From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lorenzo Grio Date: Tue, 05 Jul 2005 10:40:30 +0000 Subject: Re: [LARTC] multihome network problem Message-Id: <42CA639E.1070600@katamail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Sorry for delay in this response. I have just sent to you my working iproute/iptable config. I have also host connected to eth0 and all works ok, but remember that every host must have two ip address, one for each ISP. Daniel Wittenberg ha scritto: > I've been having some issues with this kind of setup, and was curious if > you'd mind sharing your iproute/iptables config that makes this work? I > had this working a few years ago, but something has broken and for the > life of me can't find any reason why :( (and yes have read the lartc > pdf). Also, do you have hosts connected to eth0 that are accessed (via > nat) from both ISP connections? That's where my biggest problem comes > from. Any help appreciated! > > Dan > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc