From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001726]: Front and Rear channels swap after first play when playing Surround40 on au8830 Date: Fri, 10 Feb 2006 10:50:40 +0100 Message-ID: <42e61947467c4b9fd859f8ea2d721988@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [85.132.177.35]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id BB12318B for ; Fri, 10 Feb 2006 10:50:40 +0100 (MET) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: Raymond Assigned To: mjander ====================================================================== Project: ALSA - driver Issue ID: 1726 Category: PCI - au88x0 Reproducibility: always Severity: major Priority: normal Status: assigned Distribution: Fedora Core 1 Kernel Version: 2.4.22-1.2199.nptl ====================================================================== Date Submitted: 01-08-2006 17:41 CET Last Modified: 02-10-2006 10:50 CET ====================================================================== Summary: Front and Rear channels swap after first play when playing Surround40 on au8830 Description: The front and rear channels are correct for playing Surround40 only at the first time after the driver is loaded. The front and rear channels (Surround40) always swapped afterward using speaker-test or xine. Playing stereo sound is OK. speaker-test -c4 -D hw:0,0 speaker-test 1.0.11rc2 Playback device is hw:0,0 Stream parameters are 48000Hz, S16_LE, 4 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 2 to 8192 Period size range from 1 to 512 Periods = 4 Buffer time size 2525 To choose buffer_size = 8192 To choose period_size = 2048 was set period_size = 512 was set buffer_size = 8192 0 - Front Left 1 - Front Right 3 - Rear Right 2 - Rear Left Time per period = 11.856821 0 - Front Left 1 - Front Right 3 - Rear Right 2 - Rear Left ====================================================================== ---------------------------------------------------------------------- Raymond - 02-10-06 06:32 ---------------------------------------------------------------------- Since only the front channels are routed through the equalizer, you may use the graphic equalizer in the vortex control panel to monitor the peak http://alsa.opensrc.org/au88x0 ---------------------------------------------------------------------- ponchick - 02-10-06 10:50 ---------------------------------------------------------------------- I see very little diffrece between peaks. First time front left/right sounds a little louder (peaks are little higher) then on second run. Rear channels always sounds almost equally on any run (peaks are same). At home I have another au8830 on 32-bit UP (no hyperthreading) pentium4 but it little outdated. Today I get up-to-date kernel, alsa-* and this patch and try to play with it a little. Issue History Date Modified Username Field Change ====================================================================== 01-08-06 17:41 Raymond New Issue 01-08-06 17:41 Raymond Distribution => Fedora Core 1 01-08-06 17:41 Raymond Kernel Version => 2.4.22-1.2199.nptl 01-27-06 16:45 Raymond File Added: au88x0_surround40.patch 02-04-06 06:26 Raymond Note Added: 0007912 02-10-06 05:36 ponchick Note Added: 0007987 02-10-06 06:32 Raymond Note Added: 0007991 02-10-06 10:50 ponchick Note Added: 0007998 ====================================================================== ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642