-06-08 18:12                         ` Igor Kovalenko
2005-06-09  8:13                           ` Raymond
2005-06-08 12:34             ` Raymond
2005-06-08 12:43               ` Takashi Iwai
2005-06-08 18:03               ` Igor Kovalenko
2005-06-09  8:54                 ` Raymond
2005-06-28  7:50                 ` Raymond [this message]
2005-07-01 19:03                   ` Igor Kovalenko
2005-07-02 12:53                     ` Raymond
2005-07-14 16:43                       ` Igor Kovalenko
2005-06-08  9:06           ` Raymond
2005-06-08 10:22             ` Takashi Iwai
2005-06-09  8:34               ` Raymond
2005-06-09 10:17                 ` [Openvortex-dev] " Igor Kovalenko
2005-06-12 15:18                   ` Raymond
2005-06-10  7:35               ` Raymond
2005-06-10 10:33                 ` Takashi Iwai
2005-06-10 11:28                   ` Raymond
2005-07-29 14:43               ` Raymond
2005-07-29 15:09                 ` Takashi Iwai
2005-08-05 12:46                   ` Raymond
2005-08-05 14:32                     ` Takashi Iwai
     [not found]                       ` <43067D3B.5040601@netvigator.com>
2005-08-21 12:41                         ` Takashi Iwai
2005-08-23 15:20                           ` Raymond
2005-08-23 17:18                             ` Takashi Iwai
2005-08-23 21:40                               ` Alien
2005-08-24 10:35                                 ` Takashi Iwai
2005-08-25 17:12                                 ` Raymond
2005-08-25 17:43                                   ` Alien
2005-08-26  9:01                                     ` Raymond
2005-08-25 18:58                                   ` Manuel Jander
2005-08-25 20:04                                     ` Alien
2005-06-08 10:23             ` Alien
2005-06-09  8:49               ` Raymond

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42C1015E.9010201@netvigator.com \
    --to=rayau@netvigator.com \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=openvortex-dev@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.