[U-Boot-Users] Problem starting u-boot on Xilinx V2P

[Thorsten Lueck <T.Lueck@IfEN.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Cedric VINCENT wrote:

>>Another strange thing is, that I
>>only have 32MB RAM on board but not 128MB as the ml300 has. However, I
>>could not find any hardcoded RAM size in the source files for the ml300.
> 
> Take a look into board/xilinx/ml300/ml300.c, it *is* hardcoded !

Indeed - that was the problem - I greped for the size (in hex and dec)
but _not_ for a formular ;-)


> As Wolgang said, "you cannot just use a configuration for one board
> and expect it  to work on a different board". But if you change your
> config file and U-Boot still hangs after "Now running in RAM at ....."
> (don't forget to #define DEBUG) it may be a U-Boot incompatibility
> with some (new) version of GCC. If so, please mail me !
Well, probably I can - changing the size to the real size (which is 32MB
instead of 128) - u-boot boots up to the prompt. Probably some memory
test addressed memory above 32MB. So it works now.
Regarding the version of gcc, I use
ppc_405-gcc (GCC) 3.3.1 (MontaVista 3.3.1-3.0.10.0300532 2003-12-24)

Thanks for your helpfull hint!

Best regards,

Thorsten L?ck

- --
IfEN - Gesellschaft f?r Satellitennavigation mbH

  Dipl. Ing. Thorsten L?ck
  Tel.:  +49 8121 2238-25
  Fax :  +49 8121 2238-11
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)

iD8DBQFCy3+kQDwjNlk95KYRAiMaAKDgp7miMmBTrdYvuQiTmv22J0ChhQCgr2bs
+nJ4OJ7toS1avTRJ8YxkZp4=
=cSLW
-----END PGP SIGNATURE-----