Re: Adaptec i2o controller

[Jon Scottorn <jscottorn@possibilityforge.com>]

Thanks for the replies,

      After applying the patch, Now I get a compile error

drivers/scsi/dpt_i2o.c: In function `adpt_install_hba':
drivers/scsi/dpt_i2o.c:908: error: too few arguments to function
`pci_request_regions'
drivers/scsi/dpt_i2o.c: In function `adpt_isr':
drivers/scsi/dpt_i2o.c:2037: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2038: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2049: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2050: warning: passing arg 2 of `writel' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2053: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2055: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2062: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2069: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2076: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c: In function `adpt_i2o_to_scsi':
drivers/scsi/dpt_i2o.c:2246: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2250: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2255: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2266: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c: At top level:
drivers/scsi/dpt_i2o.c:171: warning: `dptids' defined but not used
make[3]: *** [drivers/scsi/dpt_i2o.o] Error 1
make[2]: *** [drivers/scsi] Error 2
make[1]: *** [drivers] Error 2

and I do have only one option selected in the .config file.

Any other thoughts?

Thanks,

Jon

Salyzyn, Mark wrote:

>This dpt_i2o patch *plus* the patch Markus submitted yesterday for the
>i2o driver to the kernel list need to be performed to create the mutual
>exclusion between the two drivers.
>
>Jon, just select one (CONFIG_SCSI_DPT_I2O) or the other (CONFIG_I2O) in
>your .config
>
>Sincerely -- Mark Salyzyn
>
>-----Original Message-----
>From: linux-scsi-owner@vger.kernel.org
>[mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of James Bottomley
>Sent: Tuesday, August 09, 2005 12:11 PM
>To: Jon Scottorn
>Cc: SCSI Mailing List
>Subject: Re: Adaptec i2o controller
>
>On Tue, 2005-08-09 at 09:59 -0600, Jon Scottorn wrote:
>  
>
>>  I have been running a 2.6.8 kernel with the adaptec i2o scsi
>>controller and I went to upgrade to the 2.6.12.4 kernel and when I
>>reboot into that kernel I get a kernel panic. I am wondering either
>>    
>>
>what
>  
>
>>I have done wrong or what has changed with the i2o driver between the
>>two kernels. 
>>Here is the error I get, I am summarizing because I have to type the
>>error in.
>>
>>EIP is at adpt_isr+0x175/0x1f2
>>then has a stack and call trace:
>>(#0001,*0):c01035b2 oops
>>kernel panic - not syncing: Fatal exception in interrupt
>>    
>>
>
>Could you try out the patch in this email:
>
>http://marc.theaimsgroup.com/?l=linux-scsi&m=112351014310129
>
>Thanks,
>
>James
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>  
>