All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Krufky <mkrufky@m1k.net>
To: Andrew Morton <akpm@osdl.org>
Cc: Mac Michaels <wmichaels1@earthlink.net>,
	LKML <linux-kernel@vger.kernel.org>,
	Linux and Kernel Video <video4linux-list@redhat.com>
Subject: [PATCH] v4l: add DVB support for DViCO FusionHDTV3 Gold-Q
Date: Sat, 02 Jul 2005 14:54:38 -0400	[thread overview]
Message-ID: <42C6E2EE.4030908@m1k.net> (raw)

[-- Attachment #1: Type: text/plain, Size: 76 bytes --]

This patch depends on:

dvb-frontend-add-driver-for-lgdt3302.patch

in -mm.

[-- Attachment #2: v4l-add-dvb-support-for-dvico-fusionhdtv3-gold-q.patch --]
[-- Type: text/plain, Size: 5004 bytes --]

Add dvb support in v4l for DViCO FusionHDTV3 Gold-Q
using lgdt3302 frontend.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>

 linux/drivers/media/video/cx88/cx88-cards.c |    1 
 linux/drivers/media/video/cx88/cx88-dvb.c   |   43 +++++++++++++++++++-
 linux/drivers/media/video/cx88/cx88-i2c.c   |    3 -
 linux/drivers/media/video/cx88/cx88-mpeg.c  |   13 ++++--
 4 files changed, 53 insertions(+), 7 deletions(-)

diff -u linux-2.6.13/drivers/media/video/cx88/cx88-cards.c linux/drivers/media/video/cx88/cx88-cards.c
--- linux-2.6.13/drivers/media/video/cx88/cx88-cards.c	2005-07-02 13:19:07.000000000 +0000
+++ linux/drivers/media/video/cx88/cx88-cards.c	2005-07-02 14:06:32.000000000 +0000
@@ -485,6 +485,7 @@
 			.vmux   = 2,
 			.gpio0	= 0x0f00,
 		}},
+		.dvb            = 1,
 	},
         [CX88_BOARD_HAUPPAUGE_DVB_T1] = {
 		.name           = "Hauppauge Nova-T DVB-T",
diff -u linux-2.6.13/drivers/media/video/cx88/cx88-i2c.c linux/drivers/media/video/cx88/cx88-i2c.c
--- linux-2.6.13/drivers/media/video/cx88/cx88-i2c.c	2005-07-02 13:18:36.000000000 +0000
+++ linux/drivers/media/video/cx88/cx88-i2c.c	2005-07-02 14:06:32.000000000 +0000
@@ -1,5 +1,5 @@
 /*
-    $Id: cx88-i2c.c,v 1.23 2005/06/12 04:19:19 mchehab Exp $
+    $Id: cx88-i2c.c,v 1.24 2005/06/17 18:46:23 mkrufky Exp $
 
     cx88-i2c.c  --  all the i2c code is here
 
@@ -157,6 +157,7 @@
 };
 
 static char *i2c_devs[128] = {
+	[ 0x1c >> 1 ] = "lgdt3302",
 	[ 0x86 >> 1 ] = "tda9887/cx22702",
 	[ 0xa0 >> 1 ] = "eeprom",
 	[ 0xc0 >> 1 ] = "tuner (analog)",
diff -u linux-2.6.13/drivers/media/video/cx88/cx88-mpeg.c linux/drivers/media/video/cx88/cx88-mpeg.c
--- linux-2.6.13/drivers/media/video/cx88/cx88-mpeg.c	2005-07-02 13:18:36.000000000 +0000
+++ linux/drivers/media/video/cx88/cx88-mpeg.c	2005-07-02 14:06:32.000000000 +0000
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-mpeg.c,v 1.26 2005/06/03 13:31:51 mchehab Exp $
+ * $Id: cx88-mpeg.c,v 1.28 2005/06/20 03:36:00 mkrufky Exp $
  *
  *  Support for the mpeg transport stream transfers
  *  PCI function #2 of the cx2388x.
@@ -70,11 +70,16 @@
 
