From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michele Cerioni <michele@protocol.it>
Date: Fri, 15 Jul 2005 11:06:53 +0000
Subject: Re: [LARTC] Problems with table
Message-Id: <42D798CD.5080508@protocol.it>
List-Id: <lartc.vger.kernel.org>
References: <42D7949E.9090704@protocol.it>
In-Reply-To: <42D7949E.9090704@protocol.it>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Sorry.
My kernel was not able  to perform policy routing in the correct way.

Michele

Michele Cerioni wrote:
> hi,
> I have problems with tables.
> I installed the last iproute2: iproute2-2.4.7-now-ss010824.tar.gz on 
> Linux 2.4.26 (slackware 9.1).
> 
> I want to use 2 adsl on this server.
> I run this command:
> #echo 201 routeradsl2 >> /etc/iproute2/rt_tables (only one time);
> then
> 
> #ip route add  82.189.148.240 dev eth1 src 82.189.148.243 table routeradsl2
> 
> at this point I run:
> 
> #ip route show table routeradsl2
> #
> 
> the table is routeradsl2 empty
> 
> then I run
> #ip route show table main
> 82.189.148.240 dev eth1  scope link  src 82.189.148.243
> 82.189.148.240/29 dev eth1  proto kernel  scope link  src 82.189.148.243
> 194.243.125.0/26 dev eth0  proto kernel  scope link  src 194.243.125.10
> 194.243.125.0/24 dev eth0  proto kernel  scope link  src 194.243.125.4
> 127.0.0.0/8 dev lo  scope link
> default via 194.243.125.1 dev eth0  metric 1
> 
> The line  82.189.148.240 dev eth1  scope link  src 82.189.148.243 was 
> added to table main instead table routeradls2.
> 
> Why?
> 
> MIchele
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> 
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc