From: Michael Thonke <iogl64nx@gmail.com>
To: Alexander Fieroch <fieroch@web.de>
Cc: linux-kernel@vger.kernel.org, Jesper Juhl <jesper.juhl@gmail.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
bzolnier@gmail.com, axboe@suse.de,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
Alexey Dobriyan <adobriyan@gmail.com>,
Natalie.Protasevich@UNISYS.com, Andrew Morton <akpm@osdl.org>
Subject: Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"
Date: Sat, 30 Jul 2005 00:57:42 +0000 [thread overview]
Message-ID: <42EAD086.4010904@gmail.com> (raw)
In-Reply-To: <42EAAFD4.4010303@web.de>
Alexander Fieroch schrieb:
> Andrew Morton wrote:
> > Is 2.6.13-rc4 running OK? If not, please cc linux-kernel on the
> reply and
> > re-summarise the problem, thanks.
>
> Same problems as before occur in kernel 2.6.13rc4, too.
>
> I've attached the syslog with kernel parameters "acpi=debug pci=routeirq
> apic=debug".
>
> Regards,
> Alexander
>
>------------------------------------------------------------------------
>
> CPU0 CPU1
> 0: 56856 0 IO-APIC-edge timer
> 1: 147 0 IO-APIC-edge i8042
> 7: 0 0 IO-APIC-edge parport0
> 8: 0 0 IO-APIC-edge rtc
> 9: 0 0 IO-APIC-level acpi
> 10: 0 0 IO-APIC-edge MPU401 UART
>169: 497 0 IO-APIC-level skge, uhci_hcd:usb5, HDA Intel
>177: 0 0 IO-APIC-level Ensoniq AudioPCI
>185: 274 0 IO-APIC-level ide2, ide3, ehci_hcd:usb1, uhci_hcd:usb2
>193: 3920 0 IO-APIC-level libata, uhci_hcd:usb3
>201: 900000 0 IO-APIC-level ide0, uhci_hcd:usb4
>209: 5 0 IO-APIC-level bttv0, ohci1394
>NMI: 52 1
>LOC: 55103 55092
>ERR: 1
>MIS: 0
>
>
>
>------------------------------------------------------------------------
>
>
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: irq 201: nobody cared (try booting with the "irqpoll" option)
>Jul 29 12:42:37 orclex kernel:
>Jul 29 12:42:37 orclex kernel: Call Trace: <IRQ> <ffffffff80156e67>{__report_bad_irq+48} <ffffffff80156f60>{note_interrupt+144}
>Jul 29 12:42:37 orclex kernel: <ffffffff8015678b>{__do_IRQ+237} <ffffffff80110715>{do_IRQ+67}
>Jul 29 12:42:37 orclex kernel: <ffffffff8010e051>{ret_from_intr+0} <EOI> <ffffffff8016ac7f>{find_vma+22}
>Jul 29 12:42:37 orclex kernel: <ffffffff8011ecfe>{do_page_fault+409} <ffffffff801389c6>{do_wait+830}
>Jul 29 12:42:37 orclex kernel: <ffffffff801300a5>{default_wake_function+0} <ffffffff8010e4dd>{error_exit+0}
>Jul 29 12:42:37 orclex kernel:
>Jul 29 12:42:37 orclex kernel: handlers:
>Jul 29 12:42:37 orclex kernel: [<ffffffff8031c835>] (ide_intr+0x0/0x17a)
>Jul 29 12:42:37 orclex kernel: [<ffffffff803615f5>] (usb_hcd_irq+0x0/0x68)
>Jul 29 12:42:37 orclex kernel: Disabling IRQ #201
>Jul 29 12:42:37 orclex kernel: scsi: unknown opcode 0x85
>Jul 29 12:42:37 orclex lpd[4513]: restarted
>Jul 29 12:42:38 orclex nmbd[4523]: [2005/07/29 12:42:38, 0, pid=4523] nmbd/asyncdns.c:start_async_dns(149)
>Jul 29 12:42:38 orclex nmbd[4523]: started asyncdns process 4524
>Jul 29 12:42:38 orclex smartd[4530]: smartd version 5.32 Copyright (C) 2002-4 Bruce Allen
>Jul 29 12:42:38 orclex smartd[4530]: Home page is http://smartmontools.sourceforge.net/
>Jul 29 12:42:38 orclex smartd[4530]: Opened configuration file /etc/smartd.conf
>Jul 29 12:42:38 orclex smartd[4530]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf
>Jul 29 12:42:38 orclex smartd[4530]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>Jul 29 12:42:38 orclex smartd[4530]: Device: /dev/hda, opened
>Jul 29 12:42:47 orclex kernel: hda: lost interrupt
>Jul 29 12:42:47 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:47 orclex smartd[4530]: Device: /dev/hda, found in smartd database.