 	if (cx88_boards[core->board].dvb) {
 		/* negedge driven & software reset */
-		cx_write(TS_GEN_CNTRL, 0x40);
+		cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
 		udelay(100);
 		cx_write(MO_PINMUX_IO, 0x00);
-		cx_write(TS_HW_SOP_CNTRL,47<<16|188<<4|0x00);
-		cx_write(TS_SOP_STAT,0x00);
+		if (core->board == CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q) {
+			cx_write(TS_HW_SOP_CNTRL,0x47<<16 | 188<<4 | 0x00);
+			cx_write(TS_SOP_STAT, 0<<16 | 0<<14 | 1<<13 | 0<<12);
+		} else {
+			cx_write(TS_HW_SOP_CNTRL,47<<16|188<<4|0x00);
+			cx_write(TS_SOP_STAT,0x00);
+		}
 		cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
 		udelay(100);
 	}
diff -u linux-2.6.13/drivers/media/video/cx88/cx88-dvb.c linux/drivers/media/video/cx88/cx88-dvb.c
--- linux-2.6.13/drivers/media/video/cx88/cx88-dvb.c	2005-07-02 13:19:07.000000000 +0000
+++ linux/drivers/media/video/cx88/cx88-dvb.c	2005-07-02 14:06:32.000000000 +0000
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-dvb.c,v 1.36 2005/06/21 06:08:12 mkrufky Exp $
+ * $Id: cx88-dvb.c,v 1.37 2005/06/28 23:41:47 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * MPEG Transport Stream (DVB) routines
@@ -30,9 +30,10 @@
 #include <linux/file.h>
 #include <linux/suspend.h>
 
-/* those two frontends need merging via linuxtv cvs ... */
+/* these three frontends need merging via linuxtv cvs ... */
 #define HAVE_CX22702 1
 #define HAVE_OR51132 1
+#define HAVE_LGDT3302 1
 
 #include "cx88.h"
 #include "dvb-pll.h"
@@ -44,6 +45,9 @@
 #if HAVE_OR51132
 # include "or51132.h"
 #endif
+#if HAVE_LGDT3302
+# include "lgdt3302.h"
+#endif
 
 MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
@@ -199,6 +203,25 @@
 };
 #endif
 
+#if HAVE_LGDT3302
+static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
+{
+	struct cx8802_dev *dev= fe->dvb->priv;
+	if (is_punctured)
+		dev->ts_gen_cntrl |= 0x04;
+	else
+		dev->ts_gen_cntrl &= ~0x04;
+	return 0;
+}
+
+static struct lgdt3302_config fusionhdtv_3_gold_q = {
+	.demod_address    = 0x0e,
+	.pll_address      = 0x61,
+	.pll_desc         = &dvb_pll_microtune_4042,
+	.set_ts_params    = lgdt3302_set_ts_param,
+};
+#endif
+
 static int dvb_register(struct cx8802_dev *dev)
 {
 	/* init struct videobuf_dvb */
@@ -243,6 +266,22 @@
 						 &dev->core->i2c_adap);
 		break;
 #endif
+#if HAVE_LGDT3302
+	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
+		dev->ts_gen_cntrl = 0x08;
+		{
+		/* Do a hardware reset of chip before using it. */
+		struct cx88_core *core = dev->core;
+
+		cx_clear(MO_GP0_IO, 1);
+		mdelay(100);
+		cx_set(MO_GP0_IO, 9); // ANT connector too FIXME
+		mdelay(200);
+		dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_q,
+						    &dev->core->i2c_adap);
+		}
+		break;
+#endif
 	default:
 		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
 		       dev->core->name);

                 reply	other threads:[~2005-07-02 18:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42C6E2EE.4030908@m1k.net \
    --to=mkrufky@m1k.net \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=video4linux-list@redhat.com \
    --cc=wmichaels1@earthlink.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.