From: Micheal Marineau <marineam@engr.orst.edu>
To: linux-kernel@vger.kernel.org
Subject: [PATCH][help?] Radeonfb acpi resume
Date: Sun, 10 Jul 2005 15:19:13 -0700 [thread overview]
Message-ID: <42D19EE1.90809@engr.orst.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 5215 bytes --]
I've been forward porting this patch for a while now and need
some input on it. You can see the last time someone posted it
to the list here:
http://www.ussg.iu.edu/hypermail/linux/kernel/0410.0/0600.html
The big issue mentioned in that thread, that it reqires a key
press during the resume process to keep going still exists and
I have been unable to understand why. The issue is in radeon_pm.c
in this block that follows the last hunk of the diff:
if (rinfo->no_schedule) {
if (try_acquire_console_sem())
return 0;
} else
acquire_console_sem();
Specificly it's acquire_console_sem(); where the resume stops waiting
for a key press. What could be stopping things?
btw, I also have a suspend2 friendly version of the patch:
http://dev.gentoo.org/~marineam/files/patch-radeonfb-2.6.12-suspend2
diff -ru linux-2.6.12.orig/arch/i386/kernel/acpi/sleep.c
linux-2.6.12/arch/i386/kernel/acpi/sleep.c
--- linux-2.6.12.orig/arch/i386/kernel/acpi/sleep.c 2005-06-17
12:48:29.000000000 -0700
+++ linux-2.6.12/arch/i386/kernel/acpi/sleep.c 2005-07-03
18:01:34.000000000 -0700
@@ -5,6 +5,7 @@
* Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
*/
+#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/bootmem.h>
#include <asm/smp.h>
@@ -55,6 +56,31 @@
zap_low_mappings();
}
+/*
+ * acpi_vgapost
+ */
+
+extern void do_vgapost_lowlevel (unsigned long);
+
+void acpi_vgapost (unsigned long slot)
+{
+ unsigned long flags, saved_video_flags = acpi_video_flags;
+ acpi_video_flags = (slot & 0xffff) << 16 | 1;
+ /* Map low memory and copy information */
+ init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
+ memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end -
&wakeup_start);
+ acpi_copy_wakeup_routine(acpi_wakeup_address);
+ /* Tunnel thru real mode */
+ local_irq_save(flags);
+ do_vgapost_lowlevel(acpi_wakeup_address);
+ local_irq_restore(flags);
+ /* Restore mapping etc */
+ zap_low_mappings();
+ acpi_video_flags = saved_video_flags;
+}
+
+EXPORT_SYMBOL (acpi_vgapost);
+
/**
* acpi_reserve_bootmem - do _very_ early ACPI initialisation
*
diff -ru linux-2.6.12.orig/arch/i386/kernel/acpi/wakeup.S
linux-2.6.12/arch/i386/kernel/acpi/wakeup.S
--- linux-2.6.12.orig/arch/i386/kernel/acpi/wakeup.S 2005-06-17
12:48:29.000000000 -0700
+++ linux-2.6.12/arch/i386/kernel/acpi/wakeup.S 2005-07-03
18:01:34.000000000 -0700
@@ -170,6 +170,32 @@
_setbad: jmp setbad
+#
+# Real mode switch - verbatim from reboot.c
+#
+go_real:
+ movl %cr0, %eax
+ andl $0x00000011, %eax
+ orl $0x60000000, %eax
+ movl %eax, %cr0
+ movl %eax, %cr3
+ movl %cr0, %ebx
+ andl $0x60000000, %ebx
+ jz 1f
+ wbinvd
+1: andb $0x10, %al
+ movl %eax, %cr0
+go_real_jmp: .byte 0xea
+go_real_jmp_off: .word 0x0000
+go_real_jmp_seg: .word 0x0000
