From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.dev.rtsoft.ru (RT-soft-2.Moscow.itn.ru [80.240.96.70]) by ozlabs.org (Postfix) with SMTP id 4F15267E9C for ; Thu, 4 Aug 2005 00:03:23 +1000 (EST) Message-ID: <42F0CEA9.3020505@ru.mvista.com> Date: Wed, 03 Aug 2005 18:03:21 +0400 From: Vitaly Bordug MIME-Version: 1.0 To: "Schaefer-Hutter, Peter" References: <8E342283C2100540AAC5D103097054776F851C@rcexc.racoms.loc> In-Reply-To: <8E342283C2100540AAC5D103097054776F851C@rcexc.racoms.loc> Content-Type: multipart/alternative; boundary="------------060304050205030102040200" Cc: linuxppc-embedded list Subject: Re: MPC885ADS and 2.6.13-rc5 - nogo ? List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is a multi-part message in MIME format. --------------060304050205030102040200 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Schaefer-Hutter, Peter wrote: >Hello Vitaly, > > > >>From: Vitaly Bordug [mailto:vbordug@ru.mvista.com] >> >>Mentioned support should work `out-of-the box`. >>Make sure you have console=ttyCPM0,115200 (or whatever baudrate you >>have) within bootargs in the U-Boot environment. U-Boot modification >> >> >is > > >>needed only if you wish to have both FEC MAC addresses configured via >>U-Boot env as well. Also only the related defconfig should be used. >> >> > >I have the bootargs, but still nogo - even with the mpc885ads_defconfig. > >Besides, in the mpc885ads_defconfig CONFIG_SCC3_ENET is set but in the >patch >description it reads as if only SCC1 is supported... > > Best Regards, > > Peter > > > The board does not hang - there's somithing with console since you don't see anything. Try to change BCSR_ADDR from 0xf4500000 to 0xf80...0 - the newer version of the boards may have this changed. -- Sincerely, Vitaly --------------060304050205030102040200 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Schaefer-Hutter, Peter wrote: 
Hello Vitaly, 

  
From: Vitaly Bordug [mailto:vbordug@ru.mvista.com] 

Mentioned support should work `out-of-the box`.
Make sure you have console=ttyCPM0,115200 (or whatever baudrate you 
have) within bootargs in the U-Boot environment. U-Boot modification
    
is 
  
needed only if you wish to have both FEC MAC addresses configured via 
U-Boot env as well. Also only the related defconfig should be used.
    

I have the bootargs, but still nogo - even with the mpc885ads_defconfig.

Besides, in the mpc885ads_defconfig CONFIG_SCC3_ENET is set but in the
patch
description it reads as if only SCC1 is supported...

 Best Regards,

  Peter
The board does not hang - there's somithing with console since you don't see anything.  Try to change BCSR_ADDR from 0xf4500000 to 0xf80...0 - the newer version of the boards may have this changed.


-- 
Sincerely, 
Vitaly
--------------060304050205030102040200--