From: Daniel Walter <walter@mbo.de>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: ReiserFS crashing
Date: Wed, 03 Aug 2005 13:43:42 +0200 [thread overview]
Message-ID: <42F0ADEE.7020405@mbo.de> (raw)
Acessing the (software-)raid1 results in crash of shell
raid worked ok for some days before
error message appeared upon first hangup:
Linux version 2.6.11.10BERNHADINERMBO.DE (root@shepard) (gcc version
3.3.4) #3 Fri Jul 15 11:53:00 CEST 2005
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2690 0x0 SD], item_len 492, item_location 3836,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2691 0x0 SD], item_len 3628, item_location 3836,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item length seems wrong: *3.6* [2 2694 0x0
SD], item_len 28716, item_location 3836, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item length seems wrong: *3.6* [2 2701 0x0
SD], item_len 32812, item_location 3839, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [2 2702 0x0 SD], item_len 44, item_location 3516,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong: *3.6* [2709 2714
0x0 SD], item_len 44, item_location 32144, free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.6* [27092714 0x0 SD], item_len 47, item_location 3472,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
ReiserFS: warning: is_leaf: item location seems wrong (second one):
*3.5*[2709 2713 0x0 SD], item_len 44, item_location 3532,
free_space(entry_count) 65535
ReiserFS: md0: warning: vs-5150: search_by_key: invalid format found in
block 720896. Fsck?
------------[ cut here ]------------
kernel BUG at fs/reiserfs/journal.c:494!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in:
CPU: 0
EIP: 0060:[<c01ac802>] Not tainted VLI
EFLAGS: 00010286 (2.6.11.10BERNHADINERMBO.DE)
EIP is at reiserfs_in_journal+0x132/0x1a0
eax: e0935148 ebx: 000e0000 ecx: 00000cc8 edx: e0914000
esi: df065c00 edi: e0914104 ebp: 00000000 esp: de11fbc4
ds: 007b es: 007b ss: 0068
Process cp (pid: 6771, threadinfo=de11f000 task=cdeb7ac0)
Stack: df065c00 de11fc50 00000000 e0914000 00000000 e09120e0 df065c00
de11fc50
c01894cd df065c00 0000001c 00000000 00000001 de11fc04 00000000
00000000
00000000 0000001c df065c00 de11fc50 00000000 c01897b2 de11feb4
0000001c
Call Trace:
[<c01894cd>] scan_bitmap_block+0x28d/0x320
[<c01897b2>] scan_bitmap+0x162/0x280
[<c018aa4a>] reiserfs_allocate_blocknrs+0x18a/0x4f0
[<c019747e>] reiserfs_allocate_blocks_for_region+0x23e/0x15f0
[<c03742e6>] schedule+0x2e6/0x510
[<c037455a>] preempt_schedule+0x4a/0x70
[<c037455a>] preempt_schedule+0x4a/0x70
[<c010171c>] __up+0x1c/0x20
[<c0373ffb>] __up_wakeup+0x7/0xc
[<c0375551>] .text.lock.kernel_lock+0x35/0x37
[<c019933b>] reiserfs_prepare_file_region_for_write+0x34b/0x920
[<c0199fa2>] reiserfs_file_write+0x692/0x6c0
[<c0131520>] file_read_actor+0x0/0xe0
[<c014f757>] vfs_write+0xd7/0x150
[<c014f8a1>] sys_write+0x51/0x80
[<c010272f>] syscall_call+0x7/0xb
Code: 31 c2 31 d1 8b 54 24 0c 81 e1 ff 1f 00 00 8b 84 8a 0c 01 00 00 85
c0 74 0c
/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux shepard 2.6.11.10BERNHADINERMBO.DE #3 Fri Jul 15 11:53:00 CEST
2005 i686 unknown unknown GNU/Linux
Gnu C 3.3.4
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.35
reiserfsprogs 3.6.18
reiser4progs line
quota-tools 3.12.
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Linux C++ Library 5.0.6
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 050
Modules Loaded
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1060.878
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr pni syscall mmxext 3dnowext 3dnow
bogomips : 2097.15
# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
0cf8-0cff : PCI conf1
8800-88ff : 0000:00:0c.0
8800-88ff : sym53c8xx
9000-903f : 0000:00:09.0
9000-903f : eepro100
9400-94ff : 0000:00:05.0
b000-b01f : 0000:00:04.3
b800-b80f : 0000:00:04.1
d000-dfff : PCI Bus #01
d800-d8ff : 0000:01:05.0
e000-e003 : 0000:00:00.0
e300-e37f : 0000:00:04.4
e400-e47f : motherboard
e400-e403 : PM1a_EVT_BLK
e404-e405 : PM1a_CNT_BLK
e408-e40b : PM_TMR
e410-e415 : ACPI CPU throttle
e420-e423 : GPE0_BLK
e800-e80f : 0000:00:04.4
e800-e80f : motherboard
e800-e80f : pnp 00:02
# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cd7ff : Adapter ROM
000d0000-000d35ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-00376836 : Kernel code
00376837-0045d37f : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
f1000000-f1000fff : 0000:00:0c.0
f1000000-f1000fff : sym53c8xx
f1800000-f18000ff : 0000:00:0c.0
f1800000-f18000ff : sym53c8xx
f2000000-f201ffff : 0000:00:09.0
f2800000-f2800fff : 0000:00:09.0
f2800000-f2800fff : eepro100
f3000000-f3dfffff : PCI Bus #01
f3000000-f3003fff : 0000:01:05.0
f3f00000-fb7fffff : PCI Bus #01
f4000000-f7ffffff : 0000:01:05.0
fb800000-fb800fff : 0000:00:00.0
fc000000-fdffffff : 0000:00:00.0
ffff0000-ffffffff : reserved
# lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fb800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP
Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f3000000-f3dfffff
Prefetchable memory behind bridge: f3f00000-fb7fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
Subsystem: Asustek Computer, Inc. A7M266 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 4: I/O ports at b800 [disabled] [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20, cache line size 08
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686
[Apollo Super ACPI] (rev 40)
Subsystem: Asustek Computer, Inc. A7M266 Mainboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 10)
Subsystem: Intel Corp.: Unknown device 0070
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 20 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f2800000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 9000 [size=64]
Region 2: Memory at f2000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0c.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
Subsystem: Unknown device dc93:2980
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 134 (7500ns min, 16000ns max), cache line size 10
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at f1800000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
01:05.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO
AGP 4x TMDS (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at f3000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f3fe0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DORS-32160 Rev: S82C
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
# cat /etc/raidtab
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
persistent-superblock 1
chunk-size 4
device /dev/sdb1
raid-disk 0
device /dev/sdc1
raid-disk 1
next reply other threads:[~2005-08-03 11:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-03 11:43 Daniel Walter [this message]
2005-08-04 6:09 ` ReiserFS crashing Jan Engelhardt
2005-08-04 6:23 ` Daniel Walter
2005-08-04 6:34 ` Jan Engelhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42F0ADEE.7020405@mbo.de \
--to=walter@mbo.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.