+#
+# Real mode descriptor table
+#
+ .align 8
+go_real_desc: .quad 0x0000000000000000
+go_real_cseg: .quad 0x00009a000000ffff
+go_real_dseg: .quad 0x000092000000ffff
+
.code32
ALIGN
@@ -309,6 +335,59 @@
call acpi_enter_sleep_state_s4bios
ret
+ENTRY(do_vgapost_lowlevel)
+ # Convert target offset to physical address
+ movl %eax, %ecx
+ subl $__PAGE_OFFSET, %ecx
+ # Fixup GDT pointer
+ movl %ecx, %edx
+ addl $go_real_desc - wakeup_start, %edx
+ movl %edx, go_real_gdt + 2
+ # Fixup 16-bit CS descriptor
+ movl %ecx, %edx
+ movw %dx, go_real_cseg - wakeup_start + 2 (%eax)
+ shrl $16, %edx
+ movb %dl, go_real_cseg - wakeup_start + 4 (%eax)
+ movb %dh, go_real_cseg - wakeup_start + 7 (%eax)
+ # Fixup 16-bit jump
+ movl %ecx, %edx
+ shrl $4, %edx
+ movw %dx, go_real_jmp_seg - wakeup_start (%eax)
+ # Save state and registers
+ call save_processor_state
+ call save_registers
+ # Reload page table with low mapping
+ movl $swapper_pg_dir-__PAGE_OFFSET, %eax
+ movl %eax, %cr3
+ # Load IDTR and GDTR for real mode
+ lidt go_real_idt
+ lgdt go_real_gdt
+ # Load DS & al
+ movl $0x0010, %eax
+ movl %eax, %ss
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ # Load CS
+ call $0x0008, $(go_real - wakeup_start)
+ # Phony return code
+ call restore_registers
+ call restore_processor_state
+ ret
+
+ .align 4
+ .word 0
+go_real_idt:
+ .word 0x3ff
+ .long 0
+
+ .align 4
+ .word 0
+go_real_gdt:
+ .word 3*8-1
+ .long 0
+
ALIGN
# saved registers
saved_gdt: .long 0,0
diff -ru linux-2.6.12.orig/drivers/video/aty/radeon_pm.c
linux-2.6.12/drivers/video/aty/radeon_pm.c
--- linux-2.6.12.orig/drivers/video/aty/radeon_pm.c 2005-06-17
12:48:29.000000000 -0700
+++ linux-2.6.12/drivers/video/aty/radeon_pm.c 2005-07-03
19:55:36.000000000 -0700
@@ -2606,10 +2606,13 @@
done:
pdev->dev.power.power_state = state;
+ pci_save_state (pdev);
return 0;
}
+extern void acpi_vgapost (unsigned long slot);
+
int radeonfb_pci_resume(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
@@ -2619,6 +2622,12 @@
if (pdev->dev.power.power_state == 0)
return 0;
+ if (pdev->dev.power.power_state != 4)
+ {
+ pci_restore_state (pdev);
+ acpi_vgapost (pdev->devfn);
+ }
+
if (rinfo->no_schedule) {
if (try_acquire_console_sem())
return 0;
--
Michael Marineau
marineam@engr.orst.edu
Oregon State University
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]
next reply other threads:[~2005-07-10 22:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-10 22:19 Micheal Marineau [this message]
2005-07-10 22:23 ` [PATCH][help?] Radeonfb acpi resume Micheal Marineau
2005-07-11 15:11 ` Pavel Machek
2005-07-11 18:50 ` Micheal Marineau
2005-07-11 18:56 ` Pavel Machek
2005-07-12 4:32 ` Micheal Marineau
[not found] ` <E1DsHSJ-0006kr-00@chiark.greenend.org.uk>
2005-07-12 13:39 ` Micheal Marineau
2005-07-13 0:32 ` Benjamin Herrenschmidt
2005-07-13 5:31 ` Micheal Marineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42D19EE1.90809@engr.orst.edu \
--to=marineam@engr.orst.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.