From: Karim Yaghmour <karim@opersys.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Weird USB errors on HD
Date: Tue, 19 Jul 2005 12:47:32 -0400 [thread overview]
Message-ID: <42DD2EA4.5040507@opersys.com> (raw)
I have a usb-attached HD that I use from time to time. When it's connected
to my desktop through a hub it works flawlessly. When connected to my Dell
D600 Laptop, however, it sometimes randomly exhibits a loud click (as if the
heads went berzerk) and the device goes unrecognized (i.e. the USB layer drops
the device and then redetects it again; meanwhile there is FS corruption.)
The same behavior happens with 2.4.x and 2.6.x
In /var/log/messages I see something like:
hub 3-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 3
...
usb 1-3: USB disconnect, address 2
usb 1-3: new high speed USB device using ehci_hcd and address 3
...
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
This doesn't seem too good.
Here's the complete passage from /var/log/messages:
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 384296
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 384296
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 384296
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 384296
EXT3-fs error (device sda): ext3_free_branches: Read failure, inode=1046532, block=48037
Aborting journal on device sda.
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 4176
printk: 813 messages suppressed.
Buffer I/O error on device sda, logical block 522
lost page write due to I/O error on sda
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: Journal has aborted
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: Journal has aborted
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_orphan_del: Journal has aborted
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_truncate: Journal has aborted
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
ext3_abort called.
EXT3-fs error (device sda): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254080
hub 3-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 3
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254088
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254096
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254104
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254088
SCSI error : <0 0 0 0> return code = 0x70000
end_request: I/O error, dev sda, sector 3254088
usb 1-3: USB disconnect, address 2
scsi0 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda, logical block 458754
lost page write due to I/O error on sda
scsi0 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda, logical block 517070
lost page write due to I/O error on sda
scsi0 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda, logical block 1
lost page write due to I/O error on sda
scsi0 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda, logical block 393218
lost page write due to I/O error on sda
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
usb 1-3: new high speed USB device using ehci_hcd and address 3
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #196225 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #196225 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #277985 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #1046529 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #228929 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #196225 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #212577 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #212577 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #196225 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #163521 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #163521 offset 0
Vendor: FUJITSU Model: MHT2040AT Rev: 0022
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
sdb: assuming drive cache: write through
SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
sdb: assuming drive cache: write through
sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #163521 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_find_entry: reading directory #163521 offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_readdir: directory #2 contains a hole at offset 0
scsi0 (0:0): rejecting I/O to dead device
EXT3-fs error (device sda): ext3_readdir: directory #2 contains a hole at offset 0
scsi0 (0:0): rejecting I/O to dead device
printk: 5 messages suppressed.
Buffer I/O error on device sda, logical block 522
lost page write due to I/O error on sda
usb 1-3: USB disconnect, address 3
usb 1-3: new high speed USB device using ehci_hcd and address 4
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: FUJITSU Model: MHT2040AT Rev: 0022
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming drive cache: write through
sda: unknown partition table
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-3: USB disconnect, address 4
Any chances someone has seen this before or if there's something I can do
to stop this from happening anymore?
Thanks,
Karim
--
Author, Speaker, Developer, Consultant
Pushing Embedded and Real-Time Linux Systems Beyond the Limits
http://www.opersys.com || karim@opersys.com || 1-866-677-4546
next reply other threads:[~2005-07-19 16:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-19 16:47 Karim Yaghmour [this message]
2005-07-19 19:29 ` Weird USB errors on HD Greg KH
2005-07-19 19:27 ` Karim Yaghmour
2005-07-19 19:40 ` Greg KH
2005-07-19 20:16 ` Lee Revell
2005-07-19 20:29 ` Greg KH
2005-07-20 14:53 ` Alistair John Strachan
2005-07-26 2:16 ` Karim Yaghmour
[not found] <4s3BX-8X-7@gated-at.bofh.it>
[not found] ` <4s66H-2ai-21@gated-at.bofh.it>
[not found] ` <4s66H-2ai-19@gated-at.bofh.it>
2005-07-27 2:34 ` Robert Hancock
2005-07-27 3:31 ` Grant Coady
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42DD2EA4.5040507@opersys.com \
--to=karim@opersys.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.