From: John Otken <jotken@softadvances.com>
To: linuxppc-embedded@ozlabs.org
Subject: [PATCH] Support 440EP On-Chip OHCI USB Host Controller
Date: Tue, 26 Jul 2005 16:41:40 -0500 [thread overview]
Message-ID: <42E6AE14.9000206@softadvances.com> (raw)
This patch adds support for the AMCC 440EP on-chip OHCI USB host controller. I tested it on the Bamboo and Yosemite boards using the 2.6.12 kernel.
This patch depends on Wade Farnsworth's "PPC440EP SoC and Bamboo board support" patch from 2005-04-07 and my "fix invalid function name usb_hcd_put in ohci-ppc-soc.c" patch from 2005-07-20:
http://patchwork.ozlabs.org/linuxppc/patch?id=1311
http://patchwork.ozlabs.org/linuxppc/patch?id=1803
Comments are welcome.
(This is a repost. My email host has had problems.)
Signed-off-by: John Otken <jotken@softadvances.com>
diff -uprN b/arch/ppc/platforms/4xx/bamboo.c c/arch/ppc/platforms/4xx/bamboo.c
--- b/arch/ppc/platforms/4xx/bamboo.c 2005-07-24 16:14:36.000000000 -0500
+++ c/arch/ppc/platforms/4xx/bamboo.c 2005-07-25 06:34:52.498441038 -0500
@@ -431,5 +431,7 @@ void __init platform_init(unsigned long
#ifdef CONFIG_KGDB
ppc_md.early_serial_map = bamboo_early_serial_map;
#endif
+
+ SDR_WRITE( 0x320, 1 ); /* little endian usb (SDR0_USB0) */
}
diff -uprN b/arch/ppc/platforms/4xx/ibm440ep.c c/arch/ppc/platforms/4xx/ibm440ep.c
--- b/arch/ppc/platforms/4xx/ibm440ep.c 2005-07-24 16:14:36.000000000 -0500
+++ c/arch/ppc/platforms/4xx/ibm440ep.c 2005-07-24 18:00:38.000000000 -0500
@@ -187,3 +187,44 @@ struct ppc4xx_uic_settings ppc4xx_core_u
},
};
+static struct resource ohci_usb_resources[] = {
+ [0] = {
+ .start = 0x0EF601000,
+ .end = 0x0EF601000 + 0x80 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 40,
+ .end = 40,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 dma_mask = 0xffffffffULL;
+
+#include <asm/usb.h>
+
+static struct usb_hcd_platform_data platform_data;
+
+static struct platform_device ohci_usb_device = {
+ .name = "ppc-soc-ohci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ohci_usb_resources),
+ .resource = ohci_usb_resources,
+ .dev = {
+ .dma_mask = &dma_mask,
+ .coherent_dma_mask = 0xffffffffULL,
+ .platform_data = &platform_data,
+ }
+};
+
+static struct platform_device *ibm440ep_devs[] __initdata = {
+ &ohci_usb_device,
+};
+
+static int __init
+ ibm440ep_platform_add_devices(void)
+{
+ return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
+}
+arch_initcall(ibm440ep_platform_add_devices);
diff -uprN b/drivers/usb/host/Kconfig c/drivers/usb/host/Kconfig
--- b/drivers/usb/host/Kconfig 2005-07-14 09:48:19.000000000 -0500
+++ c/drivers/usb/host/Kconfig 2005-07-24 18:00:38.000000000 -0500
@@ -68,7 +68,7 @@ config USB_OHCI_HCD
config USB_OHCI_HCD_PPC_SOC
bool "OHCI support for on-chip PPC USB controller"
- depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx || 440EP)
default y
select USB_OHCI_BIG_ENDIAN
---help---
@@ -92,7 +92,7 @@ config USB_OHCI_BIG_ENDIAN
config USB_OHCI_LITTLE_ENDIAN
bool
depends on USB_OHCI_HCD
- default n if STB03xxx || PPC_MPC52xx
+ default n if STB03xxx || PPC_MPC52xx || 440EP
default y
config USB_UHCI_HCD
diff -uprN b/include/asm-ppc/usb.h c/include/asm-ppc/usb.h
--- b/include/asm-ppc/usb.h 1969-12-31 17:00:00.000000000 -0700
+++ c/include/asm-ppc/usb.h 2005-07-24 18:00:38.000000000 -0500
@@ -0,0 +1,13 @@
+/*
+ * ppc/usb.h:
+ *
+ */
+#ifndef _PPC_USB_H
+#define _PPC_USB_H
+
+struct usb_hcd_platform_data {
+ int (*start) (struct platform_device *pdev);
+ void (*stop) (struct platform_device *pdev);
+};
+
+#endif /* !(_PPC_USB_H) */
next reply other threads:[~2005-07-26 21:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-26 21:41 John Otken [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-25 12:04 [PATCH] Support 440EP On-Chip OHCI USB Host Controller John Otken
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42E6AE14.9000206@softadvances.com \
--to=jotken@softadvances.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.