From mboxrd@z Thu Jan 1 00:00:00 1970 From: sampei02@tiscali.it Subject: Re: UDMA modes Date: Tue, 16 Aug 2005 16:21:04 +0200 Message-ID: <42D7AAB8000479BA@mail-4.mail.tiscali.sys> References: <1124183117.5550.58.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mrqout1.tiscali.it ([195.130.225.11]:9143 "EHLO mrqout1.tiscali.it") by vger.kernel.org with ESMTP id S965245AbVHPOVQ convert rfc822-to-8bit (ORCPT ); Tue, 16 Aug 2005 10:21:16 -0400 In-Reply-To: <1124183117.5550.58.camel@localhost.localdomain> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Erik Slagter Cc: linux-ide@vger.kernel.org My Maxtor Hard Disk supports UDMA <=3D 6 (133) How can I control BITS options in controller ? What's line command ? How can I verify controller is properly configured in my kernel ? >-- Messaggio Originale -- >Subject: Re: UDMA modes >From: Erik Slagter >To: sampei02@tiscali.it >Cc: linux-ide@vger.kernel.org >Date: Tue, 16 Aug 2005 11:05:17 +0200 > > >On Tue, 2005-08-16 at 09:02 +0200, sampei02@tiscali.it wrote: >> I have motherboard which supports DMA ATA 66/100/133 and I connect H= D with >> new 80-wire cable. >> I have FC3 with Kernel 2.6.9 >> With hdparm -i /dev/hda I get: >>=20 >> DMA modes: udma0 udma1 udma2 >> UDMA modes: udma0 udma1 *udma2 >>=20 >> Why udma is 2 and not udma 5 ? > >Controller not explicitly supported by linux or not configured in the >kernel? Controller needs BITS option? (see IDE config). Harddisk doesn= 't >support > udma2? > >Allegato: signature.asc > __________________________________________________________________ TISCALI ADSL 1.25 MEGA Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Tele= com a partire da 19,95 Euro/mese. Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI. http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/