>Jul 29 12:42:48 orclex hddtemp[4508]: /dev/hda: IC35L060AVV207-0: 36 C
>Jul 29 12:42:48 orclex kernel: irq 201: nobody cared (try booting with the "irqpoll" option)
>Jul 29 12:42:48 orclex kernel:
>Jul 29 12:42:48 orclex kernel: Call Trace: <IRQ> <ffffffff80156e67>{__report_bad_irq+48} <ffffffff80156f60>{note_interrupt+144}
>Jul 29 12:42:48 orclex kernel: <ffffffff8015678b>{__do_IRQ+237} <ffffffff80110715>{do_IRQ+67}
>Jul 29 12:42:48 orclex kernel: <ffffffff8010e051>{ret_from_intr+0} <EOI> <ffffffff8010daae>{system_call+126}
>Jul 29 12:42:48 orclex kernel:
>Jul 29 12:42:48 orclex kernel: handlers:
>Jul 29 12:42:48 orclex kernel: [<ffffffff8031c835>] (ide_intr+0x0/0x17a)
>Jul 29 12:42:48 orclex kernel: [<ffffffff803615f5>] (usb_hcd_irq+0x0/0x68)
>Jul 29 12:42:48 orclex kernel: Disabling IRQ #201
>Jul 29 12:42:58 orclex kernel: hda: lost interrupt
>Jul 29 12:42:58 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:59 orclex smartd[4530]: Device: /dev/hda, is SMART capable. Adding to "monitor" list.
>Jul 29 12:42:59 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>
>
Hello Alexander,
do you run
A.) SATA in Enhanced Mode
B.) SATA+PATA or PATA operation mode?
This problem I can reproduce when I set A.)+B.) in bios I
exactly get the same behavior of confused cd - drives.
Greets
Best regards
Michael
next prev parent reply other threads:[~2005-07-29 22:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-18 22:24 [2.6.12rc4] PROBLEM: "drive appears confused" and "irq 18: nobody cared!" Alexander Fieroch
2005-05-27 19:30 ` Alexander Fieroch
2005-05-28 0:16 ` Andrew Morton
2005-05-29 20:18 ` Alexander Fieroch
2005-06-14 8:04 ` Bartlomiej Zolnierkiewicz
2005-06-15 20:39 ` Alexander Fieroch
2005-06-15 21:30 ` Andrew Morton
2005-06-16 22:23 ` Alan Cox
2005-06-16 23:52 ` Bartlomiej Zolnierkiewicz
2005-06-17 10:49 ` Alexander Fieroch
2005-06-17 12:38 ` Alan Cox
2005-06-17 17:05 ` Alexander Fieroch
2005-06-17 17:17 ` Jesper Juhl
[not found] ` <42C0953B.8000506@web.de>
2005-06-28 13:47 ` Alan Cox
2005-08-04 20:25 ` Andrew Morton
2005-08-05 10:19 ` Alan Cox
2005-06-29 13:47 ` Alexander Fieroch
2005-07-06 10:17 ` Alexander Fieroch
2005-07-29 22:38 ` Alexander Fieroch
2005-07-30 0:57 ` Michael Thonke [this message]
2005-07-29 23:05 ` Parag Warudkar
2005-07-30 1:42 ` Alexey Dobriyan
2005-08-01 14:38 ` Alexander Fieroch
2005-08-01 14:56 ` Alexander Fieroch
2005-08-01 19:23 ` Krzysztof Halasa
2005-08-01 19:28 ` Bartlomiej Zolnierkiewicz
2005-08-09 17:28 ` Alexander Fieroch
2005-08-09 22:14 ` Alan Cox
2005-08-19 11:12 ` Alexander Fieroch
2005-07-31 22:15 ` Alexander Fieroch
2005-07-06 10:19 ` Alexander Fieroch
2005-06-17 11:29 ` [2.6.12rc4] " Alexander Fieroch
2005-06-13 17:59 ` Alexander Fieroch
-- strict thread matches above, loose matches on Subject: below --
2005-07-06 15:33 Protasevich, Natalie
2005-07-06 23:20 ` Alexander Fieroch
2005-07-11 5:35 Protasevich, Natalie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42EAD086.4010904@gmail.com \
--to=iogl64nx@gmail.com \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=Natalie.Protasevich@UNISYS.com \
--cc=adobriyan@gmail.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=axboe@suse.de \
--cc=bzolnier@gmail.com \
--cc=fieroch@web.de \
--cc=jesper.juhl@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.