All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Clark <stephen.clark@earthlink.net>
To: "Yuan, Hang" <hang.yuan@intel.com>
Cc: sclark46@earthlink.net, alsa-devel@lists.sourceforge.net
Subject: Re: 2.6.12 sound problem
Date: Fri, 29 Jul 2005 08:41:42 -0400	[thread overview]
Message-ID: <42EA2406.5000103@earthlink.net> (raw)
In-Reply-To: <4811572DEBA3F04E9E6C269B321042650105FE8A@bjsmsx402.ccr.corp.intel.com>

Yuan, Hang wrote:

>-----Original Message-----
>From: alsa-devel-admin@lists.sourceforge.net [mailto:alsa-devel-admin@lists.sourceforge.net] On Behalf Of Stephen Clark
>Sent: 2005Äê7ÔÂ28ÈÕ 22:12
>To: alsa-devel@lists.sourceforge.net
>Subject: Re: [Alsa-devel] 2.6.12 sound problem
>
>Stephen Clark wrote:
>
>  
>
>>Hello List,
>>
>>
>>I recently upgraded my laptop, HP Pavilion N5430, from a 2.4.21 kernel
>>to 2.6.12. As a result of
>>doing this my sound no longer works correctly. It plays the same thing
>>repeatedly some number
>>of times - if it plays at all.
>>
>>Any ideas on how to debug this would be appreciated.
>>
>>Additional info I don't see any interrupts in /proc/interrupts for the 
>>Allegro which is on int 5.
>>I just tried the same laptop with knoppix and a 2.4.27 kernel and sound 
>>works great and I do
>>see interrupts for Allegro on int 5.
>>
>>
>>Thanks,
>>Steve
>>
>>aplay -v and aadebug output follow.
>>
>>root@joker4 ~]# aplay -v /usr/share/apps/kget/sounds/started.wav
>>Playing WAVE '/usr/share/apps/kget/sounds/started.wav' : Unsigned 8 bit,
>>Rate 11128 Hz,Mono
>>Plug PCM: Hardware PCM card 0 'ESS Allegro PCI' device 0 subdevice 1
>>
>>Its setup is:
>>stream       : PLAYBACK
>>access       : RW_INTERLEAVED
>>format       : U8
>>subformat    : STD
>>channels     : 1
>>rate         : 11128
>>exact rate   : 11128 (11128/1)
>>msbits       : 8
>>buffer_size  : 5564
>>period_size  : 1391
>>period_time  : 125000
>>tick_time    : 1000
>>tstamp_mode  : NONE
>>period_step  : 1
>>sleep_min    : 0
>>avail_min    : 1391
>>xfer_align   : 1391
>>start_threshold  : 5564
>>stop_threshold   : 5564
>>silence_threshold: 0
>>silence_size : 0
>>boundary     : 1458569216
>>aplay: pcm_write:1171: write error: Input/output error
>>
>>aadebug output:
>>ALSA Audio Debug v0.0.9 - Mon Jul 25 14:49:10 EDT 2005
>>http://alsa.opensrc.org/?page=aadebug
>>
>>Kernel ----------------------------------------------------
>>Linux joker4.seclark.com 2.6.12-prep #1 Sun Jul 24 22:39:46 EDT 2005
>>i686 athlon i386 GNU/Linux
>>
>>Loaded Modules --------------------------------------------
>>snd_maestro3           25252  2
>>snd_ac97_codec         76408  1 snd_maestro3
>>snd_seq_dummy           3972  0
>>snd_seq_oss            37760  0
>>snd_seq_midi_event      9600  1 snd_seq_oss
>>snd_seq                62992  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>>snd_seq_device          9228  3 snd_seq_dummy,snd_seq_oss,snd_seq
>>snd_pcm_oss            51760  0
>>snd_mixer_oss          18304  1 snd_pcm_oss
>>snd_pcm               100744  4 snd_maestro3,snd_ac97_codec,snd_pcm_oss
>>snd_timer              33924  2 snd_seq,snd_pcm
>>snd_page_alloc         10116  1 snd_pcm
>>snd                    57860  12
>>snd_maestro3,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>>
>>Modprobe Conf ---------------------------------------------
>>alias snd-card-0 snd-maestro3
>>options snd-card-0 index=0
>>options snd-maestro3 index=0
>>remove snd-maestro3 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
>>}; /sbin/modprobe -r --ignore-remove snd-maestro3
>>
>>Proc Asound -----------------------------------------------
>>Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24
>>10:33:392005 UTC).
>>0 [PCI            ]: Allegro - ESS Allegro PCI
>>                      ESS Allegro PCI at 0x1400, irq 5
>>   1:       : sequencer
>>  16: [0- 0]: digital audio playback
>>  24: [0- 0]: digital audio capture
>>   0: [0- 0]: ctl
>>  33:       : timer
>>00-00: Allegro : Allegro : playback 2 : capture 1
>>
>>Dev Snd ---------------------------------------------------
>>controlC0  pcmC0D0c  pcmC0D0p  seq  timer
>>
>>CPU -------------------------------------------------------
>>model name      : mobile AMD Duron(tm) Processor
>>cpu MHz         : 299.999
>>
>>RAM -------------------------------------------------------
>>MemTotal:       255652 kB
>>SwapTotal:      524280 kB
>>
>>Hardware --------------------------------------------------
>>00:00.0 Host bridge: ALi Corporation M1647 Northbridge [MAGiK 1 /
>>MobileMAGiK 1] (rev 04)
>>00:08.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1
>>(rev 12)
>>
>> 
>>
>>    
>>
>I've downloaded the latest alsa 1.09rc4a and tried it with no success. 
>Is there anything I can do
>to further troubleshoot this. I configured the sw --with-debug=full but 
>didn't see any additional output.
>I am willing to get my hands dirty if someone will give me some 
>direction. This laptop is used by my teenage daughter and she has to 
>have sound ;).
>
>Steve
>
>Is the kernel in UP mode? If so, try SMP mode or enable "local APIC support", "I/O APIC support" and re-build UP kernel. I met the similar problem like you described and no interrupts were reported in /proc/interrupts. I don't know the exact reason. But the workaround above can solve the problem. Hope this method can also help you.
>
>- Henry
>
>  
>
Thanks Henry,

I'll give it a try and report back my result. I am in the process of 
switching from FC4 to gentoo, ( gentoo still supports 2.4 ).

Steve


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf

  reply	other threads:[~2005-07-29 12:41 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-07-29 10:21 2.6.12 sound problem Yuan, Hang
2005-07-29 12:41 ` Stephen Clark [this message]
2005-07-30  3:05   ` Stephen Clark
  -- strict thread matches above, loose matches on Subject: below --
2005-08-01  3:06 Yuan, Hang
2005-07-26 23:35 Stephen Clark
2005-07-27  4:23 ` Lee Revell
2005-07-27 15:31   ` Stephen Clark
2005-07-27  8:26 ` Takashi Iwai
2005-07-27 15:31   ` Stephen Clark
2005-07-29  8:41     ` Andrew Morton
2005-07-30  3:13       ` Stephen Clark
2005-07-30 15:56         ` Stephen Clark
2005-07-26 23:34 Stephen Clark
2005-07-27  7:14 ` Jaroslav Kysela
2005-07-28 14:05   ` Stephen Clark
2005-07-28 14:11 ` Stephen Clark
2005-07-26 17:08 Stephen Clark
2005-07-25 19:16 Stephen Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=42EA2406.5000103@earthlink.net \
    --to=stephen.clark@earthlink.net \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=hang.yuan@intel.com \
    --cc=sclark46@earthlink.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.